AP6010 Series Access Point - Huawei Products
Under Construction!

Prompt

You have not logged in. Want to enter the login page?

Yes No

Prompt

Sorry that you are not authorized to download this document.

Apply Previous

Register an account

  • *
  • *
  • *
  • *
  • *
  • I agree that Huawei representatives may contact me.
  • I agree to receive information on Huawei products by email.
  • Terms of UsePrivacy Policy

If you already have a Huawei account, please login to download

AP6010 Series Access Point

The AP6010 series enhanced access points use an elegant design and are intended for use in medium- and large-scale deployment scenarios, such as educational institutions, enterprise offices, airports, stations, and retail markets . This series is available in two models: AP6010SN-GN and AP6010DN-AGN.
• 2×2MIMO (two spatial streams)
• Fit/Fat mode
• PoE or DC power supply
• Built-in antennas
• 20 dbm

The AP6010 series includes AP6010DN-AGN and AP6010SN-GN, which have the same appearance, ports, and indicators.


Appearance


Ports

1.Console interface.


2.ETH/PoE interface: a 10/100/1000M interface, which connects to the wired Ethernet and supports PoE power supply.


3.Default button: restores factory settings if you hold down the button more than 3s.


4.Power input interface: 12 V DC.


5.Lock interface: protects the AP against theft.



LED Indicators

Type Color Frequency Description
Default status Green Steady on When the system is being powered on, the indicator is steady green. When the system software is running, the indicator status depends on the software running result.
Running Green 0.5 Hz The system is running properly, the Ethernet connection is correct, and STAs are associated with the AP.
0.2 Hz The system is running properly, and the Ethernet connection is correct. However, no user connects to the AP, and the system is in low-power state.
Alarm Green 4 Hz The CAPWAP link is disconnected during an upgrade.
Error Red Steady on A fault that affects services occurs and cannot be rectified automatically. For example, the system fails to load the DRAM or system software. The fault needs to be rectified manually.

Highly reliable wireless access

  • AP6010DN-AGN: complies with IEEE 802.11a/b/g/n.
  • AP6010SN-GN: complies with IEEE 802.11b/g/n.
  • Supports 2 x 2 MIMO and provides a maximum rate of 600 Mbit/s.
  • Supports Wi-Fi Multimedia (WMM) and priority mapping on the air interface and wired interface.
  • Supports wired link integrity check.
  • Supports load balancing.
  • Supports roaming without service interruption in Fit AP mode.
  • Supports AC dual-link backup and VRRP hot backup in Fit AP mode.
  • Supports 11n beamforming.
  • Uses the latest 802.11n chip to provide higher performance and wider coverage.


Comprehensive user access control capability

  • Supports access control lists (ACLs) and implements user access control based on the user group policy.
  • Provides fine-grained bandwidth management for each user.
  • Supports user isolation policies.
  • Supports unified authentication on the AC in Fit AP mode.
  • Identifies the device type according to the organizationally unique identifier (OUI) in the MAC address, user agent (UA) information in an HTTP packet, and DHCP options in Fit AP mode.
  • The RADIUS server delivers packet forwarding, security, and QoS policies according to the device type carried in the RADIUS authentication and accounting packets in Fit AP mode.


High security

  • Open system authentication
  • WEP authentication/encryption
  • WPA/WPA2-PSK authentication and encryption
  • WPA/WPA2-802.1x authentication and encryption
  • WAPI authentication and encryption
  • Supports wireless intrusion detection system (WIDS) and wireless intrusion prevention system (WIPS), including rogue device detection and countermeasure, attack detection and dynamic blacklist, STA/AP blacklist and whitelist.


Flexible networking and environment adaptability

  • Provides flexible networking capabilities and applies to various application scenarios. Mesh and WDS scenarios are supported only in Fit AP mode.
  • Has strong environment adaptability. The AP can automatically select the transmission rates, channels, and transmit power to adapt to various radio environments and avoid interference in real time.
  • Adjusts bandwidth allocation based on the user quantity and environment to improve user experience.
  • Identifies interference sources such as bluetooth devices, microwave ovens, cordless phones, ZigBees, game controllers, 2.4 GHz/5 GHz wireless video and audio devices, and baby monitors in Fit AP mode and works with eSight to locate interference sources and display spectrums.


Simple device management and maintenance

  • Automatically goes online and loads the configuration, and supports plug-and-play (PnP) in Fit AP mode.
  • Supports batch upgrade.
  • Allows real-time monitoring on the network management system (NMS) to facilitate remote configuration and fast fault location.
  • Supports the Link Layer Discovery Protocol (LLDP) to implement automatic link discovery and obtain the network topology.

WLAN features

  • AP6010DN-AGN: complies with IEEE 802.11a/b/g/n.
  • AP6010SN-GN: complies with IEEE 802.11b/g/n.
  • AP6010SN-GN: maximum rate of 300 Mbit/s
  • AP6010DN-AGN: maximum rate of 600 Mbit/s
  • Maximum ratio combining (MRC)
  • Maximum-likelihood detection (MLD)
  • Data unit aggregation, including A-MPDU (Tx/Rx) and A-MSDU (Rx only)
  • AP6010DN-AGN: supports 802.11 dynamic frequency selection (DFS).
  • Short GI in 20 MHz and 40 MHz modes
  • Priority mapping and packet scheduling based on a Wi-Fi Multimedia (WMM) profile to implement priority-based data processing and forwarding
  • Automatic and manual rate adjustment (the rate is adjusted automatically by default)
  • WLAN channel management and channel rate adjustment
  • Automatic channel scanning and interference avoidance
  • Service set identifier (SSID) hiding
  • Signal sustain technology (SST)
  • Unscheduled automatic power save delivery (U-APSD)
  • Control and Provisioning of Wireless Access Points (CAPWAP) in Fit AP mode
  • Automatic login in Fit AP mode
  • Wireless distribution system (WDS) in Fit AP mode
  • Mesh networking in Fit AP mode


Network features

  • Compliance with IEEE 802.3u
  • Auto-negotiation of the rate and duplex mode and automatic switchover between the Media Dependent Interface (MDI) and Media Dependent Interface Crossover (MDI-X)
  • SSID-based VLAN assignment
  • VLAN trunk on uplink Ethernet ports
  • 4094 VLAN IDs (1-4094) and a maximum of 16 virtual APs (VAPs) for each radio
  • AP control channel in tagged and untagged mode
  • DHCP client, obtaining IP addresses through DHCP
  • Tunnel data forwarding and direct data forwarding
  • STA isolation in the same VLAN
  • Access control lists (ACLs)
  • Link Layer Discovery Protocol (LLDP)
  • Uninterrupted service forwarding upon CAPWAP channel disconnection in Fit AP mode
  • Unified authentication on the AC in Fit AP mode
  • AC dual-link backup and VRRP hot backup in Fit AP mode
  • Native IPv6
  • IPv4/IPv6 dual stack
  • IPv6 Portal
  • IPv6 SAVI
  • IPv4/IPv6 ACL


QoS features

  • Priority mapping and packet scheduling based on a Wi-Fi Multimedia (WMM) profile to implement priority-based data processing and forwarding
  • WMM parameter management for each radio
  • WMM power saving
  • Priority mapping for upstream packets and flow-based mapping for downstream packets
  • Queue mapping and scheduling
  • User-based bandwidth limiting
  • Adaptive bandwidth management (the system dynamically adjusts bandwidth based on the number of users and radio environment to improve user experience)


Security features

  • Open system authentication
  • WEP authentication/encryption
  • WPA/WPA2-PSK authentication and encryption
  • WPA/WPA2-802.1x authentication and encryption
  • WAPI authentication and encryption
  • Supports wireless intrusion detection system (WIDS), including rogue AP and STA detection, attack detection, STA/AP blacklist and whitelist.
  • DHCP Snooping
  • DAI(Dynamic ARP Inspection)
  • IPSG(IP Source Guard)


Maintenance features

  • Unified management and maintenance on the AC in Fit AP mode
  • Automatic login and configuration loading, and plug-and-play (PnP) in Fit AP mode
  • WDS zero-configuration deployment in Fit AP mode
  • Mesh network zero-configuration deployment in Fit AP mode
  • Batch upgrade
  • Local AP management through the serial interface or using Telnet
  • Real-time configuration monitoring and fast fault location using the NMS
  • System status alarm
  • Dying Gasp


BYOD

  • Identifies the device type according to the organizationally unique identifier (OUI) in the MAC address.
  • Identifies the device type according to the user agent (UA) information in an HTTP packet.
  • Identifies the device type according to DHCP options.
  • The RADIUS server delivers packet forwarding, security, and QoS policies according to the device type carried in the RADIUS authentication and accounting packets.


Locating Service

  • Locates tags manufactured by AeroScout or Ekahau.
  • Locates Wi-Fi terminals.


Spectrum Analysis

  • Identifies interference sources such as bluetooth devices, microwave ovens, cordless phones, ZigBees, game controllers, 2.4 GHz/5 GHz wireless video and audio devices, and baby monitors.
  • Works with eSight to locate and perform spectrum analysis on interference sources.

Specifications

Item Description
Technical specifications Dimensions (H×W×D) 50 mm×180 mm×180 mm
Weight 0.4 kg
System memory 128 MB DRAM
32 MB flash memory
Power specifications Power input DC 12V±10%
POE Power: -48V DC
PoE function in compliance with IEEE 802.3af and 802.3at
Maximum power consumption AP6010DN-AGN: 10.2 W
AP6010SN-GN: 6.5 W
NOTE:The maximum power consumption depends on local laws.
Environment parameters Operating temperature -10℃ to +50℃
Storage temperature -40℃ to +70℃
Humidity 5% to 95% (non-condensing)
Waterproof grade IP31
Altitude -60m to 4000 m


Radio Specifications

Item Description
Antenna type Built-in antenna
Antenna gain AP6010DN-AGN
2.4 GHz: 4 dBi
5 GHz: 5 dBi
AP6010SN-GN: 4 dBi
Maximum number of concurrent users 128
Maximum transmit power 20dBm You can adjust the transmit power from the maximum transmit power by 20 dB, with a step of 1 dB. NOTE:Actual transmit power depends on local laws and regulations.
Maximum number of non-overlapping channels for AP6010DN-AGN 2.4 GHz
802.11b/g
20MHz: 3
802.11n
20MHz: 3
40MHz: 1
5 GHz
802.11a
20MHz: 5
802.11n
20MHz: 5
40MHz: 2
NOTE:The number of non-overlapping channels allowed varies in different countries. For details, see the Country codes & Channels compliance status
Maximum number of non-overlapping channels for AP6010SN-GN 802.11b/g
20MHz: 3
802.11n
20MHz: 3
40MHz: 1
NOTE:The number of non-overlapping channels allowed varies in different countries. For details, see the Country codes & Channels compliance status
Channel
Rate
802.11b: 1, 2, 5.5, and 11 Mbit/s
802.11g: 6, 9, 12, 18, 24, 36, 48, and 54 Mbit/s
802.11n data rate:
AP6010DN-AGN: 2.4 GHz and 5 GHz
AP6010SN-GN: 2.4 GHz
GI2=800ns GI=400ns
20 MHz (Mbit/s) 40 MHz (Mbit/s) 20 MHz (Mbit/s) 40 MHz (Mbit/s)
6.5 @ MCS10 13.5 @ MCS0 7.2 @ MCS0 15 @ MCS0
13 @ MCS1 27 @ MCS1 14.4 @ MCS1 30 @ MCS1
19.5 @ MCS2 40.5 @ MCS2 21.7 @ MCS2 45 @ MCS2
26 @ MCS3 54 @ MCS3 28.9 @ MCS3 60 @ MCS3
39 @ MCS4 81 @ MCS4 43.3 @ MCS4 90 @ MCS4
52 @ MCS5 108 @ MCS5 57.8 @ MCS5 120 @ MCS5
58.5 @ MCS6 121.5 @ MCS6 65 @ MCS6 135 @ MCS6
65 @ MCS7 135 @ MCS7 72.2 @ MCS7 150 @ MCS7
13 @ MCS8 27 @ MCS8 14.4 @ MCS8 30 @ MCS8
26 @ MCS9 54 @ MCS9 28.9 @ MCS9 60 @ MCS9
39 @ MCS10 81 @ MCS10 43.3 @ MCS10 90 @ MCS10
52 @ MCS11 108 @ MCS11 57.8 @ MCS11 120 @ MCS11
78 @ MCS12 162 @ MCS12 86.7 @ MCS12 180 @ MCS12
104 @ MCS13 216 @ MCS13 115.6 @ MCS13 240 @ MCS13
117 @ MCS14 243 @ MCS14 130 @ MCS14 270 @ MCS14
130 @ MCS15 270 @ MCS15 144.4 @ MCS15 300 @ MCS15
NOTE:Modulation coding scheme (MCS) index: determines the spatial flow quantity, modulation, coding rate, and data rate.
Guard interval (GI): indicates the period in nanoseconds the radio listens between packets.
Receiver sensitivity of the AP6010DN-AGN 2.4 GHz
802.11b (CCK)
-97 dBm @ 1 Mbit/s
-92 dBm @ 2 Mbit/s
-92 dBm @ 5.5 Mbit/s
-90 dBm @ 11 Mbit/s
2.4 GHz
802.11g (non-HT20)
-92 dBm @ 6 Mbit/s
-91 dBm @ 9 Mbit/s
-90 dBm @ 12 Mbit/s
-87 dBm @ 18 Mbit/s
-83 dBm @ 24 Mbit/s
-80 dBm @ 36 Mbit/s
-76 dBm @ 48 Mbit/s
-74 dBm @ 54 Mbit/s
2.4 GHz
802.11n (HT20)
-92 dBm @ MCS0/8
-89 dBm @ MCS1/9
-86 dBm @ MCS2/10
-82 dBm @ MCS3/11
-79 dBm @ MCS4/12
-74 dBm @ MCS5/13
-73 dBm @ MCS6/14
-71 dBm @ MCS7/15
2.4 GHz
802.11n (HT40)
-89 dBm @ MCS0/8
-86 dBm @ MCS1/9
-83 dBm @ MCS2/10
-79 dBm @ MCS3/11
-76 dBm @ MCS4/12
-72 dBm @ MCS5/13
-70 dBm @ MCS6/14
-68 dBm @ MCS7/15
5 GHz
802.11a (non-HT20)
-89 dBm @ 6 Mbit/s
-88 dBm @ 9 Mbit/s
-85 dBm @ 12 Mbit/s
-83 dBm @ 18 Mbit/s
-80 dBm @ 24 Mbit/s
-76 dBm @ 36 Mbit/s
-71 dBm @ 48 Mbit/s
-70 dBm @ 54 Mbit/s
5 GHz
802.11n (HT20)
-88 dBm @ MCS0/8
-85 dBm @ MCS1/9
-84 dBm @ MCS2/10
-77 dBm @ MCS3/11
-74 dBm @ MCS4/12
-70 dBm @ MCS5/13
-68 dBm @ MCS6/14
-67 dBm @ MCS7/15
5 GHz
802.11n (HT40)
-85 dBm @ MCS0/8
-80 dBm @ MCS1/9
-78 dBm @ MCS2/10
-74 dBm @ MCS3/11
-71 dBm @ MCS4/12
-67 dBm @ MCS5/13
-65 dBm @ MCS6/14
-63 dBm @ MCS7/15
Receiver sensitivity of the AP6010SN-GN 802.11b (CCK):
-97 dBm @ 1 Mbit/s
-92 dBm @ 2 Mbit/s
-92 dBm @ 5.5 Mbit/s
-90 dBm @ 11 Mbit/s
802.11g (non-HT20):
-92 dBm @ 6 Mbit/s
-91 dBm @ 9 Mbit/s
-90 dBm @ 12 Mbit/s
-87 dBm @ 18 Mbit/s
-83 dBm @ 24 Mbit/s
-80 dBm @ 36 Mbit/s
-76 dBm @ 48 Mbit/s
-74 dBm @ 54 Mbit/s
802.11n (HT20):
-92 dBm @ MCS0/8
-89 dBm @ MCS1/9
-86 dBm @ MCS2/10
-82 dBm @ MCS3/11
-79 dBm @ MCS4/12
-74 dBm @ MCS5/13
-73 dBm @ MCS6/14
-71 dBm @ MCS7/15
802.11n (HT40):
-89 dBm @ MCS0/8
-86 dBm @ MCS1/9
-83 dBm @ MCS2/10
-79 dBm @ MCS3/11
-76 dBm @ MCS4/12
-72 dBm @ MCS5/13
-70 dBm @ MCS6/14
-68 dBm @ MCS7/15

The AP6010DN-AGN and AP6010SN-GN provide wireless services for enterprise scenarios with medium size, dense users, and high capacity demands. The AP6010DN-AGN can be flexibly deployed and work in both fit AP and bridge mode.


The AP6010DN-AGN and AP6010SN-GN can work as a Fat AP or Fit AP and switch flexibly between the two working modes based on the network plan.


When the wireless network scale is small, customers need to purchase only AP products and set the APs to work as Fat APs. As the network scale expands, tens of or hundreds of APs exist on the network. To simplify network management, customers are advised to purchase ACs to perform centralized management on the APs and set the APs to work as Fit APs.


Fit AP networking (AP mode):

In this networking, the AP functions as a fit AP and provides only data forwarding functions. The AC is responsible for user access, AP go-online, AP management, authentication, routing, security, and QoS.


Fit AP networking (WDS mode: point-to-point):

Fit AP networking (WDS mode: point-to-multipoint):

In this networking, the AP connects two or more independently wired or wireless LANs through wireless links to construct a network on which users can exchange data. In Wireless Distribution System (WDS) mode, the AP supports point-to-point (P2P) and point-to-multipoint (P2MP) networking modes. With 5 GHz and 2.4 GHz frequency bands, the AP can implement wireless bridging and access functions.



Fit AP mesh networking:

On the preceding network, APs function as mesh points (MPs) and are fully-meshed to establish an auto-configured and self-healing wireless mesh network (WMN). APs with the gateway function can work as the mesh portal points (MPPs) through which the WMN can provide access to the Internet. Terminals connect to APs to access the WMN. The WMN uses dedicated mesh routing protocols to guarantee high transmission quality and is more applicable to scenarios that require high bandwidth and highly stable Internet connections.



Fat AP networking:

On the preceding network, the device functions as a Fat AP to implement functions such as user access, authentication, data security, service forwarding, and QoS.


Technology Topics


Case Studies

DOCUMENTATION CENTER NEWS ROOM CASE STUDIES VIDEO ZONE PUBLICATIONS SHARE