Under Construction！

Prompt

Sorry that you are not authorized to download this document.

Apply précédente

AP7130DN-AC Indoor Dual-band AP

The AP7130DN-AC is a nice-looking indoor dual-band wireless access point (AP) that supports 3*3 MIMO, works at 2.4 GHz and 5 GHz frequency bands, and complies with IEEE 802.11a/b/g/n/ac. It can provide services simultaneously on the 2.4 GHz and 5 GHz frequency bands to support more access users, and can be used as a Fit AP. The AP7130DN-AC has the following advantages:
High reliability
High security
Simple network deployment
Automatic AC discovery and configuration
Real-time management and maintenance
The AP7130DN-AC is suitable for multi-service provisioning in enterprises and can be deployed in places with large or medium areas, high user density, and high bandwidth requirements, such as schools, government agencies, air ports, stations, and shopping malls.


Appearance

Ports

1.Console port.


2.ETH/PoE2: 10/100/1000M port, which connects to the Ethernet. The port can connect to a PoE switch or a PoE power source to provide power for APs.


3.ETH/PoE1: 10/100/1000M port, which connects to the Ethernet. The port can connect to a PoE switch or a PoE power source to provide power for APs.


4.Power input port: 12 V DC.


5.Lock port: protects the AP7030DN-AC against theft.



LED Indicators

Information Type Color Status Description
Default status after power-on Yellow Steady on The AP has been powered on, but the system software has not started.
Software startup Yellow Blinks (0.5 Hz) The system is loading software. This status lasts until software loading is completed.
Running Green Blinks (0.5 Hz) The system is running properly, the Ethernet connection is normal, and no wireless user is associated with the AP.
Steady on The system is running properly, the Ethernet connection is normal, and no wireless user is associated with the AP. The system is in low-power state (no data traffic is being transmitted, and the EEE function takes effect).
Alarm Yellow Blinks (4 Hz) The system is being upgraded. The CAPWAP link is torn down. The system has started but has not established a CAPWAP link.
Error Red Steady on A fault that affects services has occurred and cannot be automatically rectified. Manual intervention is required.

Highly Reliable Wireless Access

  • Complies with IEEE 802.11 a/b/g/n/ac
  • Supports 3×3 MIMO and provides a maximum rate of 1.3 Gbit/s for each radio
  • Supports 80MHz bandwidth
  • 256QAM modulation
  • Uses Wi-Fi Multimedia (WMM) to implement priority scheduling based on the service type (voice, video, or data), and supports priority mapping on the air interface and wired interface
  • Supports wired link integrity check
  • Supports load balancing
  • Supports roaming without service interruptions
  • Supports AC Dual-Link Backup
  • Supports the beamforming technique
  • Uses the latest 802.11ac chip to provide higher performance and wider coverage


Comprehensive User Access Control Capability

  • Supports access control lists (ACLs) and user access controls based on user group policies
  • Provides per-user bandwidth management
  • Supports user isolation policies
  • Supports uniform authentication by the AC


High Security

  • Wired Equivalent Privacy (WEP)
  • Wi-Fi Protected Access (WPA)/WPA2
  • WLAN Authentication and Privacy Infrastructure (WAPI)
  • 802.1x
  • Detection of unauthorized APs


Flexible Networking and Environment Adaptability

  • For use in Fit AP and WDS networking scenarios
  • Automatically selects the transmission rate, channel, and transmit power to adapt to multiple radio environments and limit interference in real time
  • Adjusts bandwidth allocation based on the number of users and radio environment
  • Supports the MIMO antenna system and connects to external dual-band antennas (2.4 GHz and 5 GHz). You can adjust the antennas based on the radio environment


Simple Device Management and Maintenance

  • Automatically discovers ACs and loads the AC (plug-and-play) configuration
  • Supports batch upgrade
  • Monitored by the NMS in real time. You can remotely configure APs and locate faults on APs using the NMS
  • Supports the Link Layer Discovery Protocol (LLDP) to implement automatic link discovery and obtain the network topology

WLAN Features

  • Compliance with IEEE 802.11a/b/g/n/ac, providing a maximum rate of 1.3 Gbit/s for each radio
  • Maximum ratio combining (MRC)
  • Maximum-likelihood detection (MLD)
  • Aggregate data units, including A-MPDU (Tx/Rx) and A-MSDU (Rx only)
  • 802.11 dynamic frequency selection (DFS)
  • Short GI in 20 MHz, 40MHz and 80MHz modes
  • 256QAM modulation
  • Priority mapping and packet scheduling based on a Wi-Fi Multimedia (WMM) profile to implement priority-based data processing and forwarding
  • Automatic and manual rate adjustment (the rate is adjusted automatically by default)
  • WLAN channel management and channel rate adjustment
  • Supports the FrameBurst function that can improve the peak throughput
  • Automatic channel scanning (the AP7030DN-AC scans channels used by other APs, measures their interference, and reports the scanning result to the AC to trigger channel adjustment)
  • Service set identifier (SSID) hiding
  • Signal sustain technology (SST)
  • Unscheduled automatic power save delivery (U-APSD)
  • Control and Provisioning of Wireless Access Points (CAPWAP)
  • Automatic AC discovery


Network Features

  • Compliance with IEEE 802.3u
  • Auto-negotiation of the rate and duplex mode and automatic switching between the Media Dependent Interface (MDI) and Media Dependent Interface Crossover (MDI-X) mode
  • VLAN assignment based on SSIDs
  • VLAN aggregation on uplink Ethernet ports
  • 4093 VLAN IDs (1-4093) and 16 virtual APs (VAPs)
  • Uplink ports in tagged and untagged mode
  • DHCP client
  • PPPoE dialup
  • Centralized data forwarding and local data forwarding
  • STA isolation in the same VLAN
  • ACL
  • LLDP
  • Uninterrupted service forwarding upon CAPWAP channel disconnection in direct forwarding mode
  • Uniform authentication on an AC
  • Dual-AC backup


QoS Features

  • Priority mapping and packet scheduling based on WMM profiles to implement priority-based data processing and forwarding
  • WMM parameter management for each radio frequency
  • WMM power saving
  • Priority mapping for upstream packets and flow-based mapping for downstream packets
  • Queue mapping and scheduling
  • User-based bandwidth limiting
  • Adaptive bandwidth allocation (the system dynamically adjusts bandwidth based on the number of users and radio environment)


Security Features

  • Open system authentication
  • WEP authentication/encryption
  • WPA/WPA2 authentication and encryption
  • 802.1x authentication and encryption
  • WAPI authentication and encryption


Maintenance Features

  • AP management and maintenance by the AC
  • Plug-and-play: automatic AC discovery and automatic configuration loading
  • Batch upgrade
  • Debugging using Telnet and the serial interface
  • Real-time configuration monitoring and fast fault location by using the NMS
  • System status alarm

Specifications

Item Description
Technical specifications Dimensions (H x W x D) 53 mm x 220 mm x 220 mm
Weight 1.3 kg
System memory 256 MB DRAM 32 MB flash memory
Power specifications Power input DC 12V±10% POE Power: -48V DC PoE function in compliance with IEEE 802.3at
Maximum power consumption 19W NOTE：The maximum power consumption depends on local laws.
Environment parameters Operating temperature -10°C to +50°C
Storage temperature -40°C to +70°C
Humidity 5% to 95% (non-condensing)
Waterproof grade IP31
Altitude –60 m to 4000 m



Antenna Parameters

Item Description
Antenna type Removable RP-SMA antenna
Antenna gain 2.4G: 2.5dBi 5G: 4dBi
Maximum number of concurrent users 128
Maximum transmit power 17 dBm You can adjust the transmit power from the maximum to 15 dBm, with a step of 1 dBm. NOTE：Actual transmit power depends on local laws and regulations.
Maximum number of non-overlapping channels 2.4 GHz 802.11b/g 20 MHz: 3 802.11n 20 MHz: 3 40 MHz: 1 5 GHz 802.11a 20 MHz: 24 802.11n 20 MHz: 24 40MHz: 11 80MHz: 3
NOTE：The number of non-overlapping channels allowed varies in different countries.
  802.11b: 1 Mbit/s, 2 Mbit/s, 5.5 Mbit/s, 11 Mbit/s
802.11g: 6 Mbit/s, 9 Mbit/s, 12 Mbit/s, 18 Mbit/s, 24 Mbit/s, 36 Mbit/s, 48 Mbit/s, 54 Mbit/s
802.11n data rate
MCS index GI=800ns GI=400ns
20 MHz (Mbit/s) 40MHz (Mbit/s) 20 MHz (Mbit/s) 40MHz (Mbit/s)
0 6.5 13.5 7.2 15
1 13 27 14.4 30
2 19.5 40.5 21.72 45
3 26 54 28.9 60
4 39 81 43.3 90
5 52 108 57.8 120
6 58.5 121.5 65 135
7 65 135 72.2 150
8 13 27 14.4 30
9 26 54 28.9 60
10 39 81 43.3 90
11 52 108 57.8 120
12 78 162 86.7 180
13 104 216 115.6 240
14 117 243 130 270
15 130 270 144.4 300
16 19.5 40.5 21.7 45
17 39 81 43.3 90
18 58.5 121.5 65 135
19 78 162 86.7 180
20 117 243 130 270
21 156 324 173.3 360
22 175.52 364.5 195 405
23 195 405 216.7 450
802.11ac data rate
MCS index NSS GI=800ns
20 MHz (Mbit/s) 40 MHz (Mbit/s) 80 MHz (Mbit/s)
0 1 6.5 13.5 29.3
1 1 13 27 58.5
2 1 19.5 40 87.8
3 1 26 54 117.0
4 1 39 81 175.5
5 1 52 108 234
6 1 58.5 121.5 263
7 1 65 135 292.5
8 1 78 162 351
9 1 - 180 390
0 2 13 27 58.5
1 2 26 54 117
2 2 39 81 175.5
3 2 52 108 234
4 2 78 162 351
5 2 104 216 468
6 2 117 243 526
7 2 130 270 585
8 2 156 324 702
9 2 - 360 780
0 3 19.5 40.5 87.8
1 3 39 81 175.5
2 3 58.5 121.5 263.3
3 3 78 162 351
4 3 117 243 526.5
5 3 156 324 702
6 3 175.5 364.5 789.8
7 3 195 405 877.5
8 3 234 486 1053
9 3 260 540 1170
MCS index NSS GI=400ns
20 MHz (Mbit/s) 40 MHz (Mbit/s) 80 MHz (Mbit/s)
0 1 7.2 15 32.5
1 1 14.4 30 65
2 1 21.7 45 97.5
3 1 28.9 60 130
4 1 43.3 90 195
5 1 57.8 120 260
6 1 65 135 292.5
7 1 72.2 150 325
8 1 86.7 180 390
9 1 - 200 433.3
0 2 14.4 30 65
1 2 28.9 60 130
2 2 43.3 90 195
3 2 57.8 120 260
4 2 96.7 180 390
5 2 115.6 240 520
6 2 130 270 585
7 2 144.4 300 65
8 2 173.3 360 780
9 2 - 400 866.7
0 3 21.7 45 97.5
1 3 43.3 90 195
2 3 65 135 292.5
3 3 86.7 180 390
4 3 130 270 585
5 3 173.3 360 780
6 3 195 405 877.5
7 3 216.7 450 975
8 3 260 540 1170
9 3 288.9 600 1300
NOTE： MCS: modulation coding scheme index, which determines the spatial stream quantity, modulation, coding rate, and data rate. GI: guard interval, the period in nanoseconds the radio listens between packets. The GI introduces immunity to propagation delays. NSS: number of spatial streams.
Receiver Sensitivity 2.4 GHz 802.11b (CCK) -96 dBm @ 1 Mb/s -91 dBm @ 2 Mb/s -91 dBm @ 5.5 Mb/s -88 dBm @ 11 Mb/s 2.4 GHz 802.11g (non-HT20) -91 dBm @ 6 Mb/s -90 dBm @ 9 Mb/s -89 dBm @ 12 Mb/s -86 dBm @ 18 Mb/s -83 dBm @ 24 Mb/s -80 dBm @ 36 Mb/s -76 dBm @ 48 Mb/s -74 dBm @ 54 Mb/s 2.4 GHz 802.11n (HT20) -91 dBm @ MCS0/8/16 -88 dBm @ MCS1/9/17 -86 dBm @ MCS2/10/18 -81 dBm @ MCS3/11/19 -78 dBm @ MCS4/12/20 -74 dBm @ MCS5/13/21 -72 dBm @ MCS6/14/22 -71 dBm @ MCS7/15/23 2.4 GHz 802.11n (HT40) -86 dBm @ MCS0/8/16 -86 dBm @ MCS1/9/17 -84 dBm @ MCS2/10/18 -80 dBm @ MCS3/11/19 -77 dBm @ MCS4/12/20 -72 dBm @ MCS5/13/21 -70 dBm @ MCS6/14/22 -68 dBm @ MCS7/15/23 5 GHz 802.11a (non-HT20) -89 dBm @ 6 Mb/s -88 dBm @ 9 Mb/s -86 dBm @ 12 Mb/s -83 dBm @ 18 Mb/s -80 dBm @ 24 Mb/s -77 dBm @ 36 Mb/s -73 dBm @ 48 Mb/s -71 dBm @ 54 Mb/s
5 GHz 802.11n (HT20) -90 dBm @ MCS0/8/16 -85 dBm @ MCS1/9/17 -84 dBm @ MCS2/10/18 -78 dBm @ MCS3/11/19 -75 dBm @ MCS4/12/20 -71 dBm @ MCS5/13/21 -70 dBm @ MCS6/14/22 -68 dBm @ MCS7/15/23 5 GHz 802.11n (HT40) -85 dBm @ MCS0/8/16 -82 dBm @ MCS1/9/17 -79 dBm @ MCS2/10/18 -75 dBm @ MCS3/11/19 -72 dBm @ MCS4/12/20 -68 dBm @ MCS5/13/21 -66 dBm @ MCS6/14/22 -64 dBm @ MCS7/15/23 5 GHz 802.11ac (VHT20) -90 dBm @ MCS0&NSS1 -87 dBm @ MCS1&NSS1 -85 dBm @ MCS2&NSS1 -82 dBm @ MCS3&NSS1 -78 dBm @ MCS4&NSS1 -74 dBm @ MCS5&NSS1 -73 dBm @ MCS6&NSS1 -72 dBm @ MCS7&NSS1 -67 dBm @ MCS8&NSS1 -65 dBm @ MCS9&NSS1 5 GHz 802.11ac (VHT40) -87 dBm @ MCS0&NSS1 -84 dBm @ MCS1&NSS1 -82 dBm @ MCS2&NSS1 -79 dBm @ MCS3&NSS1 -75 dBm @ MCS4&NSS1 -71 dBm @ MCS5&NSS1 -70 dBm @ MCS6&NSS1 -69 dBm @ MCS7&NSS1 -64 dBm @ MCS8&NSS1 -62 dBm @ MCS9&NSS1 5 GHz 802.11ac (VHT80) -84 dBm @ MCS0&NSS1 -81 dBm @ MCS1&NSS1 -79 dBm @ MCS2&NSS1 -76 dBm @ MCS3&NSS1 -72 dBm @ MCS4&NSS1 -68 dBm @ MCS5&NSS1 -67 dBm @ MCS6&NSS1 -66 dBm @ MCS7&NSS1 -61 dBm @ MCS8&NSS1 -59 dBm @ MCS9&NSS1

The AP7030DN-AC is recommended for use in buildings with a simple structure, small area, a high density of users, and requires a high capacity, for example, small-scale meeting rooms, bars, and entertainment places. The AP7030DN-AC APs can be flexibly deployed in these places and work in both Fit AP and bridge mode.


Fit AP Networking

In this networking, the AP7030DN-AC functions as a Fit AP that provides only data forwarding functions. The AC is responsible for user access, authentication, AP management, and configurations of security protocols, routing, and QoS.


WDS Networking (Point-to-Point)

WDS Networking (Point-to-Multipoint)

In this networking, the AP7030DN-AC connects two or more independent wired or wireless LANs through wireless links. In a Wireless Distribution System
 (WDS), the AP7030DN-AC supports point-to-point, point-to-multipoint, and multipoint-to-multipoint networking modes.



Utiles Produits