SmartAX MA5628
The SmartAX MA5628 (the MA5628 for short) is an industry-leading remote multi dwelling unit (MDU) launched by Huawei, which provides leased line services on a passive optical network (PON).
The MA5628 is a box-type device measuring 1-U high and 19-inch wide and providing two GPON uplink ports, four GE or FE ports, and four E1 ports. The MA5628 features a broad temperature range, low power consumption, mute design, high stability, environment friendlily and energy conservation, and can be used on workbenches and installed in corridors and cabinets, meeting leased line service deployment of customers.
- Support for multiple clock synchronization technologies, such as synchronous Ethernet, E1 line clocks and GPON line clocks.
- Operable IPTV services: Strong service switching capability, packet forwarding capability, and high integration (data exchange and user management) enable the MA5628 to have carrier-class multicast operation capability.
- Plug-and-play (PnP) service provisioning: The MA5628 allows remote issuing of configuration. A management channel and service channel are created after the MA5628 is powered on and registers successfully. Manual onsite configuration is not required.
- Efficient management and maintenance: free of field software commissioning, remote acceptance, remote upgrade and patch installation, and remote fault location.
- High reliability: The MA5628 supports the working temperature from -40℃ to 55℃, 6 kV lightning protection, and corrosion-proof design of boards.
- Prudent security measures: The MA5628 meets security requirements of telecom services to ensure system and user security.
| SmartAX MA5628
|
| Dimensions
(H×W×D)
|
43.6 mm × 442 mm × 245 mm
|
| Network-side port
|
2 × EPON
2 × GPON
|
| User-side port
|
4 × GE/FE (electrical) + 4 × E1
|
| Operating
temperature
|
-40℃ to +55℃; startup at -25℃
|
| Humidity
|
5% to 95% (non-condensing)
|
| Heat Dissipation mode
|
Not providing fans; passive cooling
|
| Lightning Protection capability
|
6 KV
|
| Power supply
|
AC: 220 V/110 V；DC: -48 V
|
| Weight
|
1.5 kg
|
For a traditional private branch exchange (PBX) and router, the MA5628 provides a TDM E1 port to transmit leased line services to the OLT by using the native TDM technology. For an IP PBX and router, the MA5628 provides an FE or GE port to transmit leased line services to the OLT by using Layer 2 transparent transmission technology.
Enterprise leased line scenario
| SmartAX MA5628
|
| GPON
|
ITU G.984-compliance
|
| 32 T-CONTs
|
| 1024 GEM ports
|
| Broadband
|
4096 VLANs, supporting QinQ and stacking VLANs
|
| 4096 MAC addresses，supporting VMAC
|
| 802.1p, supporting PQ and WRR flow control, and ACL
|
| Leased line
service
|
Native TDM
|
| Clock source recovery of the E1 port
|
| Loopback, blocking and unblocking of the E1 port
|
| Multicast
|
IGMPv2 and IGMPv3
|
| IGMP proxy and IGMP snooping
|
A maximum of configurable 1024 multicast programs in the system
A maximum of 48 multicast users
A maximum of 16 concurrent multicast programs for each user
|
| Security
|
PPPoE+ and DHCP option82
|
| Static and dynamic MAC address binding
|
| Anti-MAC and anti-IP spoofing; source MAC address and IP address filtering
|
| Anti-DoS attack and firewall
|
Maintenance
and
management
|
SNMPv1, SNMPv2, and SNMPv3
|
| Telnet and SSHv2
|
| Remote and batch pre-deployment
|
| Remote upgrade and monitoring
|
