SmartAX MA5621
The SmartAX MA5621 (MA5621 for short) is the first multi-dwelling unit (MDU) specifically designed for smart grid telecommunication in the industry, which supports natural heat dissipation and provides 2*GE/2*GPON uplink ports and 4*GE/FE+4*RS232 user ports. The MA5621 allows terminal units to remotely collect and transmit required information, for example, to remotely control the power, monitor environment safety, and read meters for billing. The MA5621 also can be used for video monitor services. The MA5621 features a broad temperature range, broad voltage range, low-power consumption, and high stability, and can be used on workbenches and installed in corridors and cabinets.
The SmartAX MA5621 (MA5621 for short) is the first multi-dwelling unit (MDU) specifically designed for smart grid telecommunication in the industry, which supports natural heat dissipation and provides 2×GE/2×GPON uplink ports and 4×GE/FE+4×RS232 user ports. The MA5621 allows terminal units to remotely collect and transmit required information, for example, to remotely control the power, monitor environment safety, and read meters for billing. The MA5621 also can be used for video monitor services. The MA5621 features a broad temperature range, broad voltage range, low-power consumption, and high stability, and can be used on workbenches and installed in corridors and cabinets.
- Automatic adaptation to GPON and GE modes: The MA5621 provides two uplink ports that use the small form-factor pluggable (SFP) optical modules to meet different site requirements.
- Hand-in-hand PON protection..
- Sealed casting aluminum shell and natural heat dissipation (water-proof, dust-proof, and corrosion-proof).
- Auto-adaptive GE/FE electrical ports and configurable RS232 serial ports, reducing the number of maintenance times.
- Support for 6 kV surge protection capability, applying to thunderous and rainy areas.
- Support for the working temperature ranging from -40℃ to 70℃, meeting extreme weather conditions.
- Auto-adaptive 9-60 V direct current (DC) input and 90-290 V alternating current (AC) input, facilitating installation.
- Unified network management and plug-and-play: free of field software commissioning, remote acceptance, remote upgrade and patch installation, and remote fault location.
SmartAX MA5621
|
| Dimensions (H×W×D)
|
44.4mm × 235mm × 180mm
|
| Network-side port
|
The MA5621 provides two uplink ports that use the SFP optical modules and automatically adapt to multiple modes, including GPON and GE. The two uplink ports can be configured as follows:
• 2 × GPON
• 2 × GE (optical)
• 1 × GE (optical) + 1 × GPON
|
| User-side port
|
Four GE/FE (auto-adaptive electrical) ports and four RS232 serial ports (configurable using software)
|
| Operating temperature
|
-40℃ to +70℃
|
| Humidity
|
5% to 95% (non-condensing)
|
| Heat dissipation mode
|
No fan, natural heat dissipation
|
| Electromagnetic compatibility (EMC) standards
|
• Complies with EN 55022 Class B
• Complies with GB 9254-1998 and GB/T 17618-1998
|
| Power supply
|
AC: auto-adaptive 220 V/110 V
DC: auto-adaptive 12 V/24 V/48 V
|
| Weight
|
1.5 kg
|
The MA5621 is installed in an outdoor cabinet for remotely collecting and transmitting required information in the electric system. It connects to two optical line terminals (OLTs) by using two PON ports for redundancy protection and connects to the remote terminal unit (RTU), transformer terminal unit (TTU), feeder terminal unit (FTU), or power meter by using the FE or serial port.
SmartAX MA5621
|
| GPON
|
Complies with ITU G.984 standards
|
| Supports 32 transmission containers (T-CONTs)
|
| Supports 1000 GPON encapsulation mode (GEM) ports
|
| Broadband
|
Supports 4K virtual local area networks (VLANs), supporting QinQ and stacking VLANs
|
| Supports 4K MAC addresses, supporting VMAC
|
| Supports the 802.1p protocol, priority queuing (PQ) and weighted round robin (WRR) flow control, and access control lists (ACLs)
|
| Leased line service
|
Supports transparent transmission of services complying with IEC60870-5-101, IEC60870-5-104, IEC61850 (substation automation), CDT, and DNP
|
| Security
|
Supports PPPoE + and Dynamic Host Configuration Protocol (DHCP) option82
|
| Supports static and dynamic MAC address binding
|
| Supports anti-MAC address and anti-IP address spoofing, and source MAC address and IP address filtering
|
| Supports anti-denial of service (DoS) attack and firewall
|
| Maintenance and management
|
Supports Simple Network Management Protocol version 1 (SNMPv1), SNMPv2, and SNMPv3
|
| Supports telnet and secure shell version 2 (SSHv2)
|
| Supports remote and batch pre-deployment
|
| Supports remote upgrade and monitoring
|
