OptiX OSN 3500 II - Huawei Products
Under Construction!

Prompt

You have not logged in. Want to enter the login page?

Yes No

Prompt

Sorry that you are not authorized to download this document.

Apply Previous

Register an account

  • *
  • *
  • *
  • *
  • *
  • I agree that Huawei representatives may contact me.
  • I agree to receive information on Huawei products by email.
  • Terms of UsePrivacy Policy

If you already have a Huawei account, please login to download

OptiX OSN 3500 II

Offering an intelligent, next-generation solution, the OptiX OSN 3500 II optical transmission system was developed by Huawei to efficiently transmit voice and data services on a single platform. Primarily deployed at the convergence and backbone layers of the Metropolitan Area Network (MAN), the OptiX OSN 3500 II can also be networked with other Huawei equipment to optimize customer investment.


Large switching capacity

  • 120G high order, 20G low order


High integration

  • Subrack dimensions 722mm (H) x 436mm (W) x 295mm (D), 15 slots for processing boards and 20 slots for interface boards


Flexible networking capacity

  • Supports Mesh networking with plug-and-play network nodes
  • Supports dynamic increase of rate and capacity
  • Supports various networking topologies, including chain, ring, tangent rings, intersecting rings, etc
  • Supporting maximum 1 STM-64 four-fiber MSP rings, 2 STM-64 two-fiber MSP rings, 9 STM-16 four-fiber MSP rings, 12 STM-16 two-fiber MSP rings


Carrier-class protection

  • Mesh Protection and restoration(ASON)
  • Distributed restorable rerouting protection
  • 5-level service dedicated protection scheme based on different SLA: Diamond, Gold, Silver, Copper and Iron services
  • SDH Network Protection
  • 2/4 fiber MSP Ring; 1+1, 1: n Linear MSP; SNCP/SNCMP/SNCTP; Fiber shared virtual path protection; Fiber shared MSP Ring; DNI (ITU-T G.842)
  • Service Protection
  • Ethernet: RPR, RSTP
  • ATM: VP-RING/VC-RING


Highly Reliable Design

  • 1+1 hot backup for system control boards, cross-connect and synchronous timing boards
  • 1+1 hot backup for power supply modules
  • Redundancy protection for fan modules
  • TPS protection
  • 1:n tributary protection for E1/T1/E3/T3/ E4/STM-1(e)/FE


Enterprise-focused Features

  • Intelligent ASON based Mesh network can against multi-node failures, improving network reliability by 10 times
  • Single-span transmission for a distance of 270km without a Raman amplifier, fewer REGs to reduce the network construction cost and facilitate the maintenance
  • Single-fiber bidirectional optical module to solve the problem of lack of fiber resource, and built-in WDM to meet the large bandwidth requirement


Industry Certification

  • Pass EN 50121-4 Railway EMC certification.

Specifications OSN 3500II
Dimensions 722 mm (H) x 436 mm (W) x 295 mm (D)
Switch capacity 110Gbit/s (704 x 704 VC-4) higher order, 20 Gbit/s (8064 x 8064 VC-12) lower order
Service slots 15 slots for processing boards and 20 slots for interface boards
Supported interfaces MSTP interfaces STM-1/4/16/64, E1/E3/E4/T1/T3, FE/GE/10GE, DDN, IMA/ATM, FEC/EFEC,SAN, Video
WDM interfaces 40-channel DWDM interfaces, compliant with ITU-T G.694.1
8-channel CWDM interfaces, compliant with ITU-T G.694.2
Power Supply DC: -48V DC or -60V DC
AC: 220V/110V AC
Clock synchronization Line clock source
Tributary clock source
Two external clock inputs/outputs (2 MHz or 2 Mbit/s)
Auxiliary interface Orderwire interface, NNI connection interfaces
RS-232 remote maintenance interface, management serial interface, serial interfaces, 64 kbit/s codirectional data channel, 10M/100M NM interface, commissioning interface Alarm interface, Cabinet alarm indicator interface

DOCUMENTATION CENTER NEWS ROOM CASE STUDIES VIDEO ZONE PUBLICATIONS SHARE