OptiX OSN 7500 II - Huawei Products
Under Construction!

Prompt

You have not logged in. Want to enter the login page?

Yes No

Prompt

Sorry that you are not authorized to download this document.

Apply Previous

Register an account

  • *
  • *
  • *
  • *
  • *
  • I agree that Huawei representatives may contact me.
  • I agree to receive information on Huawei products by email.
  • Terms of UsePrivacy Policy

If you already have a Huawei account, please login to download

OptiX OSN 7500 II

To meet the growing demands of Metropolitan Area Networks (MANs), Huawei has developed the OptiX OSN 7500 II — next-generation Optical Core Switches (OCS). Primarily used as service scheduling nodes at the metropolitan backbone layer, the OptiX OSN 7500 II incorporates an intelligent optical transmission platform and core optical transmission system to schedule and transmit services of different types and granularities. Leveraging "universal switching" architecture, the OptiX OSN 7500 II can be used in packet or Time Division Multiplexing (TDM) mode. Combined with other Huawei equipment, the OptiX OSN 7500 II supports various networking applications, such as pure packet domain, hybrid networking (packet and TDM domain overlay networking), and pure TDM domain. An effective networking solution can optimize both data and conventional Synchronous Digital Hierarchy (SDH) service processing.


Multiservice Universal Switch and Smart Transport

  • Smart transport based on universal switch and smart line card for all types of services in any possible mix, including Ethernet, ATM, TDM, and future services.
  • Universal switch at any level of packet and TDM in their original format, high efficiency and best performance, ‘0’ waste of bandwidth.
  • Smart line card for packet and TDM multiservice universal transport in one port, carefree evolution among different types of services, ‘0’ waste of investment.


PID inside for Tailored Metro Ultra Broadband Transport

  • Integrating OTU, MUX and DEMUX boards by a PID chip, providing 40G/100G capacity per port and larger in future.
  • SDH-like OAM without complicated photonic layer design such as wavelength planning and OSNR calculating, with fewer patch cords and fiber operations, greatly reducing time to market.
  • 50% footprint saving and 40% power consumption reduction.


Soft Pipe & Hard Pipe for Highly Reliable and Efficient Transport

  • SDH hard pipe for TDM services with high quality and low delay to ensure reliable transmission for production and dispatching services and private services
  • MPLS-TP based soft pipe supports packet statistical multiplexing to provide highly efficient transmission for large bandwidth packet services
  • Universal switch based soft and hard pipes consider both legacy TDM service and future-oriented IP service to achieve smooth evolution for transmission network


TP-Assist for Easy OAM

  • MPLS-TP based OAM solution “TP-Assist” provides efficient planning, fast deployment and easy maintenance, making the large-scale packet network easily manageable
  • Traffic based crystal clear OAM is supported with visual network-level view, graphical format to display end-to-end service configuration, performance and status.
  • Better maintenance experience even than SDH: visualized end-to-end bandwidth management, intelligent location of 92% failures, analyzable and predicable network management.


Industry Certification

  • Pass EN 50121-4 Railway EMC certification.

OptiX OSN 7500 II Product Specifications

System Features
Subrack dimensions 800 mm (H) x 496 mm (W) x 295 mm (D)
Switching capacity Packet: 320 Gbit/s and TDM: 360 Gbit/s (higher order), 40 Gbit/s (lower order)
Service slots 16 slots for processing boards and 16 slots for interface boards
Highly reliable design 1+1 hot backup for power supply modules, system control boards, cross-connect and synchronous timing boards
Redundancy protection for fan modules
Supported interfaces 40G interfaces OTU3/40GE, compliant with OTL3.4 standard
Packet transport interfaces E1, ch STM-1, ATM STM-1, FE/GE/10GE
MSTP interfaces STM-1/4/16/64, E1/E3/E4/T1/T3, FE/GE/10GE, FEC/EFEC interface
WDM interfaces 40-channel DWDM interfaces, compliant with ITU-T G.694.1
8-channel CWDM interfaces, compliant with ITU-T G.694.2
Networking Mode Supports pure packet,hybrid (packet + SDH) or SDH networking Supports WDM networking
Supports single-fiber bidirectional transmission
Power Supply -38.4~ -72V DC
Operation Environment Temperature Relative Humidity
Long term: 0°C ~ 45°C 10% ~ 90%
Short term: -5°C ~ 55°C 5% ~ 95%
Packet Transport Features
Service features E-Line and E-LAN
QinQ
MPLS-TP based VPWS and VPLS
Multi-section pseudo-wire (MS-PW)
TDM PWE3: CESoPSN and SAToP, compression of idle timeslots
ATM/IMA PWE3
ETH PWE3
IGMP SNOOPING V2
Blacklist, Broadcast packet suppression, ACL
VLAN SWAP
QoS features Hierarchical QoS scheduling and traffic shaping
DiffServ mode based on traffic classification
Simple traffic classification, complex traffic classification, per hop behavior (PHB), and ACL
Committed access rate (CAR)
PQ scheduling priority, weighted fair queuing (WFQ) and PQ+WFQ queuing
Tail drop and weighted random early detection (WRED)
Eight priority queues
Shaping based on port scheduling priority
Hardware-based OAM MPLS OAM LSP/PW OAM:
FDI, BDI
CV, FFD, TraceRoute, Ping
CES PW VCCV
LM, DM
MPLS-TP OAM LSP/PW OAM:
CC, LB, LT
AIS, RDI
LM, DM
LCK, TST
CSF
Section OAM:
CC, LB
RDI
LM, DM
LCK, TST
Ethernet OAM ETH-CC(Continuity Check)、ETH-Loopback、ETH-Link Trace
Remote Loopback、Remote Fault Detection
ATM OAM
RMON(RFC 2819)
Flexible design with multiple protocols
Carrier-class protection LSP/PW Linear protection
MPLS-TP Ring protection
Anti multifailure protection based on MS-PW
Link aggregation group (LAG) protection
Multi-chassis link aggregation group (MC-LAG) protection
Dual-homing protection
LPT
STP/RSTP/MSTP
IMA protection
1+1 and 1:1 Linear MSP
Clock synchronization Two external clock inputs/outputs (2 MHz or 2 Mbit/s)
Two external time signals(1pps+TOD)
Adaptive clock recovery (ACR)
Synchronous Ethernet
IEEE 1588v2
MSTP Features
Carrier-class protection Mesh Protection and restoration(ASON)
Distributed restorable rerouting protection
5-level service dedicated protection scheme based on different SLA: Diamond, Gold, Silver, Copper and Iron services
SDH Network Protection
2/4 fiber MS-SP Ring; 1+1, 1:n (n<=14) Linear MSP; SNCP/SNCTP; Fiber shared virtual path protection; Fiber shared MS-SP Ring; DNI (ITU-T G.842) Service Protection Ethernet: RPR, ERPS, RSTP, LAG/DLAG/PPS/BPS Electrical Interface Protection
1:N tributary protection for E1/T1, E3/T3, E4, STM-1(e) and FE
Multi-service Transport Features Ethernet Over SDH
GFP/LAPS/VCAT/LCAS
L2 switch, 64 aggregation directions for powerful Ethernet convergence
Mapping granularity, VC-12-nv/VC-3-nv, and VC-4-nv
Point to Point LPT, Point to Multi-point LPT
MPLS and Stackable VLAN for L2 VPN
4/8-level CoS, CAR based on 64K granularity
IEEE 802.3ah, 802.1ag
Clock synchronization Two external clock inputs/outputs (2 MHz or 2 Mbit/s)
Line clock source
Tributary clock source

DOCUMENTATION CENTER NEWS ROOM CASE STUDIES VIDEO ZONE PUBLICATIONS SHARE