Networking de empresas

UC&C

Computación en nube y centros de datos

Gestión y herramientas

Wireless

Industrias

Redes ágiles

Computación en nube y centros de datos

UC&C

Red privada inalámbrica

Casos de estudio

Soporte de productos

Descargas de software

Servicios de partner de canales

Soluciones de servicio

Soporte técnico

Capacitación de Huawei

Certificación de Huawei

Partners para las capacitaciones

Academia de red

Acceder a la capacitación como visitante

Cómo ser un partner

Pedido

Marketing

Material de soporte

Soporte

Evaluación

Noticias

Eventos

Página Anterior！

Prompt

No ha iniciado sesión o no esta autorizado！

Página Anterior

Serie UPS5000-A (30-800 kVA)

El UPS5000-A de Huawei es un UPS de conversión doble en línea que emite onda sinusoidal pura con tensión nominal de 380/400/415 VCA. El UPS5000-A ofrece una eficiencia de hasta 96 % y una alta densidad de alimentación de hasta 300 kVA por gabinete. Los controles completamente digitales permiten una salida precisa con cualquier condición de carga y entrada. Es adecuado para garantizar la alimentación continua de cargas críticas en centros de datos grandes y medianos.

UPS5000-E (30 -800 kVA)

  • UPS5000-E (30 -800 kVA)

Reliable

  • Wide input voltage range minimizing battery use: 485-305Vac for 100% load; 305-138Vac for 100%-40% load (derating linearly)
  • 5kA lightning protection design on input port to reduce lightning-related failure rate
  • Dual auxiliary power design, eliminating the single point of failure


Efficient

  • High efficiency of up to 96% for online mode, reducing power consumption effectively
  • High efficiency of up to 99% for ECO mode


Convenient

  • Rack/tower convertible for 30-120 kVA
  • High power density of up to 300kVA per cabinet, 50% footprint saving
  • High output power factor of up to 1, 25% more load driven


Intelligent

  • Flexible battery configuration: 30-40 batteries per string allow customers to get the faulty battery out instead of replacing it
  • Intelligent battery management extending battery life by 50%
  • Various communication interfaces including SNMP, dry contacts, RS485
  • NetEco network management system, supporting concentrated management to all the UPSs


Key Parameters for 30-120kVA

Rated Capacity 30kVA/30kW 40kVA/40kW 60kVA/60kW 80kVA/80kW 120kVA/120kW
Input
Input Wiring 3Ph+N+PE
Rated Voltage 380/400/415Vac
Input Voltage Range 138-485Vac
Rated Frequency 50/60Hz
Input Frequency Range 40-70Hz
Input Power Factor 0.99
THDi ≤3%
Bypass Voltage 380/400/415Vac
Bypass Frequency Range 50/60±6Hz
Battery Voltage 360-480 Vdc (the number of batteries can be selected from 30 to 40; 32 batteries in default）
Output
Output Wiring 3Ph+N+PE
Output Voltage 380/400/415Vac±1%
Output Frequency Tracking the bypass input(Online mode); 50/60Hz±0.25% (Battery mode)
THDv THDv＜1%
Output Power Factor 1
Overload Capacity Inverter: 110% overload for 60min; 125% overload for 10min; 150% overload for 1min
Environment
Operating Temperature 0-40℃
Storage Temperature -40-70℃
Relative Humidity 0%-95%(No condensing)
Operating Altitude 1000m. Above 1000m, derating according to IEC62040-3
Audible Noise ≤58dB ≤64dB
Others
Height×Width×Depth (mm) 500×264×800 1020×440×850
Weight 70kg 200kg 240kg
Certifications EN/IEC 62040-1; EN/IEC 62040-2; EN/IEC 62040-3; CE; CB; Rohs, Reach, WEEE, etc.
Communication Dry Contacts, RS485, SNMP

Key Parameters for 200-800kVA

Rated Capacity 200kVA
/200kW 		300kVA
/300kW 		400kVA
/380kW 		500kVA
/475kW 		600kVA
/570kW 		800kVA
/760kW
Input
Input Wiring 3Ph+N+PE
Rated Voltage 380/400/415 Vac
Voltage Range 138-485 Vac
Frequency Range 40-70 Hz
Total Harmonic Distortion ≤3%
Input Power Factor 0.99
Bypass Rated Voltage 380/400/415 Vac
Bypass Input Frequency 50/60±6 Hz
Battery Voltage 360-480 Vdc（the number of batteries can be selected from 30 to 40; 32 batteries in default）
Output
Output Wiring 3Ph+N+PE
Voltage 380/400/415 Vac±1%
Frequency Tracking the bypass input (Online Mode); 50/60 Hz±0.25% (Battery Mode)
Waveform Sine wave (THDv＜1% for linear load)
Output Power Factor 1 0.95
Efficiency 96%
Overload Capacity 110% overload for 60 min; 125% overload for 10 min; 150% overload for 1 min
Environment
Operating Temperature 0-40℃
Storage Temperature -40-70℃
Relative Humidity 0%-95% (No condensing)
Maximum Operating Altitude 1000 m. Above 1000 m, derating according to IEC62040-3
Audible Noise ＜65 dB ＜67 dB ＜70 dB ＜72 dB
Others
Dimensions (H×W×D) 2000 × 600 × 850 2000 × 1200 × 850 2000 × 2400 × 850
Weight 360 kg 550 kg 900 kg 1000 kg 1100 kg 1600 kg
Certifications EN/IEC 62040-1; EN/IEC 62040-2; EN/IEC 62040-3; CE; CB; Rohs, Reach, WEEE, etc.
Communications Dry contacts, RS485, SNMP

UPS

  • UPS5000-A series can provide 30-800kVA power supply; choose UPS model and number according to the load and UPS redundancy mode


Battery

  • Configuring battery according to the load and the battery running time


Optional Components

  • Parallel Cable
  • BSC Cable
  • Dry Contact Card

    • The dry contact card is installed in the optional card slot on the UPS and supports hot swap. The card provides six alarm dry contact outputs.


  • Battery Temperature Sensor
  • Ambient Temperature and Humidity Sensor

    • The ambient temperature and humidity sensor monitors the ambient temperature and humidity in the equipment room.


  • Battery detector

    • The battery detector monitors battery voltages and temperatures and battery string charge and discharge currents, and communicates with the PC over Modbus.


  • Battery grounding failure detector

    • The battery grounding failure detector detects battery grounding failures and sends alarm signals when the ground leakage current exceeds the specified value.