Página Anterior!

Prompt

No ha iniciado sesión o no esta autorizado!

Página Anterior

Serie UPS5000-E (40 kVA-320 kVA)

El UPS5000-E utiliza la redundancia modular y la doble conversión en línea. Ofrece alta eficacia y densidad de alimentación. El UPS ofrece soluciones confiables, económicas, inteligentes y fáciles de usar. Puede suministrar energía de alta calidad a centros de datos, salas de servidores, sistemas de seguridad y cargas clave (como equipos de fabricación automáticos) medianos y grandes. El UPS5000-E ofrece protección de energía de 40 kVA/kW, 80 kVA/kW, 120 kVA/kW, 160 kVA/kW o 200 kVA/kW, lo que elimina el impacto de las fallas eléctricas en los equipos del cliente.

UPS5000-E (40 -320 kVA)

  • UPS5000-E (40 -320 kVA)

Reliable

  • Wide input voltage and frequency range: 138-485Vac, 40-70Hz
  • 5kA lighting protection design on input port to reduce lightning-related failure rate
  • Redundant design and hot-swappable controllers, which improve the reliability of the whole system


Efficient

  • High efficiency at low load rate: 95%@20% load; 96%@40% load
  • Intelligent hibernation technology to improve operation efficiency and reduce the UPS power loss efficiently


Convenient

  • Hot swappable power modules, control modules, and bypass modules make module replacement time close to 0, which facilitates capacity expansion and maintenance
  • High power density of up to 40kVA/3U, and only 0.5 square meters taken up
  • High output power factor of up to 1 and 25% more load driven
  • The 7-inch colored LCD in standard configurations


Intelligent

  • Intelligent battery management to extend battery service time by 50%
  • Built-in SNMP card and HUAWEI Neteco 1000 software, easy to manage remotely


Model UPS5000-E-120K-F120 UPS5000-E-200K-F200 UPS5000-E-320K-F320
Rated Capacity
(kVA / kW)
40/80/120 40/80/120/160/200 40/80/120/160/200/240/280/320
The Number of Power Modules 1/2/3 1/2/3/4/5 1/2/3/4/5/6/7/8
Height×Width×Depth 2000 mm × 600 mm × 850 mm
Weight 227-293 kg 227-359kg 227-480kg
Input
Input Wiring 3Ph+N+PE
Rated Voltage 380/400/415 V AC
Input Voltage Range 138-485 V AC; 305-485 V AC for 100% load; 305V-138 V AC for 100%-40% load (derating linearly)
Input Frequency Range 40-70 Hz
THDi (Total Harmonic Distortion of Input Current) THDi<3% (for linear load); THDi<5% (for nonlinear load)
Input Power Factor 0.99
Bypass Voltage 380/400/415 V AC
Bypass Input Wiring 3Ph+N+PE
Bypass Frequency Range 50/60±6 Hz
Battery Voltage 360-480 Vdc
Output
Output Wiring 3Ph+N+PE
Output Voltage 380/400/415 V AC±1%
Output Frequency Tracking the bypass input (online mode); 50/60 Hz±0.1% (battery mode)
Waveform Sine wave; THDv<1% for 100% linear load and THDv<3% for 100% nonlinear load
Output Power Factor 1
System Efficiency 96%
Overload Capacity Inverter: 110% overload for 60 minutes; 125% overload for 10 minutes; 150% overload for 1 minutes
Bypass: 135% overload for long term; >1000% overload for 100 ms
Environment
Operating Temperature 0-40℃
Storage Temperature -40-+70℃
Relative Humidity 0%-95% (non-condensing)
Operating Altitude 1000 m; above 1000 m, derating 1% for each additional 100 m
Audible Noise <65dB <68dB
Others
Certifications EN/IEC 62040-1; EN/IEC 62040-2; EN/IEC 62040-3; CE; CB; RoHS, REACH, WEEE, etc.
Communication Interfaces Dry Contacts, RS485, SNMP

Item Detail
Communication card -- Dry contact extended card
-- Backfeed protection card
Power distribution -- Input power distribution cabinet
-- Output power distribution cabinet
-- Battery switch box
-- Battery circuit breaker (BCB) box
Battery Management kit -- Battery monitoring unit
-- Battery ground fault detector
Environment -- Ambient temperature and humidity sensor
-- Battery temperature sensor
Mechanical kit -- Top outlet kit (for UPS5000-E-120K-F120 and UPS5000-E-120K-F200)
-- Top entry cabinet (for UPS5000-E-320K-F320)
-- IP21 component
-- Antiseismic kit