Networking de empresas

UC&C

Computación en nube y centros de datos

Gestión y herramientas

Wireless

Industrias

Redes ágiles

Computación en nube y centros de datos

UC&C

Red privada inalámbrica

Casos de estudio

Soporte de productos

Descargas de software

Servicios de partner de canales

Soluciones de servicio

Soporte técnico

Capacitación de Huawei

Certificación de Huawei

Partners para las capacitaciones

Academia de red

Acceder a la capacitación como visitante

Cómo ser un partner

Pedido

Marketing

Material de soporte

Soporte

Evaluación

Noticias

Eventos

Página Anterior！

Prompt

No ha iniciado sesión o no esta autorizado！

Página Anterior

OptiX OSN 550

El OptiX OSN 550 es un equipo de transmisión óptica de próxima generación que se utiliza en la capa de acceso de la red de transmisión. Es compatible con la tecnología de Conmutación de Etiquetas Multiprotocolo (MPLS) y una variedad de topologías de red de servicios en los dominios de Multiplexación por División de Tiempo (TDM) y dominios de paquetes.

OptiX-OSN-550

  • OptiX-OSN-550

Small Box with Powerful Function

  • Smart transport based on universal switch for all types of services, including Ethernet, ATM, TDM, and future services.
  • BIDI and built-in WDM functions overcome fiber resource restrictions.
  • 2U height, flexible and powerful networking with STM-16/10GE interfaces.


Easy Maintenance, Excellent Environmental Adaptability

  • Installation at anywhere, wall-mounted, desktop, 19’’ cabinet, 300/600 mm ETSI cabinet, outdoor cabinet
  • Flexible power supply, DC (-48V/-60V)/AC (110V/220V) solution, 10 hours power supply with UPM when the mains supply is interrupted.
  • Work temperature up to 65℃, can be deployed outdoors, in the desert, and in other harsh environments.


Energy Saving, Environmental Protection

  • Intelligent power consumption control, idle path power down, intelligent fan speed adjusting.
  • Lowest power consumption in the industry, 30% below average.
  • Comply with RoHS/WEEE directive, adopting a variety of technologies to reduce equipment energy, designed according to the environmental protection requirements.


TP-Assist for Easy OAM

  • MPLS-TP based OAM solution “TP-Assist” provides efficient planning, fast deployment and easy maintenance, making the large-scale packet network easily manageable
  • Traffic based crystal clear OAM is supported with visual network-level view, graphical format to display end-to-end service configuration, performance and status.
  • Better maintenance experience even than SDH: visualized end-to-end bandwidth management, intelligent location of 92% failures, analyzable and predicable network management.


Industry Certification

  • Pass EN 50121-4 Railway EMC certification.

OptiX OSN 550 Product Specifications

System Features  
Subrack dimensions 88 mm (H) x 442 mm (W) x 220 mm (D)
Switching capacity Packet: 60 Gbit/s and TDM: 20 Gbit/s (higher order), 5 Gbit/s (lower order)
Service slots 6 service interface slots
Highly reliable design 1+1 hot backup for power supply modules
1+1 hot backup for the system control boards
1+1 hot backup for the cross-connect and synchronous timing boards
Supported interfaces Packet transport interfaces E1, ch STM-1, ATM STM-1, FE/GE/10GE
MSTP interfaces STM-1/4/16, E1/E3/T1/T3, FE/GE
WDM interfaces 40-channel DWDM interfaces, compliant with ITU-T G.694.1
8-channel CWDM interfaces, compliant with ITU-T G.694.2
Networking Mode Supports pure packet，hybrid (packet + SDH) or SDH networking
Supports WDM networking
Supports single-fiber bidirectional transmission
Power Supply -38.4~-72V DC; 110/220V AC
Installation ETSI rack with 300mm/600mm depth
19-inch rack
Wall-mount
Desktop
Out-door cabinet
Weight Net weight of the subrack (no board or fan): 2.78 kg
Typical configuration: 5.8kg
Operation Environment Temperature Relative Humidity
Long term: -5°C ~ 55°C 10% ~ 90%
Short term: -5°C ~ 65°C 5% ~ 95%
Packet Transport Features  
Service features E-Line and E-LAN
QinQ
MPLS-TP based VPWS and VPLS
Multi-section pseudo-wire (MS-PW)
TDM PWE3: CESoPSN and SAToP, compression of idle timeslots
ATM/IMA PWE3
ETH PWE3
IGMP SNOOPING V2
Blacklist, Broadcast packet suppression, ACL
VLAN SWAP
QoS features DiffServ mode based on traffic classification
Simple traffic classification, complex traffic classification, per hop behavior (PHB), and ACL
Committed access rate (CAR)
PQ scheduling priority, weighted round robin (WRR) and PQ+WRR queuing
Tail drop and weighted random early detection (WRED)
Eight priority queues
Shaping based on port scheduling priority
Hardware-based OAM MPLS OAM LSP/PW OAM:
FDI, BDI
CV, FFD, TraceRoute, Ping
CES PW VCCV
MPLS-TP OAM LSP/PW OAM:
CC、LB、LT
AIS、RDI
LM、DM
LCK、TST
CSF 		Section OAM:
CC、LB
RDI
LM、DM
LCK、TST
Ethernet OAM ETH-CC(Continuity Check)、ETH-Loopback、ETH-Link Trace
Remote Loopback、Remote Fault Detection
ATM OAM
RMON(RFC 2819)
Flexible design with multiple protocols
Carrier-class protection LSP/PW Linear protection
MPLS-TP Ring protection
ERPS(G.8032)
Anti multifailure protection based on MS-PW
Link aggregation group (LAG) protection
LPT
STP/RSTP/MSTP
IMA protection
1+1 and 1:1 Linear MSP
Clock synchronization Two external clock inputs/outputs (2 MHz or 2 Mbit/s)
Two external time signals（1pps+TOD）
Adaptive clock recovery (ACR)
Synchronous Ethernet
IEEE 1588v2
MSTP Features
Carrier-class protection SDH Network Protection
2-fiber MS-SP Ring; 1+1, 1:n (n<=14) Linear MSP; SNCP; Fiber shared virtual path protection; DNI (ITU-T G.842)
Ethernet Service Protection
RSTP, LAG, LPT
Clock synchronization Two external clock inputs/outputs (2 MHz or 2 Mbit/s)
Line clock source
Tributary clock source