RF Coaxial Connectors - Huawei Products
Under Construction!

Prompt

You have not logged in. Want to enter the login page?

Yes No

Prompt

Sorry that you are not authorized to download this document.

Apply Previous

Register an account

  • *
  • *
  • *
  • *
  • *
  • I agree that Huawei representatives may contact me.
  • I agree to receive information on Huawei products by email.
  • Terms of UsePrivacy Policy

If you already have a Huawei account, please login to download

RF Coaxial Connectors

Only 2 m, 3 m, and 5 m RF connecting lines are provided based on standard configurations. In some special scenarios, RF connecting lines in need exceed the range of standard RF connecting lines. In this case, RF coaxial connectors can be used to extend the RF connecting lines or to make RF connecting lines of customized length onsite. The RF coaxial connectors are applicable to Huawei AP6510DN/AP6610DN/AP6310SN series APs.

Appearance

A0RFCON04:


GM-ANT FED-1/2:


Model

A0RFCON04

GM-ANT FED-1/2

Type

N

N

Iumpedance

50Ω

50Ω

Structure

Straight

Straight

Connection Properties

Female

Male

Installation form

With cable connected with an N-type connector

With 1/2 inch feeder

Standing-wave ratio

≤1.3

≤1.15

A0RFCON04 can be used to extend RF connecting lines. For example, if 7 m connecting lines are required, you can use an RF coaxial connector to connect a 2 m RF connecting line and a 5 m RF connecting line. As shown in the following figure, the A0RFCON04 is a Type N connector and is optional based on the site survey.


GM-ANT FED-1/2 can be used to make RF connecting lines of customized length onsite. As shown in the following figure, each coaxial cable must be configured with two RF coaxial connectors (Type N connectors). For details about the model selection, contact Huawei network planning engineers.


Technology Topics


Case Studies

DOCUMENTATION CENTER NEWS ROOM CASE STUDIES VIDEO ZONE PUBLICATIONS SHARE