Networking de empresas

UC&C

Computación en nube y centros de datos

Gestión y herramientas

Wireless

Industrias

Redes ágiles

Computación en nube y centros de datos

UC&C

Red privada inalámbrica

Casos de estudio

Soporte de productos

Descargas de software

Servicios de partner de canales

Soluciones de servicio

Soporte técnico

Capacitación de Huawei

Certificación de Huawei

Partners para las capacitaciones

Academia de red

Acceder a la capacitación como visitante

Cómo ser un partner

Pedido

Marketing

Material de soporte

Soporte

Evaluación

Noticias

Eventos

Página Anterior！

Prompt

No ha iniciado sesión o no esta autorizado！

Página Anterior

SmartAX MA5669

La serie SmartAX MA5669 es una unidad multiusuario remota (MDU) lanzada por Huawei y líder en la industria. Ofrece servicios de banda ancha a la red FTTB (fibra hasta el edificio) y la función POE en una Red Óptica Pasiva (PON). El MA5669 es un dispositivo integrado tipo caja. Proporciona un puerto uplink GPON o GE, 2 canales de acceso GE (POE integrado) del lado del usuario. El MA5669 dispone de un amplio rango de temperaturas, bajo consumo de energía, es silencioso y tiene gran estabilidad. Puede usarse en escenarios backhaul de WLAN y puede ser instalado en paredes, polos y cables. Así, cumple con la implementación de banda ancha y el backhaul de AP.

SmartAX MA5669

  • SmartAX MA5669

MA5669 support POE function, which suit for WLAN backhaul and video monitoring scenario, MA5669 connects to the optical line terminal (OLT) through the GPON interface. In the downstream direction MA5669 connects to AP or camera by using the category-5 cable and POE power cascaded on the cable to provide high-bandwidth broadband.


  • Automatic adaptation to GPON and GE modes: The MA5669 provides one uplink port using the small form-factor pluggable (SFP) optical modules to meet different site requirements.
  • Plug-and-play (PnP) service provisioning: The MA5669 allows remote issuing of configuration. A management channel and service channel are created after theMA5669 is powered on and registers successfully. Manual onsite configuration is not required.
  • High reliability: The MA5669 supports the working temperature from –40℃ to 55℃, 6kV lightning protection.
  • Suit for WiFi and video monitoring scenario: support POE function, lower investment and fast service deployment.
  • Support IEEE 802.3af (15.4W) and IEEE802.3at (30W) protocol for each port.
  • Integrated device, easy installation, support wall-mounting, Cable installation, Pole installation.

MA5669
GPON ITU G.984-compliance
32 T-CONTs
1000 GEM ports
Broadband 4096 VLANs, supporting QinQ and stacking VLANs
4096 MAC addresses, supporting VMAC
802.1p, supporting PQ and WRR flow control, and ACL
Multicast IGMPv2 and IGMPv3
IGMP proxy and IGMP snooping
A maximum of 1024 configurable multicast programs in the system
A maximum of 48 multicast users
A maximum of 16 concurrent multicast programs for each user
Security PPPoE+ and DHCP option82
Static and dynamic MAC address binding
Anti-MAC and anti-IP spoofing; source MAC address and IP address filtering
Anti-DoS attack and firewall
Maintenance and management Supports SNMPv1, SNMPv2, and SNMPv3
Supports Telnet and SSHv2
Remote and batch pre-deployment
Remote upgrade and monitoring

MA5669
Dimensions (H×W×D) 307.8×222.5×148.1mm (W*D*H）
Network-side port The MA5669 provides one uplink port that uses the SFP optical modules and automatically adapt to multiple modes, including GPON and GE. The uplink ports can be configured as follows:
1*GPON
1*GE (optical)
User-side port • 2*GE (electrical) +2*POE
• 2*GE (electrical)
Operating temperature –40℃ to +55℃; startup at –25℃
Humidity 5% to 95% (non-condensing)
Heat dissipation mode Passive cooling without fan
Lighting proof 6kV
Power supply AC: 220 V/110 V
Weight 3.7 kg