AP7030DE Access Point - Huawei Products
Under Construction!

Prompt

You have not logged in. Want to enter the login page?

Yes No

Prompt

Sorry that you are not authorized to download this document.

Apply Previous

Register an account

  • *
  • *
  • *
  • *
  • *
  • I agree that Huawei representatives may contact me.
  • I agree to receive information on Huawei products by email.
  • Terms of UsePrivacy Policy

If you already have a Huawei account, please login to download

AP7030DE Access Point

The AP7030DE is an industry-leading dual-band access point (AP). In compliance with IEEE 802.11ac standards, it provides gigabit access for wireless users. It is beautifully designed and applicable to high-density scenarios, including the halls, exhibition centers, stadiums, and large venues.
• 3×3 MIMO (three spatial streams)
• Maximum rate: 1.9 Gbit/s
• Smart antenna
• 20 dBm

Appearance

Interfaces

1.Ground point: connects to a ground cable.


2.GE1/PoE: a 10/100/1000M interface, which connects to the wired Ethernet and supports the PoE power supply.


3.GE0/PoE interface: a 10/100/1000M interface, which connects to the wired Ethernet and supports the PoE power supply.


4.Power input interface: 12 V DC.


5.Security slot: connects to a security lock and protects the AP against theft.


6.Default button: restores factory settings if you hold down the button more than 3s.


LED Indicators

Information Type Color Status Description
Default status after power-on Green Steady on The AP is just powered on and the software is not started yet.
Software startup status Green Steady on after blinking once After the system is reset and starts uploading the software, the indicator blinks green once. Until the software is uploaded and started, the indicator remains steady green.
Running status Green Blinking once every 2s (0.5 Hz) 1. The system is running properly, the Ethernet connection is normal, and STAs are associated with the AP.
2. The system enters the Uboot CLI.
Blinking once every 5s (0.2 Hz) The system is running properly, the Ethernet connection is normal, and no STA is associated with the AP. The system is in low power consumption state (no data is being transmitted and the EEE function takes effect).
Alarm Green Blinking once every 0.25s (4 Hz) 1. The software is being upgraded.
2. After the software is uploaded and started, the AP working in Fit AP mode enters the registration state and has not registered successfully with the AC yet.
3. The AP registration fails (the CAPWAP link is disconnected).
Fault Red Steady on A fault that affects services has occurred. The fault cannot be automatically rectified and must be rectified manually (the fault can be a DRAM detection failure or system software loading failure).
Blinking once every 0.25s (4 Hz) A fault that affects services has occurred. The fault cannot be automatically rectified and must be rectified manually (the fault can be an Ethernet interface error, such as a PHY error, or a radio interface detection failure caused by a PCI-e interface error or a baseband chip error).

Highly reliable wireless access

  • Complies with IEEE 802.11a/b/g/n/ac.
  • Supports 3 x 3 MIMO and provides a maximum rate of 1.9 Gbit/s.
  • Provides a maximum of 600 Mbit/s at the 2.4 GHz radio.
  • Uses smart antenna array technology to implements accurate and directional coverage, with suppressed interference and improved signal gain.
  • Supports aggregation of two Ethernet interfaces.
  • Supports Wi-Fi Multimedia (WMM) and priority mapping on the air interface and wired interface.
  • Supports wired link integrity check.
  • Supports load balancing.
  • Supports roaming without service interruption in Fit AP mode.
  • Supports AC dual-link backup and VRRP hot backup in Fit AP mode.
  • Supports 11ac Beamforming.
  • Uses the latest 802.11ac chip to provide higher performance and wider coverage.
  • Uses a metal shell and heat dissipation design to ensure high reliability.


Comprehensive user access control capability

  • Supports access control lists (ACLs) and implements user access control based on the user group policy.
  • Provides fine-grained bandwidth management for each user.
  • Supports user isolation policies.
  • Supports unified authentication on the AC in Fit AP mode.
  • Identifies the device type according to the organizationally unique identifier (OUI) in the MAC address, user agent (UA) information in an HTTP packet, and DHCP options in Fit AP mode.
  • The RADIUS server delivers packet forwarding, security, and QoS policies according to the device type carried in the RADIUS authentication and accounting packets in Fit AP mode.


High security

  • Open system authentication
  • WEP authentication/encryption
  • WPA/WPA2-PSK authentication and encryption
  • WPA/WPA2-802.1x authentication and encryption
  • WAPI authentication and encryption
  • Supports wireless intrusion detection system (WIDS), including rogue AP and STA detection, attack detection, STA/AP blacklist and whitelist.


Flexible networking and environment adaptability

  • Provides flexible networking capabilities and applies to various application scenarios. Mesh and WDS scenarios are supported only in Fit AP mode.
  • Has strong environment adaptability. The AP can automatically select the transmission rates, channels, and transmit power to adapt to various radio environments and avoid interference in real time.
  • Adjusts bandwidth allocation based on the user quantity and environment to improve user experience.
  • Supports the MIMO antenna system and has built-in dual-band smart antennas.
  • Identifies interference sources such as Bluetooth devices, microwave ovens, cordless phones, ZigBees, game controllers, 2.4 GHz/5 GHz wireless video and audio devices, and baby monitors in Fit AP mode and works with eSight to locate interference sources and display spectrums.


Simple device management and maintenance

  • Automatically goes online and loads the configuration, and supports plug-and-play (PnP) in Fit AP mode.
  • Supports batch upgrade.
  • Allows real-time monitoring on the network management system (NMS) to facilitate remote configuration and fast fault location.
  • Supports the Link Layer Discovery Protocol (LLDP) to implement automatic link discovery and obtain the network topology.

WLAN features

  • Compliance with IEEE 802.11a/b/g/n/ac.
  • Maximum rate: 1.9 Gbit/s
  • Maximum ratio combining (MRC)
  • Maximum-likelihood detection (MLD)
  • Data unit aggregation, including A-MPDU (Tx/Rx) and A-MSDU (Rx only)
  • 802.11 dynamic frequency selection (DFS)
  • Short GI in 20 MHz, 40 MHz, and 80 MHz modes
  • Priority mapping and packet scheduling based on a WMM profile to implement priority-based data processing and forwarding
  • Automatic and manual rate adjustment (the rate is adjusted automatically by default)
  • WLAN channel management and channel rate adjustment
  • Automatic channel scanning and interference avoidance
  • Service set identifier (SSID) hiding
  • Signal sustain technology (SST)
  • Unscheduled automatic power save delivery (U-APSD)
  • Control and Provisioning of Wireless Access Points (CAPWAP) in Fit AP mode
  • Automatic going online in Fit AP mode


Network features

  • Compliance with IEEE 802.3u
  • Auto-negotiation of the rate and duplex mode and automatic switchover between the Media Dependent Interface (MDI) and Media Dependent Interface Crossover (MDI-X)
  • SSID-based VLAN assignment
  • VLAN trunk on uplink Ethernet interfacces
  • 4094 VLAN IDs (1-4094) and a maximum of 16 virtual APs (VAPs) for each radio
  • AP control channel in tagged and untagged mode
  • DHCP client, obtaining IP addresses through DHCP
  • Tunnel data forwarding and direct data forwarding
  • STA isolation in the same VLAN
  • Access control lists (ACLs)
  • Link Layer Discovery Protocol (LLDP)
  • Uninterrupted service forwarding upon CAPWAP channel disconnection
  • Unified authentication on the AC
  • AC dual-link backup
  • Native IPv6
  • IPv4/IPv6 dual stack
  • IPv6 Portal
  • IPv6 SAVI
  • IPv4/IPv6 ACL


QoS features

  • Priority mapping and packet scheduling based on a WMM profile to implement priority-based data processing and forwarding
  • WMM parameter management for each radio
  • WMM power saving
  • Priority mapping for upstream packets and flow-based mapping for downstream packets
  • Queue mapping and scheduling
  • User-based bandwidth limiting
  • Adaptive bandwidth management (the system dynamically adjusts bandwidth based on the number of users and radio environment to improve user experience)
  • Multi-lane scheduling


Security features

  • Open system authentication
  • WEP authentication/encryption
  • WPA/WPA2-PSK authentication and encryption
  • WPA/WPA2-802.1x authentication and encryption
  • Supports wireless intrusion detection system (WIDS), including rogue AP and STA detection, attack detection, STA/AP blacklist and whitelist.
  • DHCP Snooping
  • DAI(Dynamic ARP Inspection)
  • IPSG(IP Source Guard)


Maintenance features

  • Unified management and maintenance on the AC
  • Automatically going online and loading configurations, and plug-and-play (PnP)
  • Batch upgrade
  • Local AP management through the serial interface or using Telnet
  • Real-time configuration monitoring and fast fault location using the NMS
  • System status alarm


BYOD

  • Identifies the device type according to the organizationally unique identifier (OUI) in the MAC address.
  • Identifies the device type according to the user agent (UA) information in an HTTP packet.
  • Identifies the device type according to DHCP options.
  • The RADIUS server delivers packet forwarding, security, and QoS policies according to the device type carried in the RADIUS authentication and accounting packets.


Locating Service

  • Locates tags manufactured by AeroScout or Ekahau.
  • Locates Wi-Fi terminals.


Spectrum Analysis

  • Identifies interference sources such as Bluetooth devices, microwave ovens, cordless phones, ZigBees, game controllers, 2.4 GHz/5 GHz wireless video and audio devices, and baby monitors.
  • Works with eSight to locate and perform spectrum analysis on interference sources.

Specifications

Item Description
Technical specifications Dimensions (H×W×D) 220 mm x 220 mm x 53 mm
Weight 1.1 kg
System memory 256 MB DDR3
64MB flash memory
Power specifications Power input DC 12 V ± 10%
PoE power: -48 V DC
PoE function in compliance with IEEE 802.3at
Maximum power consumption 19 W
NOTE: The actual maximum power consumption depends on local laws and regulations.
Environment parameters Operating temperature -20°C to +50°C
Storage temperature -40℃ to +70℃
Humidity 5% to 95% (non-condensing)
Waterproof grade IP41
Altitude –60 m to 4000 m


Radio Specifications

Item Description
Antenna type Built-in dual-band smart antenna (up to 12 antennas)
Antenna gain 2.4 GHz: 5dBi
5 GHz: 5 dBi
Maximum
number of
concurrent users
≤256
Maximum
transmit power
20dBm
You can adjust the transmit power from the maximum transmit power by 20 dB, with a step of 1 dB.
NOTE:Actual transmit power depends on local laws and regulations.
Maximum number of non-overlapping channels 2.4 GHz
802.11b/g
20MHz: 3
802.11n
20MHz: 3
40MHz: 1
5 GHz
802.11a
20MHz: 5
802.11n
20MHz: 5
40MHz: 2
802.11ac
20 MHz: 5
40 MHz: 2
80 MHz: 1
NOTE:The number of non-overlapping channels allowed varies in different countries. For details, see the Country codes & Channels compliance status
Channel Rate 802.11b: 1, 2, 5.5, and 11 Mbit/s
802.11a/g: 6, 9, 12, 18, 24, 36, 48, and 54 Mbit/s
802.11n data rate(2.4 GHz and 5 GHz): 6.5~600 Mbit/s
802.11ac data rate(5 GHz): 6.5 ~1300 Mbit/s
Receive sensitivity 2.4 GHz
802.11b (CCK)
-97 dBm @ 1 Mbit/s
-92 dBm @ 2 Mbit/s
-93 dBm @ 5.5 Mbit/s
-89 dBm @ 11 Mbit/s
2.4 GHz
802.11g (non-HT20)
-91 dBm @ 6 Mbit/s
-90 dBm @ 9 Mbit/s
-90 dBm @ 12 Mbit/s
-88 dBm @ 18 Mbit/s
-84 dBm @ 24 Mbit/s
-81 dBm @ 36 Mbit/s
-77 dBm @ 48 Mbit/s
-74 dBm @ 54 Mbit/s
2.4 GHz
802.11n (HT20)
-90 dBm @ MCS0
-90 dBm @ MCS1
-88 dBm @ MCS2
-82 dBm @ MCS3
-79 dBm @ MCS4
-75 dBm @ MCS5
-73 dBm @ MCS6
-72 dBm @ MCS7
-87 dBm @ MCS8
-86 dBm @ MCS9
-86 dBm @ MCS10
-83 dBm @ MCS11
-79 dBm @ MCS12
-75 dBm @ MCS13
-74 dBm @ MCS14
-73 dBm @ MCS15
-87 dBm @ MCS16
-86 dBm @ MCS17
-86 dBm @ MCS18
-83 dBm @ MCS19
-79 dBm @ MCS20
-75 dBm @ MCS21
-74 dBm @ MCS22
-73 dBm @ MCS23
2.4 GHz
802.11n (HT40)
-86 dBm @ MCS0
-86 dBm @ MCS1
-84 dBm @ MCS2
-80 dBm @ MCS3
-77 dBm @ MCS4
-72 dBm @ MCS5
-70 dBm @ MCS6
-68 dBm @ MCS7
-86 dBm @ MCS8
-86 dBm @ MCS9
-84 dBm @ MCS10
-80 dBm @ MCS11
-77 dBm @ MCS12
-72 dBm @ MCS13
-71 dBm @ MCS14
-70 dBm @ MCS15
-86 dBm @ MCS16
-86 dBm @ MCS17
-84 dBm @ MCS18
-80 dBm @ MCS19
-77 dBm @ MCS20
-72 dBm @ MCS21
-71 dBm @ MCS22
-70 dBm @ MCS23
5 GHz
802.11a (non-HT20)
-91 dBm @ 6 Mbit/s
-90 dBm @ 9 Mbit/s
-89 dBm @ 12 Mbit/s
-86 dBm @ 18 Mbit/s
-83 dBm @ 24 Mbit/s
-80 dBm @ 36 Mbit/s
-75 dBm @ 48 Mbit/s
-74 dBm @ 54 Mbit/s
5 GHz
802.11n (HT20)
-90 dBm @ MCS0
-88 dBm @ MCS1
-86 dBm @ MCS2
-81 dBm @ MCS3
-78 dBm @ MCS4
-74 dBm @ MCS5
-72 dBm @ MCS6
-71 dBm @ MCS7
-89 dBm @ MCS8
-86 dBm @ MCS9
-84 dBm @ MCS10
-80 dBm @ MCS11
-77 dBm @ MCS12
-72 dBm @ MCS13
-70 dBm @ MCS14
-69 dBm @ MCS15
-89 dBm @ MCS16
-86 dBm @ MCS17
-84 dBm @ MCS18
-80 dBm @ MCS19
-77 dBm @ MCS20
-72 dBm @ MCS21
-70 dBm @ MCS22
-69 dBm @ MCS23
5 GHz
802.11n (HT40)
-87 dBm @ MCS0
-85 dBm @ MCS1
-83 dBm @ MCS2
-79 dBm @ MCS3
-75 dBm @ MCS4
-71 dBm @ MCS5
-68 dBm @ MCS6
-67 dBm @ MCS7
-86 dBm @ MCS8
-83 dBm @ MCS9
-81 dBm @ MCS10
-76 dBm @ MCS11
-73 dBm @ MCS12
-69 dBm @ MCS13
-68 dBm @ MCS14
-66 dBm @ MCS15
-86 dBm @ MCS16
-83 dBm @ MCS17
-81 dBm @ MCS18
-76 dBm @ MCS19
-73 dBm @ MCS20
-69 dBm @ MCS21
-68 dBm @ MCS22
-66 dBm @ MCS23
5GHz
802.11ac (VTH20)
–89 dBm @ MCS0NSS1
–86 dBm @ MCS1NSS1
–84 dBm @ MCS2NSS1
–80 dBm @ MCS3NSS1
–77 dBm @ MCS4NSS1
–73 dBm @ MCS5NSS1
–71 dBm @ MCS6NSS1
–70 dBm @ MCS7NSS1
–65 dBm @ MCS8NSS1
5GHz
802.11ac (VTH40)
–86 dBm @ MCS0NSS1
–83 dBm @ MCS1NSS1
–81 dBm @ MCS2NSS1
–77 dBm @ MCS3NSS1
–74 dBm @ MCS4NSS1
–70 dBm @ MCS5NSS1
–68 dBm @ MCS6NSS1
–67 dBm @ MCS7NSS1
–63 dBm @ MCS8NSS1
–60 dBm @ MCS9NSS1
5GHz
802.11ac (VTH80)
–82 dBm @ MCS0NSS1
–80 dBm @ MCS1NSS1
–78 dBm @ MCS2NSS1
–74 dBm @ MCS3NSS1
–71 dBm @ MCS4NSS1
–66 dBm @ MCS5NSS1
–65 dBm @ MCS6NSS1
–64 dBm @ MCS7NSS1
–59 dBm @ MCS8NSS1
–57 dBm @ MCS9NSS1

The AP7030DE provides high-performance wireless services for large and medium enterprises in high-density scenarios.


Fit AP networking (AP mode):

In this networking, the AP functions as a Fit AP and provides only data forwarding functions. The wireless access controller (AC) is responsible for user access, AP going online, AP management, authentication, routing, security, and QoS.



DOCUMENTATION CENTER NEWS ROOM CASE STUDIES VIDEO ZONE PUBLICATIONS SHARE