Sistema de suministro de energía montado en pared
El sistema de suministro de energía montado en pared es utilizado principalmente para suministrar energía a equipos con redes 2G/3G, de microondas y redes WLAN. Soporta entrada monofásica de 220 V o entrada de cable doble de 110 V. Características: diseño compacto, monitoreo inteligente, respaldo flexible de energía y expansión sin inconvenientes.
| Type | TP4860C | |||
|---|---|---|---|---|
| System specification | Dimension | 450mm(W, excluding 50mm protuberant part on the vent port) ×630mm(H)×300mm(D) | ||
| Weight | ≤32kg(without rectifier and battery) | |||
| Rated capacity | 30A/60A (compatible with 15A and 30A module) , 700WAC (with optional inverter) | |||
| Cooling mode | Direct ventilation | |||
| Maintenance mode | Front maintenance, supporting module-level replacement | |||
| Cabling mode | Cable outlet from the bottom of the cabinet | |||
| Installation mode | Wall-mounted/pole-mounted/land-stand | |||
| Protection level | IP55 | |||
| Battery (optional) | Built-in 40Ah Lithium battery or 20Ah/40Ah VRLA battery, 40Ah battery can be parallel connected through battery cabinet | |||
| Environmental specification | Operating temperature | -40℃~+45℃ | ||
| Operating humidity | 5%~95%(non-condensing) | |||
| Altitude | 0~4000m (at the altitude from 2000m to 4000m, the temperature declines by 1ºC for each increase of 200m in altitude) | |||
| AC distribution | AC input | Single phase (L,N,PE) or 110V dual line (L1,L2,PE) Only support single phase 220V, 50Hz when AC configured | ||
| inverter output (optional) | 1000VA/700W, 3×10A/1P MCB | |||
| AC input voltage | 85~300VAC, rated: 220VAC | |||
| AC input frequency | 45~66Hz, rated: 50Hz/60Hz | |||
| AC SPD | 20/40kA (8/20µs) | |||
| DC SPD | Differential mode: 10kA, 8/20µs, Common mode: 20kA, 8/20µs | |||
| Signal port SPD | Differential mode: 3kA, 8/20µs, Common mode: 5kA, 8/20µs | |||
| DC distribution | Output voltage | -42~-58VDC, default value: -53.5VDC | ||
| Maximum output power | 4800W | |||
| Battery branch | 1×63A/1P (MCB) | |||
| BLVD | 3×16A/1P (MCB) | |||
| Rectifier module | Efficiency | ＞96% | ||
| Input voltage | 85~300VAC, rated: 220VAC | |||
| Monitoring unit | Sensors interface | Gate, water, smoke, battery temperature, environmental temperature & humidity | ||
| Digital input | 4 branches | |||
| Alarm output | 4 branches | |||
| Communication port | RS485/RS232 | |||
| Battery (optional) | Rated capacity | 20Ah VRLA battery | 40Ah VRLA battery | 40Ah Li-battery |
| Weight | 6.35kg×4 | 14.6Kg×4 | 25kg | |
| Nominal voltage | 12V | 12V | 48V | |
Wall-mounted power includes power cabinet and rectifiers, inverter, VRLA battery, lithium battery, heater box and sensors..
Power cabinet: includes AC distribution, DC distribution and monitoring unit.
Rectifier: rectifier’s type and data are based on load power and battery’s most charge function to make sure.
Inverter: it is needed when AC input is required. It can offer 1000VA (700W).
Sensor: battery temperature & humidity sensor is optional,.
VRLA battery: according to load and backup time to choose battery, there are 20AH and 40AH to be chosen.
Lithium battery: 40AH to be chosen.
Heater: it is configured when the temperature of environment is below -10℃.
Copyright © Huawei Technologies Co., Ltd. 1998-2015. All rights reserved.
Términos & Condiciones|Política de Privacidad|Mapa del sitio|Contacto Local TAC
