Networking de empresas

UC&C

Computación en nube y centros de datos

Gestión y herramientas

Wireless

Industrias

Redes ágiles

Computación en nube y centros de datos

UC&C

Red privada inalámbrica

Casos de estudio

Soporte de productos

Descargas de software

Servicios de partner de canales

Soluciones de servicio

Soporte técnico

Capacitación de Huawei

Certificación de Huawei

Partners para las capacitaciones

Academia de red

Acceder a la capacitación como visitante

Cómo ser un partner

Pedido

Marketing

Material de soporte

Soporte

Evaluación

Noticias

Eventos

Página Anterior！

Prompt

No ha iniciado sesión o no esta autorizado！

Página Anterior

UPS8000-D-200K

El UPS8000-D-200K es un UPS de onda sinusoidal de doble conversión en línea de alto rendimiento. Está diseñado para salas de computación de mediano y gran tamaño (por ejemplo, salas de computación de red en el sector financiero, de las telecomunicaciones, de seguros, en el sector ferroviario, médico y minero, empresas e instituciones públicas), equipos industriales de mediano y gran tamaño (por ejemplo, instrumentos de medición y equipos de automatización industrial), instrumentos de precisión, sistemas de emergencia, y sistemas de iluminación.

UPS8000-D-200K

  • UPS8000-D-200K

Reliable

  • Built-in output isolation transformer provides good electrical isolation, and ensures high adaptability to impulse load and stable output even in the most severe load disturbance
  • Wide input voltage range (240-480 Vac) enables UPS8000-D to be applicable for the worst electrical conditions
  • Backfeed protection technology ensures the safety of the system
  • Robust inverter ensures high overload capacity: 110% overload for 60min, 125% overload for 10min, 150% overload for 1min


Efficient

  • The efficiency at online mode is higher than 94%, and for 25% load efficiency is up to 93%, as a result, UPS8000-D can save more energy than traditional UPSs in redundant configuration with low load rate
  • Intelligent hibernation technology minimizes the system power loss and helps the system operation at high efficiency at low load rate
  • Power walk-in technology boosts the proportion of UPS capacity to D.G. capacity to 1:1.1 and reduces CAPEX for customers
  • Low THDi of less than 3% minimizes the harmonic effect on the power grid


Covenient

  • Maximally, 8 UPSs can be paralleled together to satisfy different power demand
  • Cascade technology enables two independent N+X parallel systems to be connected together in emergency.
  • Module design of power unit and front maintenance design make maintenance more simple


Intelligent

  • UPS8000-D supports various types of battery and provides four different control modes according to the battery type
  • LED and graphic LCD display facilitates operation and maintenance
  • Intelligent charging and discharging management, temperature compensation, and battery intelligent hibernation technology extend the battery life by 50%

Model UPS8000-D-200K
Rated Capacity 200 kVA/180 kW
Input
Mains input rated Voltage 380/400/415 Vac
Input Voltage Range 240 Vac-480 Vac， 65% load at 240 Vac
Mains input Wiring 3Ph
Input Frequency Range 45-65 Hz
Total Harmonic Distortion THDi<3%
Input Power Factor 0.99
Bypass Rated Voltage 380/400/415 Vac
Bypass input Wiring 3Ph+N
Bypass Input Frequency Range 50/60 Hz ±2% (±1%-±6% adjustable)
Battery Voltage 480 V
Output
Output Wiring 3Ph+N
Rated Voltage 380/400/415 Vac±1%
Output Frequency Be synchronized to the bypass input (Online Mode), 50/60 Hz±0.05% (Battery Mode)
Waveform Sine wave, THDv<2%(linear load), THDv<3%(100% non-linear load)
Output Power Factor 0.9
Output Imbalance Voltage imbalance:±1%; Phase imbalance:±1°
Efficiency Up to 94%
Switch time 0 ms
Overload Capacity 110% overload for 60 min, 125% overload for 10 min and 150% overload for 1 min
Environment
Operation Temperature 0 ℃-40 ℃
Storage Temperature -25 ℃-70 ℃
Relative Humidity 0%-95% RH(non-condensing)
Operation Altitude ≤1000 m, above 1000 meters, derating of 1% for each 100 meters. The maximum altitude is 4000 meters.
Audible Noise <68dB
Others
Dimensions (H×W×D) 1900 mm×1000 mm×850 mm
Weight 1000 kg
Communication Interfaces Dry contact, RS232, SNMP, Modbus
Certificate TLC, CE

UPS

  • UPS8000-D-200K: 200 KVA / 180 KW; three-phase input and three-phase output
  • Choose UPS model and number according to the loads and UPS redundancy mode

Battery

  • Configure battery according to the load and the backup time.

Optional Components

Communication Card


  • Dry Contact: monitors the UPS over input and output signals
  • SNMP: monitors the UPS over the network
  • Modbus: monitors the UPS over the network

    • Component for parallel system


  • Parallel Kit: used for parallel
  • UGS: enables two single systems to be a dual-bus system
  • PSJ: enables two systems to be a whole system in emergency

    • Others


  • Cold Start Component: cold start components allow a UPS to start from the battery when there is no mains input
  • Battery Switch Box: recommend configuring battery switch box for each battery string, which can disconnect the battery from UPS when faults occur or UPS need repair
  • Battery Temperature Sensor: monitors the Temperatures of the batteries
  • Top Cable Entry Cabinet: enables cable routing from the top of the UPS8000-D