Under Construction！

Prompt

Sorry that you are not authorized to download this document.

Apply précédente

AP7110SN-GN Indoor Single-band AP

The AP7110SN-GN is a premium series single-band access point (AP) that supports 3*3 MIMO and 2.4 GHz. It complies with IEEE 802.11b/g/n, and works as a Fit AP. The AP7110SN-GN has the following advantages:
High reliability
High security
Simple network deployment
Automatic AC discovery and configuration
Real-time management and maintenance
The AP7110SN-GN integrates the latest and widely-used WLAN technology to provide high-performance wireless services for medium to large enterprises and high-density scenarios. The AP7110SN-GN APs can be flexibly deployed in these places.


Appearance

Ports

1.Ground port: connects to a ground cable to ground an AP.


2.Console port.


3.ETH/PoE: 10/100/1000M port, which connects to the Ethernet. The port can connect to a PoE switch or a PoE power source to provide power for APs.


4.Default: restores factory settings.


5.Power input port: 12 V DC.


6.Lock port: protects the AP7110SN-GN against theft.



LED Indicators

Information Type SYS Link Wireless Description
Startup status Steady green Off Off The AP is starting.
Blinking green Off Off The system is working properly.
Steady red Off Off The system fails to load the DRAM or system software.
Service status indicator Blinking (0.5 Hz) Off Off The system is working properly, but the Ethernet is not connected and radios are disabled.
Blinking (0.5 Hz) Off Blinking green The system is working properly, but the Ethernet is not connected. The AP has wireless users connected and is transmitting data traffic. The indicator blinks more quickly when more data is being transmitted.
Blinking (0.5 Hz) Steady or blinking green Off The system is working properly, and the Ethernet is connected. Radios are disabled, and no wireless users are connected to the AP. The indicator blinks more quickly when more data is being transmitted.
Blinking (0.5 Hz) Steady or blinking green Blinking green The system is working properly, and the Ethernet is connected. The AP has wireless users connected and is transmitting data traffic. The indicator blinks more quickly when more data is being transmitted.

Highly reliable wireless access

  • Complies with IEEE 802.11 b/g/n.
  • Supports3x3 MIMO and provides a maximum rate of 450 Mbit/s
  • Uses Wi-Fi Multimedia (WMM) to implement priority scheduling based on the service type (voice, video, or data), and supports priority mapping on the air interface and wired interface.
  • Supports wired link integrity check.
  • Supports load balancing.
  • Supports roaming without service interruptions.
  • Supports AC Dual-Link Backup.
  • Supports the beamforming technique.
  • Uses the latest 802.11n chip to provide higher performance and wider coverage.
  • Has a strong coverage capability.


Comprehensive user access control capability

  • Supports access control lists (ACLs) and user access controls based on user group policies.
  • Provides per-user bandwidth management.
  • Supports user isolation policies.
  • Supports AC authentication.


High security

  • Wired Equivalent Privacy (WEP)
  • Wi-Fi Protected Access (WPA)/WPA2
  • WLAN Authentication and Privacy Infrastructure (WAPI)
  • 802.1x
  • Detection of unauthorized APs


Flexible networking and environment adaptability

  • For use in Fit AP and WDS networking scenarios.
  • Automatically selects the transmission rate, channel, and transmit power to adapt to multiple radio environments and limit interference in real time.
  • Adjusts bandwidth allocation based on the number of users and radio environment.


Simple device management and maintenance

  • Automatically discovers ACs and loads the AC (plug-and-play) configuration.
  • Supports batch upgrade.
  • Monitored by the NMS in real time. You can remotely configure APs and locate faults on APs using the NMS.
  • Supports the Link Layer Discovery Protocol (LLDP) to implement automatic link discovery and obtain the network topology.

WLAN features

  • Compliance with IEEE 802.11b/g/n, providing a maximum rate of 450 Mbit/s
  • Maximum ratio combining (MRC)
  • Maximum-likelihood detection (MLD)
  • Aggregate data units, including A-MPDU (Tx/Rx) and A-MSDU (Rx only)
  • 802.11 dynamic frequency selection (DFS)
  • Short GI in 20 MHz and 40 MHz modes
  • Priority mapping and packet scheduling based on a Wi-Fi Multimedia (WMM) profile to implement priority-based data processing and forwarding
  • Automatic and manual rate adjustment (the rate is adjusted automatically by default)
  • WLAN channel management and channel rate adjustment
  • Automatic channel scanning
  • Service set identifier (SSID) hiding
  • Signal sustain technology (SST)
  • Unscheduled automatic power save delivery (U-APSD)
  • Control and Provisioning of Wireless Access Points (CAPWAP)
  • Automatic AC discovery


Network features

  • Compliance with IEEE 802.3u
  • Ports: Auto-negotiation of the rate and duplex mode and automatic switching between the Media Dependent Interface (MDI) and Media Dependent Interface Crossover (MDI-X) mode
  • VLAN assignment based on SSIDs
  • VLAN aggregation on uplink Ethernet ports
  • 4093 VLAN IDs (1-4093) and 16 virtual APs (VAPs)
  • Uplink ports in tagged and untagged mode
  • DHCP client
  • PPPoE dialup
  • Centralized data forwarding and local data forwarding
  • STA isolation in the same VLAN
  • ACL
  • LLDP
  • Uninterrupted service forwarding upon CAPWAP channel disconnection in direct forwarding mode
  • Uniform authentication on an AC
  • Dual-AC backup


QoS features

  • Priority mapping and packet scheduling based on WMM profiles to implement priority-based data processing and forwarding
  • WMM parameter management for each radio frequency
  • WMM power saving
  • Priority mapping for upstream packets and flow-based mapping for downstream packets
  • Queue mapping and scheduling
  • User-based bandwidth limiting
  • Adaptive bandwidth allocation (the system dynamically adjusts bandwidth based on the number of users and radio environment)


Security features

  • Open system authentication
  • WEP authentication/encryption
  • WPA/WPA2 authentication and encryption
  • 802.1x authentication and encryption
  • WAPI authentication and encryption
  • SMS4 decryption for data packets
  • Wired link integrity check (the AP stops sending radio signals if the tunnel between the AP and AC is terminated)


Maintenance features

  • AP management and maintenance by the AC
  • Plug-and-play: automatic AC discovery and automatic configuration loading
  • Batch upgrade
  • Debugging using Telnet and the serial interface
  • Real-time configuration monitoring and fast fault location by using the NMS
  • System status alarm

Specifications

Item Description
Technical specifications Dimensions (H x W x D) 45 mm x 200 mm x 200 mm
Weight 1.0 kg
System memory 256 MB DRAM 32 MB flash memory
Power specifications Power input DC 12V±10% POE Power: -48V DC PoE function in compliance with IEEE 802.3af and 802.3at
Maximum power consumption 8.7W NOTE:The maximum power consumption depends on local laws.
Environment parameters Operating temperature -10℃ to +55℃
Storage temperature -40℃ to +70℃
Humidity 5% to 95% (non-condensing)
Waterproof grade IP41
Altitude –60 m to 4000 m



Antenna Parameters

Item Description
Antenna type External antenna
Antenna gain 2.4GHz: 2.5 dBi
Maximum number of concurrent users 128
Maximum transmit power 20dBm You can adjust the transmit power from the maximum to 15 dBm, with a step of 1 dBm. NOTE:Actual transmit power depends on local laws and regulations.
Maximum number of non-overlapping channels 802.11b/g 20 MHz: 3 802.11n 20 MHz: 3 40 MHz: 1 NOTE:The number of non-overlapping channels allowed varies in different countries. For details, see the Country codes & Channels compliance status
Channel rate 802.11b: 1, 2, 5.5, and 11 Mbit/s
802.11g: 6, 9, 12, 18, 24, 36, 48, and 54 Mbit/s
802.11n: 2.4 GHz
GI=800ns GI=400ns
20MHz(Mb/s) 40MHz(Mb/s) 20MHz(Mb/s) 40MHz(Mb/s)
6.5 @ MCS0 13.5 @ MCS0 7.2 @ MCS0 15 @ MCS0
13 @ MCS1 27 @ MCS1 14.4 @ MCS1 30 @ MCS1
19.5 @ MCS2 40.5 @ MCS2 21.7 @ MCS2 45 @ MCS2
26 @ MCS3 54 @ MCS3 28.9 @ MCS3 60 @ MCS3
39 @ MCS4 81 @ MCS4 43.3 @ MCS4 90 @ MCS4
52 @ MCS5 108 @ MCS5 57.8 @ MCS5 120 @ MCS5
58.5 @ MCS6 121.5 @ MCS6 65 @ MCS6 135 @ MCS6
65 @ MCS7 135 @ MCS7 72.2 @ MCS7 150 @ MCS7
13 @ MCS8 27 @ MCS8 14.4 @ MCS8 30 @ MCS8
26 @ MCS9 54 @ MCS9 28.9 @ MCS9 60 @ MCS9
39 @ MCS10 81 @ MCS10 43.3 @ MCS10 90 @ MCS10
52 @ MCS11 108 @ MCS11 57.8 @ MCS11 120 @ MCS11
78 @ MCS12 162 @ MCS12 86.7 @ MCS12 180 @ MCS12
104 @ MCS13 216 @ MCS13 115.6 @ MCS13 240 @ MCS13
117 @ MCS14 243 @ MCS14 130 @ MCS14 270 @ MCS14
130 @ MCS15 270 @ MCS15 144.4 @ MCS15 300 @ MCS15
19.5 @ MCS16 40.5 @ MCS16 21.7 @ MCS16 45 @ MCS16
39 @ MCS17 81 @ MCS17 43.3 @ MCS17 90 @ MCS17
58.5 @ MCS18 121.5 @ MCS18 65 @ MCS18 135 @ MCS18
78 @ MCS19 162 @ MCS19 86.7 @ MCS19 180 @ MCS19
117 @ MCS20 243 @ MCS20 130 @ MCS20 270 @ MCS20
156 @ MCS21 324 @ MCS21 173.3 @ MCS21 360 @ MCS21
175.5 @ MCS22 364.5 @ MCS22 195 @ MCS22 405 @ MCS22
195 @ MCS23 405 @ MCS23 216.7 @ MCS23 450 @ MCS23
NOTE:Modulation coding scheme (MCS) index: determines the spatial flow quantity, modulation, coding rate, and data rate. Guard interval (GI): indicates the period in nanoseconds the radio listens between packets. In some countries or regions that require FCC certification, the 40 MHz mode cannot be used due to legislative restriction.
Receiver sensitivity 802.11b (CCK) -97 dBm @ 1 Mb/s -92 dBm @ 2 Mb/s -92 dBm @ 5.5 Mb/s -89 dBm @ 11 Mb/s 802.11g (non-HT20) -91 dBm @ 6 Mb/s -90 dBm @ 9 Mb/s -90 dBm @ 12 Mb/s -88 dBm @ 18 Mb/s -84 dBm @ 24 Mb/s -81 dBm @ 36 Mb/s -77 dBm @ 48 Mb/s -74 dBm @ 54 Mb/s
802.11n(HT20) -90 dBm @ MCS0/8/16 -90 dBm @ MCS1/9/17 -88 dBm @ MCS2/10/18 -82 dBm @ MCS3/11/19 -79 dBm @ MCS4/12/20 -75 dBm @ MCS5/13/21 -73 dBm @ MCS6/14/22 -72 dBm @ MCS7/15/23 802.11n(HT40) -86 dBm @ MCS0/8/16 -86 dBm @ MCS1/9/17 -84 dBm @ MCS2/10/18 -80 dBm @ MCS3/11/19 -77 dBm @ MCS4/12/20 -72 dBm @ MCS5/13/21 -70 dBm @ MCS6/14/22 -68 dBm @ MCS7/15/23

The AP7110SN-GN is recommended for use in buildings with a simple structure, small area, a high density of users, and require a high capacity, for example, small-scale meeting rooms, bars, and entertainment places.


Fit AP networking：

In this networking, the AP7110SN-GN functions as a Fit AP that provides only data forwarding functions. The AC is responsible for user access, authentication, AP management, and configurations of security protocols, routing, and QoS.



Utiles Produits