Highly reliable wireless access

• Complies with IEEE 802.11 a/b/g/n
• Provides a maximum rate of 300 Mbit/s for each radio
• Uses Wi-Fi Multimedia (WMM) to implement priority scheduling based on the service type (voice, video, or data), and implements end-to-end QoS through priority mapping on wireless and wired interfaces
• Supports wired link integrity check
• Supports load balancing
• Supports roaming without service interruptions
• Supports AC hot standby
• Supports the beamforming technique
• Uses the latest 80211n chip to increase the performance by 20%
• Has a strong coverage capability
• Uses a metal shell and a design that dissipates heat for high reliability

Comprehensive user access control capability

• Supports access control lists (ACLs) and user access controls based on user group policies
• Provides per-user bandwidth management
• Supports user isolation policies

High security

• Wired Equivalent Privacy (WEP)
• Wi-Fi Protected Access (WPA)/WPA2
• WLAN Authentication and Privacy Infrastructure (WAPI)
• 802.1x
• Detection of unauthorized APs

Flexible networking and environment adaptability

• For use in Fit AP and WDS networking scenari
• Automatically selects the transmission rate, channel, and transmit power to adapt to multiple radio environments and limit interference in real time.
• Adjusts bandwidth allocation based on the number of users and radio environment.
• Supports the MIMO antenna system and connects to external dual-band antennas (2.4 GHz and 5 GHz). You can adjust the antennas based on the radio environment

Simple device management and maintenance

• Automatically discovers ACs and loads the AC (plug-and-play) configuration.
• Supports batch upgrade
• Monitored by the NMS in real time. You can remotely configure APs and locate faults on APs using the NMS
• Supports the Link Layer Discovery Protocol (LLDP) to implement automatic link discovery and obtain the network topology

High reliability and protection level

• Uses efficient hardware protection measures
• Supports wide variations in temperate from -40℃ to +60℃
• Uses industry-standard components
• Provides IP66 protection level.
• Has built-in 5 kA surge protection and requires no external surge protection devices. This simplifies installation and lowers costs
• Provides 6 kA/6 kV surge protection capability on an Ethernet interface

WLAN features

• Compliance with IEEE 802.11a/b/g/n, providing a maximum rate of 300 Mbit/s for each radio
• Priority mapping and packet scheduling based on a Wi-Fi Multimedia (WMM) profile to implement priority-based data processing and forwarding
• Automatic and manual rate adjustment (the rate is adjusted automatically by default)
• WLAN channel management and channel rate adjustment
• Automatic channel scanning (the AP6510DN scans channels used by other APs, measures their interference, and reports the scanning result to the AC to trigger channel adjustment)
• Service set identifier (SSID) hiding
• Signal sustain technology (SST)
• STA power-saving mode
• Control and Provisioning of Wireless Access Points (CAPWAP)
• Automatic AC discovery

Network features

• Compliance with IEEE 802.3u
• Ports: Auto-negotiation of the rate and duplex mode and automatic switching between the Media Dependant Interface (MDI) and Media Dependant Interface Crossover (MDI-X) mode
• 1024 unicast MAC addresses
• VLAN assignment based on SSIDs
• VLAN aggregation on uplink Ethernet ports
• 4093 VLAN IDs (1-4093) and 16 virtual APs (VAPs)
• Uplink ports in tagged and untagged mode
• DHCP client
• PPPoE dialup
• Centralized data forwarding and local data forwarding
• STA isolation in the same VLAN
• ACL
• LLDP

QoS features

• Priority mapping and packet scheduling based on WMM profiles to implement priority-based data processing and forwarding
• WMM parameter management for each radio frequency
• WMM power saving
• Priority mapping for upstream packets and flow-based mapping for downstream packets
• Queue mapping and scheduling
• User-based bandwidth limiting
• Adaptive bandwidth allocation (the system dynamically adjusts bandwidth based on the number of users and radio environment)

Security features

• Open system authentication
• WEP authentication/encryption
• WPA/WPA2 authentication and encryption
• 802.1x authentication and encryption
• WAPI authentication and encryption
• SMS4 decryption for data packets
• Wired link integrity check (the AP stops sending radio signals if the tunnel between the AP and AC is terminated)

Maintenance features

• AP management and maintenance by the AC
• Plug-and-play: automatic AC discovery and automatic configuration loading
• Batch upgrade
• Debugging using Telnet and the serial interface
• Real-time configuration monitoring and fast fault location by using the NMS
• System status alarm

Specifications

Antenna Parameters

Appearance

Ports

1. ETH/PoE: 10/100/1000M port, which connects to the Ethernet network. The port can connect to a PoE switch or a PoE power source to receive power.

2. Ground point: connects to a ground cable.

3. 2.4 GHz antenna port.

4. 5 GHz antenna port..

LED Indicators

The AP6510DN is recommended for use in residential or commercial properties without wired resources. The AP6510DN APs can be deployed at both ends of a commercial street or in the building opposite to a commercial property. The APs must be equipped with external antennas to implement wireless signal coverage.

Fit AP networking：

In this networking, the AP6510DN functions as a Fit AP that provides only data forwarding functions. The AC is responsible for user access, authentication, AP management, and configurations of security protocols, routing, and QoS.

WDS networking (point-to-point):

WDS networking (point-to-multipoint):

In this networking, the AP6510DN connects two or more independent wired or wireless LANs through wireless links. In a Wireless Distribution System
 (WDS), the AP6510DN supports point-to-point, point-to-multipoint, and multipoint-to-multipoint networking modes. The AP implements wireless bridging and access functions using 5 GHz and 2.4 GHz frequency bands.