OptiX OSN 3500 - Huawei Products
Under Construction!

Prompt

You have not logged in. Want to enter the login page?

Yes No

Prompt

Sorry that you are not authorized to download this document.

Apply Previous

Register an account

  • *
  • *
  • *
  • *
  • *
  • I agree that Huawei representatives may contact me.
  • I agree to receive information on Huawei products by email.
  • Terms of UsePrivacy Policy

If you already have a Huawei account, please login to download

OptiX OSN 3500

To meet the growing demands of Metropolitan Area Networks (MANs), Huawei has developed the OptiX OSN 3500—next-generation intelligent optical transmission system. Primarily used at the metropolitan convergence and backbone layer, the OptiX OSN 3500 incorporates an intelligent optical transmission platform and core optical transmission system to schedule and transmit services of different types and granularities. Leveraging "universal switch" architecture, the OptiX OSN 3500 can be used in packet or Time Division Multiplexing (TDM) mode. Combined with other Huawei equipment, the OptiX OSN 3500 supports various networking applications, such as pure packet mode, hybrid networking (packet and TDM mode overlay networking), and pure TDM mode. A proper networking solution can optimize both data and conventional Synchronous Digital Hierarchy (SDH) service processing.


Large switching capacity

  • 200G high order, 20G low order


High integration

  • Subrack dimensions 722mm (H) x 497mm (W) x 295mm (D), 15 slots for processing boards and 16 slots for interface boards


Flexible networking capacity

  • Supports Mesh networking with plug-and-play network nodes
  • Supports dynamic increase of rate and capacity
  • Supports various networking topologies, including chain, ring, tangent rings, intersecting rings, etc
  • Supports maximum 2 STM-64 four-fiber MSP rings, 4 STM-64 two-fiber MSP rings, 11 STM-16 four-fiber MSP rings, 12 STM-16 two-fiber MSP rings


Carrier-class protection

  • Mesh Protection and restoration(ASON)
  • Distributed restorable rerouting protection
  • 5-level service dedicated protection scheme based on different SLA: Diamond, Gold, Silver, Copper and Iron services
  • SDH Network Protection
  • 2/4 fiber MSP Ring; 1+1, 1: n Linear MSP; SNCP/SNCMP/SNCTP; Fiber shared virtual path protection; Fiber shared MSP Ring; DNI (ITU-T G.842)
  • Service Protection
  • Ethernet: RPR, RSTP
  • ATM: VP-RING/VC-RING


Highly reliable design

  • 1+1 hot backup for system control boards, cross-connect and synchronous timing boards
  • 1+1 hot backup for power supply modules
  • Redundancy protection for fan modules
  • TPS protection
  • 1:n tributary protection for E1/T1/E3/T3/ E4/STM-1(e)/FE


Enterprise-focused Features

  • Intelligent ASON based Mesh network can against multi-node failures, improving network reliability by 10 times
  • Built-in PCM for real All-in-One solution to access low speed services for enterprise customer
  • Single-span transmission for a distance of 270km without a Raman amplifier, fewer REGs to reduce the network construction cost and facilitate the maintenance
  • Specified 2M optical interface to support direct connection between MSTP equipment and relay protection device, lower risk and higher reliability


Industry Certification

  • Pass EN 50121-4 Railway EMC certification.

OptiX OSN 3500 Product Specifications

System Features
Subrack dimensions 722 mm (H) x 497 mm (W) x 295 mm (D)
Switching capacity Packet: 160 Gbit/s and TDM: 200 Gbit/s (higher order), 20 Gbit/s (lower order)
Service slots 15 slots for processing boards and 16 slots for interface boards
Highly reliable design 1+1 hot backup for power supply modules, system control boards, cross-connect and synchronous timing boards
Redundancy protection for fan modules
Supported interfaces Packet transport interfaces E1, ch STM-1, ATM STM-1, FE/GE/10GE
MSTP INTERFACES STM-1/4/16/64, E1/E3/E4/T1/T3, FE/GE/10GE, DDN, IMA/ATM, FEC/EFEC interface, E1 optical interface, SAN, Video
PCM interfaces FXS/FXO, 2/4 wire/E&M
V.35/X.21/V.11/V.24/V.28, RS232/422
WDM INTERFACES 40-channel DWDM interfaces, compliant with ITU-T G.694.1
8-channel CWDM interfaces, compliant with ITU-T G.694.2
Networking Mode Supporting pure packet,hybrid (packet + SDH) or SDH networking Supporting WDM networking
Supporting single-fiber bidirectional transmission
Power Supply -38.4~ -72V DC; 110/220V AC (External module)
Operation Environment Temperature Relative Humidity
Long term: 0°C ~ 45°C 10% ~ 90%
Short term: -5°C ~ 55°C 5% ~ 95%
Packet Transport Features
Service features E-Line and E-LAN
QinQ
MPLS-TP based VPWS and VPLS
Multi-section pseudo-wire (MS-PW)
TDM PWE3: CESoPSN and SAToP, compression of idle timeslots ATM/IMA PWE3
ETH PWE3
IGMP SNOOPING V2
Blacklist, Broadcast packet suppression, ACL
VLAN SWAP
QoS features Hierarchical QoS scheduling and traffic shaping
DiffServ mode based on traffic classification
Simple traffic classification, complex traffic classification, per hop behavior (PHB), and ACL
Committed access rate (CAR)
PQ scheduling priority, weighted fair queuing (WFQ) and PQ+WFQ queuing Tail drop and weighted random early detection (WRED)
Eight priority queues
Shaping based on port scheduling priority
Hardware-based OAM MPLS OAM LSP/PW OAM:
FDI, BDI
CV, FFD, TraceRoute, Ping
CES PW VCCV
LM, DM
MPLS-TP OAM LSP/PW OAM:
CC, LB, LT
AIS, RDI
LM, DM
LCK, TST
CSF
Section OAM:
CC, LB
RDI
LM, DM
LCK, TST
Ethernet OAM ETH-CC(Continuity Check)、ETH-Loopback、ETH-Link Trace
Remote Loopback、Remote Fault Detection
ATM OAM
RMON(RFC 2819)
Flexible design with multiple protocols
Carrier-class protection LSP/PW Linear protection
MPLS-TP Ring protection
Anti multifailure protection based on MS-PW
Link aggregation group (LAG) protection
Multi-chassis link aggregation group (MC-LAG) protection
Dual-homing protection
LPT
STP/RSTP/MSTP
IMA protection
1+1 and 1:1 Linear MSP
Clock synchronization Two external clock inputs/outputs (2 MHz or 2 Mbit/s)
Two external time signals(1pps+TOD)
Adaptive clock recovery (ACR)
Synchronous Ethernet
IEEE 1588v2
MSTP Features
Carrier-class protection Mesh Protection and restoration(ASON)
Distributed restorable rerouting protection
5-level service dedicated protection scheme based on different SLA: Diamond, Gold, Silver, Copper and Iron services
SDH Network Protection
2/4 fiber MS-SP Ring; 1+1, 1:n (n<=14) Linear MSP; SNCP/SNCMP/SNCTP; Fiber shared virtual path protection; Fiber shared MS-SP Ring; DNI (ITU-T G.842)
Service Protection
Ethernet: RPR, RSTP, LAG/DLAG/PPS/BPS
ATM: VP-RING, PPS/BPS
Electrical Interface Protection
1:N tributary protection for E1/T1, E3/T3, E4, STM-1(e) and FE
Multi-service Transport Features Ethernet Over SDH
GFP/LAPS/VCAT/LCAS
L2 switch, 64 aggregation directions for powerful Ethernet convergence
Mapping granularity, VC-12-nv/VC-3-nv, and VC-4-nv
Point to Point LPT, Point to Multi-point LPT
MPLS and Stackable VLAN for L2 VPN
4/8-level CoS, CAR based on 64K granularity
IEEE 802.3ah, 802.1ag
RPR
Automatic topology discovery
3-level CoS , A(A0/A1) / B(B-CIR/B-EIR) / C
Steering/Wrapping/Steering + Wrapping protection scheme guarantee 50ms switching
Spatial reuse of bandwidth with fairness algorithm
Integrated MPLS with RPR to provide VLL/VPLS service
ATM
Support 2M, 34M, 155M, 622M ATM and IMA E1
support up to 93 IMA group & 189 E1s
Others
Support FC/ESCON/DVB-AS/ HD-SDI/SD-SDI
Support DDN(Nx64K) and Framed E1
Clock synchronization Two external clock inputs/outputs (2 MHz or 2 Mbit/s)
Line clock source
Tributary clock source

DOCUMENTATION CENTER NEWS ROOM CASE STUDIES VIDEO ZONE PUBLICATIONS SHARE