Performance

One or two quad-core / hexad-core Intel®5600®Xeon processors, The processors are connected to the Tylersberg bridge chip through two full-bandwidth Quick Path bus interfaces
One to four 3.5-inch SAS or SATA hard disks, support hot plugging , advanced LSI RAID card technology
Fan speed and the CPU frequency, and features energy saving and power consumption reduction, supports real-time monitoring of the system power consumption
A BMC integrated on the RH1285, providing an independent IPMI 2.0 management network interface，Support of remote KVM over IP,SOL, and virtual media；Support of Firmware upgrade
Customization support

Processor

The RH1285 uses up to two Intel Nehalem-EP 5600 series quad-core or hexad-core processors. A single CPU provides the maximum main frequency of 2.93 GHz and the L2 cache of 12 MB

Chipset

Intel Tylersburg IOH + ICH10R

Memory

12 * DDR3 800/1066/1333 RDIMM / UDIMM sockets；Provide maximum memory of 192GB

Storage

The RH1285 supports at most four 3.5-inch SAS/SATA2 hard disks，RH1285 can support the SAS hard disk with the maximum capacity of 4TB and the SATA hard disk with the maximum capacity of 8TB
Hot swappable hard disk support
The LSI 1068E SAS sub-card can be used to support RAID 0/1/1E
The LSI 1078 SAS RAID sub-card with the cache of 512 MB can be used to support RAID 0/1/5/6/50/60
The LSI 1078 SAS RAID sub-card can be configured with the battery backup unit for power failure protection

Network interface

Interfaces of front panel
2xUSB 2.0 interfaces, one power button
Interfaces of rear panel
2xUSB 2.0 interfaces, one DB15 VGA interface, one DB9 serial port, one 10/100 M network
port for management , two GE network ports for application (RJ45)
The GE network port supports WOL and PXE startup

Management system

The embedded BMC module supports the IPMI 2.0 specification, which can provide management functions including remote power-on or power-off, reset, log recording, and hardware monitoring.
SOL support
One 10/100M Base-T management interface is provided on the rear panel
The management interface based on Web is provided. No other management software is required
The remote and local management operations can be performed through the IPMITOOL
Remote KVM (KVM over IP) is supported. This design can be implemented in the later version.
The system supports virtual media to provide remote virtual CD-ROM and floppy services. This design can be implemented in the later version.
The system supports the remote Firmware upgrade

Dimensions

Height: 43.5 mm (1U space)
Width: 448 mm
Depth: 700 mm

Power supply

The system uses the 450 W 110V/220V power module

OS & Virtual system

Microsoft Windows Server 2003 and 2008
Red Hat Enterprise Linux
SUSE Linux Enterprise Server
Vmware
Citrix Xen Server
Oracle linux
Oracle VM.

IO

One x8 PCI Express with half-length/full-height