Under Construction!

Prompt

Sorry that you are not authorized to download this document.

Apply précédente

UGW9811

The eWBB2.0 UGW9811, developed by Huawei, is intended for use on the evolved packet core (EPC) system only. In this document, the eWBB2.0 UGW9811 is abbreviated as the UGW9811.
The UGW9811 combines the functions of a serving gateway (S-GW) and a PDN gateway (P-GW).


Carrier-class Platform

The hardware platform provides a large data throughput, and the software platform seamlessly integrates the wireless telecommunications technologies and data communications technologies.


The hardware platform of the UGW9811 is Huawei Universal Switching Router (USR). The USR is a carrier-class network switching device that conforms to the industry standards. The software of the UGW9811 is developed based on Huawei Versatile Routing Platform (VRP) and integrates the routing technology of the VRP, IP quality of service (QoS) technology, virtual private network (VPN) technology, and security technology in data communications. In addition, the software provides enhanced functions related to applications in wireless telecommunication.


The UGW9811 provides a flexible solution to wireless data communications for network carriers because the hardware platform of the USR provides high reliability and large data throughput and the software platform seamlessly integrates the wireless telecommunications technologies and data communications technologies.



High Reliability

In order to ensure the availability of the UGW9811, reliability of hardware, software, and networking are all focal points when the UGW9811 is designed.


    • Hardware reliability
      The UGW9811 adopts the industry-leading network processors. The primary boards are hot-swappable and provide the hot backup function. The UGW9811 uses a dual-power supply system and has over-voltage and over-current protection.
    • Software reliability
      The UGW9811 provides diverse features to ensure software reliability, such as overload control, traffic control, resource check, automatic fault detection, charging data record (CDR) cache, and hot patching.
    • Networking reliability
      The UGW9811 provides route backup and route load-sharing modes and the Eth-trunk interface function to prevent adverse impacts of single-node or single-interface failures and ensure high network reliability.


    High Security

    In addition to reliability, carriers and subscribers are also concerned with security. The UGW9811 adopts the following measures to safeguard their benefits:


    • Verification of operator identities
    • Two authentication modes: Password Authentication Protocol (PAP) and Challenge Handshake Authentication Protocol (CHAP)
    • Packet filtering and access control list (ACL) mechanism for filtering packets based on preset conditions
    • SGi interface redirection to prevent packet attacks between UEs on the same UGW9811
    • IPSec for providing IP packets with high-quality, interoperable, and cryptology-based security

Performance Specifications

Parameter Specifications
Maximum number of activated bearer contexts SPUs in active/standby mode 20,000
Maximum data throughput SPUs in active/standby mode 4 Gbit/s
Maximum IPSec throughput 100 Mbit/s
Maximum number of APNs 50
Maximum number of GRE tunnels 50
Maximum number of L2TP tunnels 50
Maximum number of IPSec tunnels 50



Cabinet Specifications

Item Specifications
Cabinet type N68E-22 cabinet
Dimensions Height: 2200 mm
Width: 600 mm
Depth: 800 mm
Weight 220 kg (full configuration)
Load-bearing requirement for the floor in the equipment room > 600 kg/m²
Power input -48 V DC to -60 V DC
Typical power consumption of the subrack 3300 W (full configuration)
Noise (acoustic power) Equal to or lower than 72 dBA at 23°C (varying with the ambient temperature)



Reliability Specifications

Item Specifications
Annual repair and return rate of boards ≤ 3%
Availability ≥ 99.999%
MTBF 250,000 hours
MTTR 1 hour
Annual mean failure time < 5 minutes
Board switchover time < 5 seconds
Board restart time < 5 minutes
System restart time < 6 minutes
Start time from system power-on to service-ready < 10 minutes



Reliability Specifications

Item Specifications
Annual repair and return rate of boards ≤ 3%
Availability ≥ 99.999%
MTBF 250,000 hours
MTTR 1 hour
Annual mean failure time < 5 minutes
Board switchover time < 5 seconds
Board restart time < 5 minutes
System restart time < 6 minutes
Start time from system power-on to service-ready < 10 minutes