Suministro de energía en exterior
Los productos de alimentación de la serie TP48200A convierten corriente de entrada de CA en corriente de salida de -48 VCC. Son ampliamente utilizados en entornos de exterior de DBS, BTS, y DBS más BTS. Los productos se centran en funciones como seguridad, eficiencia energética, confiabilidad, integración flexible, y brindan soluciones de energía confiables a los sitios de exterior.
| Type | TP48200A-H15A3 | TP48200A-H15A5 | TP48200A-D15A1 | ||
|---|---|---|---|---|---|
| System specification | Dimension | 1500mm(H)*650mm(W)*650mm(D)(excluding base) | |||
| Weight | ＜120Kg (excluding rectifier and battery) | ||||
| Rated capacity | 200A | ||||
| Cooling mode | Heat exchanger for equipment cabin, direct ventilation for battery cabin | Direct ventilation | |||
| Maintenance | In front, supporting modular replacement | ||||
| Cabling mode | Cable outlet from the bottom of the cabinet | ||||
| Protection level | Equipment cabin: IP55, Battery cabin: IP45 | IP55 | |||
| Environment specification | Operating temperature | -10~+45ºC | -40~+45ºC | -10~+45ºC | |
| Operating humidity | 5%~95%(non-condensing) | ||||
| Altitude | 0~4000m (at the altitude from 2000m to 4000m, the temperature declines by 1ºC for each increase of 200m in altitude) | ||||
| AC distribution | Input mode | Single phase/ Three phase | |||
| Input voltage | 85~300VAC, rated: 220VAC | ||||
| Input frequency | 45~65Hz, rated: 50Hz/60Hz | ||||
| Input distribution | 1×63A/3P MCB | ||||
| Output distribution | 2 ×16A MCB | ||||
| SPD for AC input | Class C surge protection Standard surge discharge current: 20kA, 8/20µs Maximum surge discharge current: 40kA, 8/20µs | ||||
| DC distribution | Output voltage | 42~58VDC, default value: 53.5VDC | |||
| SPD for DC output | Differential mode: 10kA, 8/20µs; Common mode: 20kA, 8/20µs | ||||
| Output power | 11600W(normal efficiency) /12000W(high efficiency) | ||||
| Battery branch | 2x125A MCB | ||||
| BLVD | 2×16A MCB | ||||
| LLVD | 2× 63A, 2×32A MCB | ||||
| Rectifier module | Efficiency | ＞96% | |||
| Input voltage | 85~300VAC, rated: 220VAC | ||||
| Monitoring unit | Communication | RS485/232, FE | |||
| Sensor | battery temperature, door, environment temperature, environment humidity , smoke, water, 6 battery voltage check points | ||||
| Dry contact | Eight maximum, alarm signal information can be defined | ||||
| Digital signal detection | Eight, one for AC SPD monitor, one for DC SPD monitor, six spared | ||||
| Type | TP48200E-H09A1 | TP48200E-D09A1 | TBC300A-DCA1 | TBC300A-TCA1 | |
|---|---|---|---|---|---|
| System specification | Dimension | 900mm(H)*650mm(W)*650mm(D)(excluding base) | |||
| Weight | ＜70Kg (excluding rectifier, battery) | ||||
| Rated capacity | 200A | 2 group 150AH batteries | |||
| Cooling mode | Heat exchanger | Direct ventilation | Direct ventilation | TEC | |
| Maintenance | In front, supporting modular replacement | ||||
| Cabling mode | Cable outlet from the bottom of the cabinet | ||||
| Installation mode | Installed on 19-inch rack | N/A | |||
| Protection level | IP55 | IP34 | IP55 | ||
| Environment specification | Operating temperature | -40~+45ºC | -10~+45ºC | ||
| Operating humidity | 5%~95%(non-condensing) | ||||
| Altitude | 0~4000m (at the altitude from 2000m to 4000m, the temperature declines by 1ºC for each increase of 200m in altitude) | ||||
| AC distribution | Input mode | Single phase/ Three phase | -48V | ||
| Input voltage | 85~300VAC, rated: 220VAC | N/A | |||
| Input frequency | 45~65Hz, rated: 50Hz/60Hz | N/A | |||
| Input distribution | 1×63A/3P MCB | N/A | |||
| Output distribution | 2 ×16A MCB | N/A | |||
| SPD for AC input | Class C surge protection Standard surge discharge current: 20kA, 8/20µs Maximum surge discharge current: 40kA, 8/20µs | N/A | |||
| DC distribution | Output voltage | 42~58VDC, default value: 53.5VDC | N/A | ||
| SPD for DC output | Differential mode: 10kA, 8/20µs; Common mode: 20kA, 8/20µs | N/A | |||
| Output power | 11600W(normal efficiency) /12000W(high efficiency) | N/A | |||
| Battery branch | 2x125A MCB | N/A | |||
| BLVD | 16A×2, 10A×1 MCB | N/A | |||
| LLVD | 63A×2, 32A×2 MCB | N/A | |||
| Rectifier module | Efficiency | ＞96% | N/A | ||
| Input voltage | 85~300VAC, rated: 220VAC | N/A | |||
| Monitoring unit | Communication | RS485/RS232, FE | RS485 | ||
| Sensor | battery temperature, door, environment temperature, environment humidity , smoke, water sensor, 6 battery voltage check points | smoke , water | |||
| Dry contact | Eight maximum, alarm signal information can be defined | inside temperature, fan alarm, door open alarm | |||
| Digital signal detection | Eight, one for AC SPD monitor, one for DC SPD monitor, six spared | N/A | |||
Outdoor power : including cabinet, rectifier, battery, sensor
Cabinet: northern or southern type selected by climate
Rectifier: the number is confirmed by load power， battery power and rectifier type
Sensor: door sensor, battery temperature sensor are must be configured, smoke, water, environment temperature & humidity sensor are optional.
Battery: the number is determined by load power and backup time.
Notes: Battery capacity, rectifier number and temperature control type and application environment determine the cabinet type.
Copyright © Huawei Technologies Co., Ltd. 1998-2017. All rights reserved.
Términos & Condiciones|Política de Privacidad|Mapa del sitio|Contacto Local TAC
