OptiX OSN 500 - Huawei Products
Under Construction!

Prompt

You have not logged in. Want to enter the login page?

Yes No

Prompt

Sorry that you are not authorized to download this document.

Apply Previous

Register an account

  • *
  • *
  • *
  • *
  • *
  • I agree that Huawei representatives may contact me.
  • I agree to receive information on Huawei products by email.
  • Terms of UsePrivacy Policy

If you already have a Huawei account, please login to download

OptiX OSN 500

Supporting a variety of service access modes, the OptiX OSN 500 is a new-generation optical transmission product with pure SDH or packet architecture, completing Huawei's optical transmission system and honing the optical transmission product line’s competitive edge.


Small Box with Powerful Function

  • Smart transport based on universal switch for all types of services, including Ethernet, ATM, TDM, and future services.
  • Single-fiber bidirectional function to resolve fiber resource restrictions.
  • Same platform with the OSN 550 and board compatible, conserving spare parts


Easy Maintenance, Excellent Environmental Adaptability

  • SCC unit, cross-connect unit, clock unit, tributary unit, line unit, and data transparent transmission unit integrated in one board, and different device types adapt to different scenarios.
  • Flexible power supply, DC (-48V/-60V)/AC (110V/220V) solution, 10 hours power supply with UPM when the mains supply is interrupted.
  • Work temperature up to 65℃, can be deployed outdoors, in the desert, and in other harsh environments.


Energy Saving, Environmental Protection

  • Intelligent power consumption control, idle path power down, intelligent fan speed adjustment.
  • Lowest power consumption in the industry, 30% below average.
  • Comply with RoHS/WEEE directive, adopting a variety of technologies to reduce equipment energy, designed according to the environmental protection requirements.


TP-Assist for Easy OAM

  • MPLS-TP based OAM solution “TP-Assist” provides efficient planning, fast deployment and easy maintenance, making the large-scale packet network easily manageable
  • Traffic based crystal clear OAM is supported with visual network-level view, graphical format to display end-to-end service configuration, performance and status.
  • Better maintenance experience even than SDH: visualized end-to-end bandwidth management, intelligent location of 92% failures, analyzable and predicable network management.


Industry Certification

  • Pass EN 50121-4 Railway EMC certification.

OptiX OSN 500 Product Specifications

System Features  
Subrack dimensions 44mm (H) x 442mm (W) x 220mm(D)
Switching capacity Packet: 7.2 Gbit/s or TDM: 20 Gbit/s (higher order), 5 Gbit/s (lower order)
Service slots 2 service interface slots
Supported interfaces Packet transport interfaces E1, ch STM-1, ATM STM-1,FE/GE
MSTP interfaces STM-1/4, E1/E3/T1/T3, FE/GE
WDM interfaces 40-channel DWDM interfaces, compliant with ITU-T G.694.1
8-channel CWDM interfaces, compliant with ITU-T G.694.2
Networking Mode Supports pure packet or SDH networking
Supports WDM networking
Supports single-fiber bidirectional transmission
Power Supply -38.4~-72V DC; 110/220V AC
Installation ETSI rack with 300mm/600mm depth
19-inch rack
Wall-mount
Desktop
Out-door cabinet
Weight ≤ 5 kg
Operation Environment Temperature Relative Humidity
Long term: -5°C ~ 55°C 10% ~ 90%
Short term: -5°C ~ 65°C 5% ~ 95%
Packet Transport Features  
Service features E-Line and E-LAN
QinQ
MPLS-TP based VPWS and VPLS
Multi-section pseudo-wire (MS-PW)
TDM PWE3: CESoPSN and SAToP, compression of idle timeslots
ATM/IMA PWE3
ETH PWE3
IGMP SNOOPING V2
Blacklist, Broadcast packet suppression, ACL
VLAN SWAP
QoS features DiffServ mode based on traffic classification
Simple traffic classification, complex traffic classification, per hop behavior (PHB), and ACL
Committed access rate (CAR)
PQ scheduling priority, weighted round robin (WRR) and PQ+WRR queuing
Tail drop and weighted random early detection (WRED)
Eight priority queues
Shaping based on port scheduling priority
Hardware-based OAM MPLS OAM LSP/PW OAM:
FDI, BDI
CV, FFD, TraceRoute, Ping
CES PW VCCV
MPLS-TP OAM LSP/PW OAM:
CC、LB、LT
AIS、RDI
LM、DM
LCK、TST
CSF
Section OAM:
CC、LB
RDI
LM、DM
LCK、TST
Ethernet OAM ETH-CC(Continuity Check)、ETH-Loopback、ETH-Link Trace
Remote Loopback、Remote Fault Detection
ATM OAM
RMON(RFC 2819)
Flexible design with multiple protocols
Carrier-class protection LSP/PW Linear protection
MPLS-TP Ring protection
ERPS(G.8032)
Anti multifailure protection based on MS-PW
Link aggregation group (LAG) protection
LPT
STP/RSTP/MSTP
IMA protection
1+1 and 1:1 Linear MSP
Clock synchronization One external clock input/output (2 MHz or 2 Mbit/s)
two external time signals(1pps+TOD)
Adaptive clock recovery (ACR)
Synchronous Ethernet
IEEE 1588v2
MSTP Features
Carrier-class protection SDH Network Protection
2-fiber MS-SP Ring; 1+1, 1:n (n<=14) Linear MSP; SNCP; Fiber shared virtual path protection
Ethernet Service Protection
RSTP, LAG, LPT
Clock synchronization One external clock inputs/outputs (2 MHz or 2 Mbit/s)
Line clock source
Tributary clock source

DOCUMENTATION CENTER NEWS ROOM CASE STUDIES VIDEO ZONE PUBLICATIONS SHARE