OptiX OSN 550 - Huawei Products
Under Construction!

Prompt

You have not logged in. Want to enter the login page?

Yes No

Prompt

Sorry that you are not authorized to download this document.

Apply Previous

Register an account

  • *
  • *
  • *
  • *
  • *
  • I agree that Huawei representatives may contact me.
  • I agree to receive information on Huawei products by email.
  • Terms of UsePrivacy Policy

If you already have a Huawei account, please login to download

OptiX OSN 550

The OptiX OSN 550 is next-generation optical transmission equipment used at the access layer of the transmission network, supporting Multi-Protocol Label Switching (MPLS) technology and a variety of service network topologies in the Time Division Multiplexing (TDM) and packet domains.


Small Box with Powerful Function

  • Smart transport based on universal switch for all types of services, including Ethernet, ATM, TDM, and future services.
  • BIDI and built-in WDM functions overcome fiber resource restrictions.
  • 2U height, flexible and powerful networking with STM-16/10GE interfaces.


Easy Maintenance, Excellent Environmental Adaptability

  • Installation at anywhere, wall-mounted, desktop, 19’’ cabinet, 300/600 mm ETSI cabinet, outdoor cabinet
  • Flexible power supply, DC (-48V/-60V)/AC (110V/220V) solution, 10 hours power supply with UPM when the mains supply is interrupted.
  • Work temperature up to 65℃, can be deployed outdoors, in the desert, and in other harsh environments.


Energy Saving, Environmental Protection

  • Intelligent power consumption control, idle path power down, intelligent fan speed adjusting.
  • Lowest power consumption in the industry, 30% below average.
  • Comply with RoHS/WEEE directive, adopting a variety of technologies to reduce equipment energy, designed according to the environmental protection requirements.


TP-Assist for Easy OAM

  • MPLS-TP based OAM solution “TP-Assist” provides efficient planning, fast deployment and easy maintenance, making the large-scale packet network easily manageable
  • Traffic based crystal clear OAM is supported with visual network-level view, graphical format to display end-to-end service configuration, performance and status.
  • Better maintenance experience even than SDH: visualized end-to-end bandwidth management, intelligent location of 92% failures, analyzable and predicable network management.


Industry Certification

  • Pass EN 50121-4 Railway EMC certification.

OptiX OSN 550 Product Specifications

System Features  
Subrack dimensions 88 mm (H) x 442 mm (W) x 220 mm (D)
Switching capacity Packet: 60 Gbit/s and TDM: 20 Gbit/s (higher order), 5 Gbit/s (lower order)
Service slots 6 service interface slots
Highly reliable design 1+1 hot backup for power supply modules
1+1 hot backup for the system control boards
1+1 hot backup for the cross-connect and synchronous timing boards
Supported interfaces Packet transport interfaces E1, ch STM-1, ATM STM-1, FE/GE/10GE
MSTP interfaces STM-1/4/16, E1/E3/T1/T3, FE/GE
WDM interfaces 40-channel DWDM interfaces, compliant with ITU-T G.694.1
8-channel CWDM interfaces, compliant with ITU-T G.694.2
Networking Mode Supports pure packet,hybrid (packet + SDH) or SDH networking
Supports WDM networking
Supports single-fiber bidirectional transmission
Power Supply -38.4~-72V DC; 110/220V AC
Installation ETSI rack with 300mm/600mm depth
19-inch rack
Wall-mount
Desktop
Out-door cabinet
Weight Net weight of the subrack (no board or fan): 2.78 kg
Typical configuration: 5.8kg
Operation Environment Temperature Relative Humidity
Long term: -5°C ~ 55°C 10% ~ 90%
Short term: -5°C ~ 65°C 5% ~ 95%
Packet Transport Features  
Service features E-Line and E-LAN
QinQ
MPLS-TP based VPWS and VPLS
Multi-section pseudo-wire (MS-PW)
TDM PWE3: CESoPSN and SAToP, compression of idle timeslots
ATM/IMA PWE3
ETH PWE3
IGMP SNOOPING V2
Blacklist, Broadcast packet suppression, ACL
VLAN SWAP
QoS features DiffServ mode based on traffic classification
Simple traffic classification, complex traffic classification, per hop behavior (PHB), and ACL
Committed access rate (CAR)
PQ scheduling priority, weighted round robin (WRR) and PQ+WRR queuing
Tail drop and weighted random early detection (WRED)
Eight priority queues
Shaping based on port scheduling priority
Hardware-based OAM MPLS OAM LSP/PW OAM:
FDI, BDI
CV, FFD, TraceRoute, Ping
CES PW VCCV
MPLS-TP OAM LSP/PW OAM:
CC、LB、LT
AIS、RDI
LM、DM
LCK、TST
CSF
Section OAM:
CC、LB
RDI
LM、DM
LCK、TST
Ethernet OAM ETH-CC(Continuity Check)、ETH-Loopback、ETH-Link Trace
Remote Loopback、Remote Fault Detection
ATM OAM
RMON(RFC 2819)
Flexible design with multiple protocols
Carrier-class protection LSP/PW Linear protection
MPLS-TP Ring protection
ERPS(G.8032)
Anti multifailure protection based on MS-PW
Link aggregation group (LAG) protection
LPT
STP/RSTP/MSTP
IMA protection
1+1 and 1:1 Linear MSP
Clock synchronization Two external clock inputs/outputs (2 MHz or 2 Mbit/s)
Two external time signals(1pps+TOD)
Adaptive clock recovery (ACR)
Synchronous Ethernet
IEEE 1588v2
MSTP Features
Carrier-class protection SDH Network Protection
2-fiber MS-SP Ring; 1+1, 1:n (n<=14) Linear MSP; SNCP; Fiber shared virtual path protection; DNI (ITU-T G.842)
Ethernet Service Protection
RSTP, LAG, LPT
Clock synchronization Two external clock inputs/outputs (2 MHz or 2 Mbit/s)
Line clock source
Tributary clock source

DOCUMENTATION CENTER NEWS ROOM CASE STUDIES VIDEO ZONE PUBLICATIONS SHARE