Página Anterior!

Prompt

No ha iniciado sesión o no esta autorizado!

Página Anterior

SmartAX MA5612

El SmartAX MA5612 (MA5612 de forma abreviada) es una unidad remota multiusuario (MDU) líder en la industria lanzada por Huawei, compatible con configuraciones flexibles. Ofrece servicios de banda ancha en redes de fibra hasta el edificio (FTTB) y servicios en líneas arrendadas en una Red Óptica Pasiva (PON). El MA5612 es un dispositivo tipo caja que mide 1 U de altura y 19 pulgadas de ancho. Cuenta con dos puertos uplink GPON o GE, entre 8 y 24 canales de acceso LAN (LAN:POTS = 1:N) y entre 8 y 16 canales de acceso E1. El MA5612 cuenta con un amplio rango de temperaturas, bajo consumo de energía, es silencioso, tiene gran estabilidad, es ecológico y preserva la energía. Puede usarse en mesas de trabajo e instalarse en pasillos y gabinetes. De este modo, cumple con los requerimientos de servicios de banda ancha y de líneas arrendadas de los clientes.

SmartAX MA5612

  • SmartAX MA5612
  • Automatic adaptation to GPON and GE modes: The MA5612 provides two uplink ports using the small form-factor pluggable (SFP) optical modules to meet different site requirements.
  • Flexible board configurations.
  • Support for multiple clock synchronization technologies, such as synchronous Ethernet, E1 line clocks and GPON line clocks.
  • Operable IPTV services: Strong service switching capability, packet forwarding capability, and high integration (data exchange and user management) enable the MA5612 to have carrier-class multicast operation capability.
  • Perfect voice features, supporting basic services (voice service, fax service, and modem service) and supplementary services (three-way calling, call waiting, call transfer, calling line identification presentation, and calling number restriction).
  • Plug-and-play (PnP) service provisioning: The MA5612 allows remote issuing of configuration. A management channel and service channel are created after the MA5612 is powered on and registers successfully. Manual onsite configuration is not required.
  • Efficient management and maintenance: free of field software commissioning, remote acceptance, remote upgrade and patch installation, and remote fault location.
  • High reliability: The MA5612 supports the working temperature from -40℃ to 65℃, 6 kV lightning protection, and corrosion-proof design of boards.
  • Prudent security measures: The MA5612 meets security requirements of telecom services to ensure system and user security.
  • Environment-friendly and energy conservation: The MA5612 uses a highly effective power supply system to reduce system power consumption. It uses an intelligent fan system that adjusts the rotating speed to reduce power consumption when the system is idle. It uses high-performance chipset to reduce chipset power consumption. It uses POTS short-loop design to reduce port power consumption in short distances.
  • 12 V backup power supply: The size and price of the battery are one-fourth of those of 48 V backup power supply.

SmartAX MA5612

Dimensions (H×W×D)

43.6mm × 442mm × 245mm

Network-side port The MA5612 provides two uplink ports that use the SFP optical modules and automatically adaptto multiple modes, including GPON and GE. The two uplink ports can be configured as follows:
• 2 × GPON
• 2 × GE (optical)
• 1 × GE (optical) + 1 × GPON
User-side port The MA5612 supports fixed configurations and provides two slots. The fixed configurations are as follows:
• 2 GE (electrical) + 6 FE (electrical)
• 2 GE (electrical) + 6 FE (electrical) + 16 POTS
• 2 GE (electrical) + 6 FE (electrical) + 16 POTS + 1 RF
The two slots can house the following boards:
• Board providing 8 FE ports
• POTS board providing 16 ports
• Board providing 8 E1 ports
Operating temperature -40℃ to 65℃; startup at -25℃
Humidity 5% to 95% (non-condensing)
Heat dissipation mode Providing fans for heat dissipation; the fans can adjust rotating speed intelligently
Lightning protection capability GE/FE: 6 kV
POTS: 4 kV
Power supply AC: 220 V/110 V
DC: -48 V
Backup power 12 V battery
Weight 3.7 kg (empty chassis)
4.22 kg (full configuration)

Family broadband service scenario

In the upstream direction, the MA5612 connects to the optical line terminal (OLT) through the gigabit passive optical network (GPON). In the downstream direction, the MA5612 connects to a PC by using the category-5 cable to provide high-bandwidth broadband, voice, and video services and connects to a telephone by using twisted pairs to provide plain old telephone service (POTS) services.


Enterprise leased line scenario

For a traditional private branch exchange (PBX) and router, the MA5612 provides a TDM E1 port to transmit leased line services to the OLT by using the native TDM technology. The MA5612 also provides a primary rate interface (PRI) that converts E1 frames transmitted by the PBX to Session Initiation Protocol (SIP) or H.248 packets and transmits them to the OLT. For an IP PBX and router, the MA5612 provides an FE or GE port to transmit leased line services to the OLT by using the virtual local area network (VLAN) transparent transmission technology.


SmartAX MA5612

GPON

ITU G.984 - compliance

32 T-CONTs
1000 GEM ports
Broadband 4096 VLANs, supporting QinQ and stacking VLANs
4096 MAC addresses, supporting VMAC
802.1p, supporting PQ and WRR flow control, and ACL
Voice SIP and H.248
2 PRIs
POTS short-loop design
Leased line service Native TDM
Clock source recovery of the E1 port
Loopback, blocking and unblocking of the E1 port
Multicast IGMPv2 and IGMPv3
IGMP proxy and IGMP snooping
A maximum of 1024 configurable multicast programs in the system
A maximum of 48 multicast users
A maximum of 16 concurrent multicast programs for each user
Security PPPoE + and DHCP option82
Static and dynamic MAC address binding
Anti-MAC and anti-IP spoofing; source MAC address and IP address filtering
Anti-DoS attack and firewall
Maintenance and management SNMPv1, SNMPv2, and SNMPv3
Telnet and SSHv2
Remote and batch pre-deployment
Remote upgrade and monitoring