SmartAX MA5669
The SmartAX MA5669 is an industry-leading remote multi dwelling unit (MDU) launched by Huawei, which provides broadband services on the Fiber To The Building (FTTB) network and POE function on a passive optical network (PON). The MA5669 is a integrated box-type device and providing one GPON or GE uplink port, 2 channel GE access (POE build-in) in user side. The MA5669 features a broad temperature range, low power consumption, mute design, high stability, and can be used on WLAN backhaul scenario and support wall-mounting, pole installation, cable installation, meeting broadband and AP backhaul deployment.
MA5669 support POE function, which suit for WLAN backhaul and video monitoring scenario, MA5669 connects to the optical line terminal (OLT) through the GPON interface. In the downstream direction MA5669 connects to AP or camera by using the category-5 cable and POE power cascaded on the cable to provide high-bandwidth broadband.
- Automatic adaptation to GPON and GE modes: The MA5669 provides one uplink port using the small form-factor pluggable (SFP) optical modules to meet different site requirements.
- Plug-and-play (PnP) service provisioning: The MA5669 allows remote issuing of configuration. A management channel and service channel are created after theMA5669 is powered on and registers successfully. Manual onsite configuration is not required.
- High reliability: The MA5669 supports the working temperature from –40℃ to 55℃, 6kV lightning protection.
- Suit for WiFi and video monitoring scenario: support POE function, lower investment and fast service deployment.
- Support IEEE 802.3af (15.4W) and IEEE802.3at (30W) protocol for each port.
- Integrated device, easy installation, support wall-mounting, Cable installation, Pole installation.
| GPON
|
ITU G.984-compliance
|
| 32 T-CONTs
|
| 1000 GEM ports
|
| Broadband
|
4096 VLANs, supporting QinQ and stacking VLANs
|
| 4096 MAC addresses, supporting VMAC
|
| 802.1p, supporting PQ and WRR flow control, and ACL
|
| Multicast
|
IGMPv2 and IGMPv3
IGMP proxy and IGMP snooping
A maximum of 1024 configurable multicast programs in the system
A maximum of 48 multicast users
A maximum of 16 concurrent multicast programs for each user
|
| Security
|
PPPoE+ and DHCP option82
|
| Static and dynamic MAC address binding
|
| Anti-MAC and anti-IP spoofing; source MAC address and IP address filtering
|
| Anti-DoS attack and firewall
|
| Maintenance and management
|
Supports SNMPv1, SNMPv2, and SNMPv3
|
| Supports Telnet and SSHv2
|
| Remote and batch pre-deployment
|
| Remote upgrade and monitoring
|
| Dimensions (H×W×D)
|
307.8×222.5×148.1mm (W*D*H）
|
| Network-side port
|
The MA5669 provides one uplink port that uses the SFP optical modules and automatically adapt to multiple modes, including GPON and GE. The uplink ports can be configured as follows:
1*GPON
1*GE (optical)
|
| User-side port
|
2*GE (electrical) +2*POE
2*GE (electrical)
|
| Operating temperature
|
–40℃ to +55℃; startup at –25℃
|
| Humidity
|
5% to 95% (non-condensing)
|
| Heat dissipation mode
|
Passive cooling without fan
|
| Lighting proof
|
6kV
|
| Power supply
|
AC: 220 V/110 V
|
| Weight
|
3.7 kg
|
