S5700 Series Gigabit Enterprise Switches - Huawei Products
Under Construction!

Prompt

You have not logged in. Want to enter the login page?

Yes No

Prompt

Sorry that you are not authorized to download this document.

Apply Previous

Register an account

  • *
  • *
  • *
  • *
  • *
  • I agree that Huawei representatives may contact me.
  • I agree to receive information on Huawei products by email.
  • Terms of UsePrivacy Policy

If you already have a Huawei account, please login to download

S5700 Series Gigabit Enterprise Switches

The S5700 series gigabit enterprise switches (S5700 for short) are next-generation energy-saving switches developed by Huawei to meet the demand for high-bandwidth access and Ethernet multi-service aggregation. Based on cutting-edge hardware and Huawei Versatile Routing Platform (VRP) software, the S5700 provides a large switching capacity and high-density GE ports to accommodate 10 Gbit/s upstream transmissions. The S5700 can be used in various enterprise network scenarios. For example, it can function as an access or aggregation switch on a campus network, a gigabit access switch in an Internet data center (IDC), or a desktop switch to provide 1000 Mbit/s access for terminals.

●Dual power slot
●Intelligent stacking(iStack), supporting a maximum of 9 switches in a stack
●Hardware BFD, hardware Ethernet OAM
●Netstream
●Energy-Efficient Ethernet(EEE)

It is available in a limited version (LI), a standard version (SI), an enhanced version (EI), and an advanced version (HI).


Powerful support for services

The S5700 supports IGMP v1/v2/v3 snooping, IGMP filter, IGMP fast leave, and IGMP proxy. The S5700 supports wire-speed replication of multicast packets between VLANs, multicast load balancing among member interfaces of a trunk, and controllable multicast, meeting requirements for IPTV and other multicast services.


The S5700 provides the Multi-VPN-Instance CE (MCE) function to isolate users in different VLANs, ensuring data security and reducing costs.


S5700-HI switches are cost-effective case-shaped MPLS switches. They support MPLS, VPLS and VLL functions and can be used as high-quality access devices to provide leased line services for enterprises.



Comprehensive reliability mechanisms

Besides STP, RSTP, and MSTP, the S5700 supports enhanced Ethernet reliability technologies, such as Smart Link and RRPP (Rapid Ring Protection Protocol), which implement millisecond-level protection switchover and ensure network reliability. The S5700 also provides Smart Link multi-instance and RRPP multi-instance to implement load balancing among links, optimizing bandwidth usage.


The S5700 supports enhanced trunk (E-Trunk), which enables a CE to be dual-homed to two PEs (S5700s). E-Trunk greatly enhances link reliability and implements link aggregation between devices, which improves reliability of access devices.


The S5700 supports the Smart Ethernet Protection (SEP) protocol, a ring network protocol applied to the link layer on an Ethernet network. SEP can be used on open ring networks and can be deployed on upper-layer aggregation devices to provide fast switchover (within 50 ms), ensuring continuous transmission of services. SEP features simplicity, high reliability, fast switchover, easy maintenance, and flexible topology, facilitating network planning and management.


The S5700 supports Ethernet Ring Protection Switching (ERPS), also referred to as G.8032. As the latest ring network protocol, ERPS was developed based on traditional Ethernet MAC and bridging functions and uses mature Ethernet OAM function and a Ring Automatic Protection Switching (R-APS) mechanism to implement millisecond-level protection switching. ERPS supports various services and allows flexible networking, helping customers build a network with lower OPEX and CAPEX.


The S5700 supports redundant power supplies and simultaneous use of AC and DC power. Users can choose either one or two power supplies to ensure device reliability.


The S5700-EI supports VRRP, and can set up VRRP groups with other Layer 3 switches. VRRP provides redundant routes to ensure stable and reliable communication. Multiple equal-cost routes to an uplink device can be configured on the S5700 to provide route redundancy. When an active route is unreachable, traffic is switched to a backup route.


The S5700 supports BFD, which improves network reliability by providing millisecond-level fault detection for protocols such as OSPF, IS-IS, VRRP, and PIM. Complying with IEEE 802.3ah and 802.1ag, the S5700 supports point-to-point Ethernet fault management and can detect faults within the last mile of an Ethernet link to users.


The S5700-HI provides 3.3 millisecond hardware-based Ethernet OAM function and Y.1731, which can quickly detect and locate faults. Using the Ethernet OAM and switchover technologies, the S5700 can provide millisecond-level protective switchovers for networks.



Well-designed QoS policies and security mechanisms

The S5700 implements complex traffic classification based on packet information, such as the 5-tuple, IP precedence, ToS, DSCP, IP protocol type, ICMP type, TCP/UDP port number, VLAN ID, Ethernet protocol type. ACLs can be applied to inbound or outbound directions on an interface. The S5700 supports a flow-based two-rate three-color CAR. Each port supports eight priority queues and multiple queue scheduling algorithms, such as WRR, DRR, SP, WRR+SP, and DRR+SP. All of these ensure the quality of voice, video, and data services.


The S5700 provides multiple security measures to defend against Denial of Service (DoS) attacks, as well as attacks against networks or users. DoS attack types include SYN Flood attacks, Land attacks, Smurf attacks, and ICMP Flood attacks. Attacks to networks refer to STP BPDU/root attacks. Attacks to users include bogus DHCP server attacks, man-in-the-middle attacks, IP/MAC spoofing attacks, and DHCP request flood attacks. DoS attacks that change the CHADDR field in DHCP packets are also attacks against users.


The S5700 supports DHCP snooping, which discards invalid packets that do not match any binding entries, such as ARP spoofing packets and IP spoofing packets. This prevents man-in-the-middle attacks to campus networks that hackers initiate by using ARP packets. The interface connected to a DHCP server can be configured as a trusted interface to protect the system against bogus DHCP server attacks.


The S5700 supports strict ARP learning, which prevents ARP spoofing attacks that exhaust ARP entries. It also provides IP source checks to prevent DoS attacks caused by MAC address spoofing, IP address spoofing, and MAC/IP spoofing.


The S5700 supports centralized MAC address authentication, 802.1x authentication, and NAC. It authenticates users based on statically or dynamically bound user information, such as the user name, IP address, MAC address, VLAN ID, access interface, and flag indicating whether antivirus software is installed. VLANs, QoS policies, and ACLs can be dynamically applied to users.


The S5700 can limit the number of MAC addresses learned on an interface to prevent attackers from exhausting MAC address entries by using bogus source MAC addresses. This function minimizes the packet flooding that occurs when users' MAC addresses cannot be found in the MAC address table.



Fine-grained traffic management

The S5700 supports NetStream. The NetStream module supports V5, V8, and V9 packet formats and provides various traffic analysis functions, such as real-time traffic sampling, dynamic report generation, traffic attribute analysis, and traffic exception report. The Netstream module enables administrators to monitor network status in real time and provides applications and analysis functions including potential fault detection, effective fault rectification, fast problem handling, and security monitoring, to help customers optimize network structure and adjust resource deployment.


The S5700 supports the Sampled Flow (sFlow) function, which uses a sampling mechanism to obtain statistics about traffic forwarded on a network and sends the statistics to the Collector in real time. The Collector analyzes traffic statistics to help customers manage network traffic efficiently. The S5700-EI integrates the sFlow Agent module and uses hardware for traffic monitoring. Unlike traffic monitoring through port mirroring, sFlow does not degrade network performance during traffic monitoring.



Maintenance-free design and manageability

The S5700 supports Easy Operation maintenance solutions, such as automatic configuration, plug-and-play features, deployment using a USB flash drive, and batch remote upgrades. These capabilities simplify device management and maintenance and reduce maintenance costs. The S5700 supports SNMP v1/v2/v3 and provides flexible methods for managing devices. Users can manage the S5700 using the CLI, Web NMS, Telnet, and HGMP. The NQA function assists users with network planning and upgrades. In addition, the S5700 supports NTP, SSH v2, HWTACACS, RMON, log hosts, and port-based traffic statistics.


The S5700 supports GARP VLAN Registration Protocol (GVRP), which dynamically distributes, registers, and propagates VLAN attributes to reduce manual configuration workloads of network administrators and ensure correct VLAN configuration. In a complex network topology, GVRP simplifies VLAN configuration and reduces network communication faults caused by incorrect VLAN configuration.


The S5700 supports MUX VLAN. MUX VLAN isolates the Layer 2 traffic between interfaces in a VLAN. Interfaces in a subordinate separate VLAN can communicate with ports in the principal VLAN, but cannot communicate with each other. MUX VLAN is typically used on an enterprise intranet to isolate user interfaces from each other while still allowing them to communicate with server interfaces. This function prevents communication between network devices connected to certain interfaces or interface groups, but allows these devices to communicate with the default gateway.



PoE function

The S5700 PWR provides improved PoE solutions. It can use PoE power supplies with different power levels to provide -48 V DC power for Powered Devices (PDs), such as IP phones, WLAN APs, and Bluetooth APs. As a Power Sourcing Equipment (PSE), the S5700 PWR complies with IEEE 802.3af and 802.3at (PoE+) and can work with PDs that are incompatible with 802.3af or 802.3at. Each port provides a maximum of 30 W of power, complying with IEEE 802.3at. The PoE+ function increases the maximum power available on each port and implements intelligent power management for high-power consumption applications. This facilitates the ease of PD use. PoE ports continue to work while in power-saving mode. Users can configure whether and when a PoE port supplies power.



High scalability

The S5700 supports intelligent stacking (iStack). Multiple S5700s can be connected with stack cables to set up a stack, which functions as a virtual switch. A stack consists of a master switch, a backup switch, and several slave switches. The backup switch takes over services when the master switch fails, reducing service interruption time. Stacks support intelligent upgrades so that users do not need to change the software version of a switch when adding it to a stack. The iStack function allows users to connect multiple switches with stack cables to expand the system capacity. These switches can be managed using a single IP address, which greatly reduces the costs of system expansion, operation, and maintenance. Compared with traditional networking technologies, iStack has distinct advantages regarding scalability, reliability, and system architecture.



Various IPv6 features

The S5700 supports IPv4/IPv6 dual stack and can migrate from an IPv4 network to an IPv6 network. S5700 hardware supports IPv4/IPv6 dual stack, IPv6 over IPv4 tunnels (including manual tunnels, 6to4 tunnels, and ISATAP tunnels), and Layer 3 line-speed forwarding. The S5700 can be deployed on IPv4 networks, IPv6 networks, or networks that run both IPv4 and IPv6. This makes networking flexible and enables easy migration from IPv4 to IPv6.


Innovative energy saving design

The S5700-LI offer customers extensive selection of energy-saving with standard mode, basic mode and advanced mode that accommodates most needs. By matching port link down/up, optical-module in-place/out of place, port shut down/undo shutdown, idle/busy period to increase the proportion of the dynamic energy-saving to reduce the power consumption.


The S5700-LI/SS5710-EI/S5700-HI innovatively use Energy Efficient Ethernet (EEE), port energy detection, CPU variable-frequency and device hibernate technology, greatly reducing energy consumption and noise without compromising performance and stability.



Innovative built-in battery

The S5700-LI-BAT is the industry's first switch model that supports internal lithium batteries as a backup power supply. It ensures uninterrupted services in situations where power failures frequently occur at the access layer. The S5700-LI-BAT has the following advantages:


  • In the event of a mains power failure the battery can power the switch, so services will not be interrupted.
  • Compared with switches using external power supply units, the S5700-LI-BAT occupies less space and is easier to install.
  • Intelligent power management, long standby time
  • Battery LAN switches on the entire network can be managed centrally using a web system, facilitating network operation and maintenance. As the battery lifetime is predictable, you do not need to replace batteries periodically, reducing hardware costs.
  • The internal battery provides alarm and voltage/current protection functions as well as overtemperature protection, which enhance reliability.


CSFP providing high-density access and increased bandwidth

CSFP switches support downlink CSFP ports. Each downlink CSFP port equipped with a CSFP GE optical module and one pair of fibers can provide 2 Gbit/s bandwidth bidirectionally, which is two times the bandwidth of standard SFP optical modules. The 24 downlink CSFP ports can provide 48 Gbit/s bandwidth bidirectionally, implementing high-density access (equal to access of 48 standard SFP ports) and saving the cost of deploying fibers and adding optical modules.



Easy O&M with front panel

The models with front power sockets can be installed in a 300 mm deep cabinet, and can be maintained through the front panel. This simplifies operation and maintenance. The cabinets can be placed against the wall or back to back, and is well-suited for shallow cabinets and limited equipment room space.


Item S5700(S)-LI/S5710-LI* S5700-SI*

S5700-EI/S5710-EI/S5720-EI*

S5700-HI/S5710-HI/S5720-HI*
Fixed port LI S5700-10P-LI-AC/S5700-10P-PWR-LI-AC: 8 × 10/100/1000Base-T,2 × 1000Base-X SFP
S5700(S)-28P-LI/S5700-28P-PWR-LI/ S5700-28P-LI-BAT/S5700-28P-LI-4AH: 24 × 10/100/1000Base-T, 4 × 1000Base-X SFP
S5700-28P-LI-24S-BAT/S5700-28P-LI-24S-4AH: 28 × 1000Base-X,4 of which are dual-purpose 10/100/1000 or SFP,4 × 1000Base-X
S5700-28TP-LI-AC/S5700-28TP-PWR-LI-AC/S5701-28TP-PWR-LI-AC:24× 10/100/1000Base-T, 2×1000Base-X SFP and 2 dual-purpose 10/100/1000 or SFP
S5700-28X-LI/S5700-28X-PWR-LI-AC/ S5701-28X-LI-AC: 24 × 10/100/1000Base-T, 4 × 10GE SFP+
S5700-28X-LI-24S-AC/S5700-28X-LI-24S-DC/ S5701-28X-LI-24S-AC: 28x1000Base-X,4 of which are dual-purpose 10/100/1000 or SFP,4 × 10GE SFP+
S5700(S)-52P-LI/S5700-52P-PWR-LI: 48 × 10/100/1000Base-T, 4 × 1000Base-X SFP
S5700-52X-LI/S5700-52X-PWR-LI-AC: 48 × 10/100/1000Base-T, 4 × 10GE SFP+
S5700-52X-LI-48CS-AC:48x1000Base-X(CSFP) or 24 × 1000Base-X, 4 of which are dual-purpose 10/100/1000 or Base-X(CSFP), 4 × 10GE SFP+
SI S5700-24TP-SI/S5700-24TP-PWR-SI/S5700-28C-SI/S5700-28C-PWR-SI:24 × 10/100/1000Base-T, 4 of which are dual-purpose 10/100/1000 or SFP
S5700-26X-SI-12S-AC: 12 × 10/100/1000BASE-T,12×100/1000Base-X,2 × 10GE SFP+
S5700-48TP-SI/S5700-48TP-PWR-SI: 48 × 10/100/1000Base-T, 4 of which are dual-purpose 10/100/1000 or SFP
S5700-52C-SI/S5700-52C-PWR-SI: 48 × 10/100/1000Base-T
EI S5700-28C-EI/S5700-28C-PWR-EI: 24 × 10/100/1000Base-T
S5700-52C-EI/S5700-52C-PWR-EI: 48 × 10/100/1000Base-T
S5700-28C-EI-24S: 20 × 100/1000Base-X, 4 × GE Combo
S5710-28C-EI/S5710-28C-PWR-EI-AC: 20 x 10/100/1000Base-T, 4 × GE Combo, 4 × 10GE SFP+
S5710-52C-EI/S5710-52C-PWR-EI/S5710-52C-PWR-EI-AC: 48 x 10/100/1000Base-T, 4 × 10GE SFP+
S5720-32P-EI-AC: 24×10/100/1000Base-T, 4×100/1000Base-X SFP, 4 Gig SFP
S5720-52P-EI-AC:48×10/100/1000Base-T, 4 Gig SFP
S5720-36C-EI-AC/ S5720-36C-PWR-EI-AC: 28×10/100/1000Base-T(4GE Combo SFP), 4×10 GE SFP+

S5720-36C-EI-28S-AC: 28×100/1000Base-X SFP(4GE Combo), 4×10GE SFP+

S5720-36PC-EI-AC: 28×10/100/1000Base-T(4GE Combo SFP), 4 Gig SFP

S5720-56C-EI-AC/ S5720-56C-PWR-EI-AC:48×10/100/1000Base-T, 4×10GE SFP+

S5720-56C-EI-48S-AC: 48×100/1000Base-X SFP, 4×10GE SFP+

S5720-56PC-EI-AC: 48×10/100/1000Base-T, 4 Gig SFP

S5720-32X-EI-AC: 24×10/100/1000 Base-T, 4×100/1000Base-X SFP, 4×10 GE SFP+

S5720-32X-EI-24S-AC: 24×100/1000Base-X SFP, 4×10/100/1000Base-T, 4×10GE SFP+

S5720-50X-EI-AC : 46 ×10/100/1000Base-T, 4×10GE SFP+

S5720-50X-EI-46S-AC: 46 ×100/1000Base-X SFP, 4×10GE SFP+

S5720-52X-EI-AC: 48×10/100/1000Base-T, 4×10GE SFP+

HI S5700-28C-HI: 24 × 10/100/1000Base-T
S5700-28C-HI-24S: 24 × 100/1000Base-X
S5710-108C-PWR-HI: 48 × 10/100/1000BASE-T, 8 × 10GE SFP+
S5720-32C-HI-24S-AC:24×100/1000Base-X ,8 of which are dual-purpose 10/100/1000 or SFP, 4×10GE SFP+
S5720-56C-HI-AC/S5720-56C-PWR-HI-AC:48×10/100/1000Base-T, 4×10GE SFP+
Extended slot The S5700TP provides an extended slot for a stack card
S5700C Provide two extended slots, one for an uplink subcard and the other for a stack card.
S5710C Provide two extended slots for uplink subcards.
S5700-HI provides an extended slot for an uplink subcard
S5710-108C-PWR-HI: Three front extended slots and one rear extended slot
MAC address table IEEE 802.1d compliance
MAC address learning and aging
Static, dynamic, and blackhole MAC address entries
Packet filtering based on source MAC addresses

MAC address entries:
S5700S-LI series: 8K, S5700-LI/S5700-SI series: 16K, S5700-EI series: 32K, S5720-EI series: 64K, S5700-HI series: S5700-HI: 32K, S5710-HI: 456K, S5720-HI: 128K

VLAN 4K VLANs
Guest VLAN and voice VLAN
GVRP
MUX VLAN
VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports
1:1 and N:1 VLAN Mapping
SuperVLAN(supported by the S5700-SI/S5700-EI/S5700-HI series)





Ring protection
RRPP ring topology and RRPP multi-instance
Smart Link tree topology and Smart Link multi-instance, providing millisecond-level protection switchover
SEP
ERPS(G.8032)(supported by the S5700-LI/S5700-SI/S5700-EI/S5700-HI series)
STP(IEEE 802.1d),RSTP(IEEE 802.1w),and MSTP(IEEE 802.1s)
BPDU protection, root protection, and loop protection
BPDU Tunnel
Reliability Ethernet OAM (IEEE 802.3ah and 802.1ag)
ITU-Y.1731
DLDP
LACP
E-Trunk(supported by S5700-SI/S5700-EI/S5700-HI series)
BFD for OSPF, BFD for IS-IS, BFD for VRRP, and BFD for PIM(supported by the S5700-EI/S5700-HI series)
MPLS features MPLS L3VPN
MPLS L2VPN(VPWS/VPLS)
MPLS-TE
MPLS QoS
Notes: supported by S5710-EI, S5700-HI and S5710-HI
IP routing Static route
RIP V1/2, RIPng, ECMP (supported by the S5700-SI/S5700-EI/S5700-HI series)
OSPF, OSPFv3, IS-IS, IS-ISv6, BGP, BGP4+(supported by the S5700-EI/S5700-HI series)
IPv6 features Neighbor Discovery (ND)
Path MTU (PMTU)
IPv6 ping, IPv6 tracert, and IPv6 Telnet
ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type
MLD v1/v2 snooping
6to4 tunnel, ISATAP tunnel, and manually configured tunnel (supported by the S5700-SI/S5700-EI/S5700-HI series)
Multicast IGMP v1/v2/v3 snooping and IGMP fast leave
Multicast forwarding in a VLAN and multicast replication between VLANs
Multicast load balancing among member ports of a trunk
Controllable multicast
Port-based multicast traffic statistics
IGMP v1/v2/v3, PIM-SM, PIM-DM, PIM-SSM, MSDP (supported by the S5700-EI/S5700-HI series)
QoS/ACL Rate limiting on packets sent and received by an interface
Packet redirection
Port-based traffic policing and two-rate three-color CAR
Eight queues on each port
WRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithms
WRED (supported by the S5710-EI and S5700-HI)
Re-marking of the 802.1p priority and DSCP priority
Packet filtering at Layers 2 through 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN ID
Rate limiting in each queue and traffic shaping on ports
Security User privilege management and password protection
DoS attack defense, ARP attack defense, and ICMP attack defense
Binding of the IP address, MAC address, interface, and VLAN
Port isolation, port security, and sticky MAC
MAC Forced Forwarding (MFF)
Blackhole MAC address entries
Limit on the number of learned MAC addresses
802.1x authentication and limit on the number of users on an interface
AAA authentication, RADIUS authentication, HWTACACS authentication, and NAC
SSH v2.0
Hypertext Transfer Protocol Secure (HTTPS)
CPU defense
Blacklist and whitelist
Access Security DHCP Relay, DHCP Server, DHCP Snooping, DHCP Security
Management and maintenance Virtual cable test
Port mirroring and RSPAN (remote port mirroring)
Remote configuration and maintenance using Telnet
SNMP v1/v2c/v3
RMON
Web NMS
HGMP
System logs and alarms of different levels
802.3az EEE (supported by the S5700(S)-LI, S5710-EI, S5700-HI and S5710-HI)
Dying gasp (supported by the S5700-HI, S5710-HI and S5700(S)-LI(except battery LAN switches)
NetStream (supported by the S5710-EI, S5700-HI and S5710-HI)
sFlow (supported by the S5700(S)-LI/S5700-EI/S5700-HI series)
Interoperability Supports VBST (Compatible with PVST/PVST+/RPVST)
Supports LNP (Similar to DTP)
Supports VCMP (Similar to VTP)
Operating environment Operating temperature: 0℃–50℃
Relative humidity: 10%–90% (non-condensing)
Input voltage AC:
Rated voltage range: 100 V to 240 V AC, 50/60 Hz
Maximum voltage range: 90 V to 264 V AC, 47/63 Hz
DC:
Rated voltage range: –48 V to –60 V, DC
Maximum voltage range: –36 V to –72 V DC
Note: PoE-support switches do not use DC power supplies.
Dimensions (W x D x H) S5700-10P-LI-AC:250 x 180 x 43.6 mm
S5700-10P-PWR-LI-AC:320 x 220 x 43.6 mm
S5700-28P-LI/S5700-28TP-LI-AC/S5700-28X-LI/S5700-28X-LI-24S/S5700-24TP-SI/S5700-28C-HI/S5700-28C-HI-24S/ S5701-28X-LI-AC/ S5701-28X-LI-24S-AC/ S5700-52X-LI-48CS-AC: 442 x 220 x 43.6 mm
S5700-28P-PWR-LI/S5700-28TP-PWR-LI-AC/S5701-28TP-PWR-LI-AC/S5700-52P-LI/S5700-52P-PWR-LI/S5700-28X-PWR-LI-AC/S5700-52X-LI/S5700-52X-PWR-LI-AC/ S5700-26X-SI-12S-AC/S5700-28P-LI-BAT/S5700-28P-LI-4AH/S5700-28P-LI-24S-BAT/S5700-28P-LI-24S-4AH: 442 x 310 x 43.6 mm
S5710-108C-PWR-HI: 442x470.0x87.2
Others: 442 x 420 x 43.6 mm
Power consumption S5700-10P-LI-AC<11.5W
S5700-10P-PWR-LI-AC<139W
S5700-28P-LI<25W S5700-24TP-SI<40W S5700-28C-EI<60W S5700-28C-HI<76W
S5700S-28P-LI<25W S5700-26X-SI-12S-AC<42.3W S5700-28C-EI-24S<63W S5700-28C-HI-24S<80W
S5700-28TP-LI-AC<26.4W S5700-48TP-SI<64W S5700-52C-EI<88W S5710-108C-PWR-HI<1680W (PoE:1440W)
S5700-28TP-PWR-LI-AC<469.7W(PoE:369.6W) S5700-28C-SI<56W S5710-28C-EI<100W
S5701-28TP-PWR-LI-AC<238.7W(PoE:184.8W) S5700-52C-SI<78W S5710-52C-EI<165W S5720-32C-HI-24S-AC<172.7W
S5700-52P-LI<52W S5700-24TP-PWR-SI<455W(PoE: 370W) S5700-28C-PWR-EI<842W (PoE: 740W) S5720-56C-HI-AC<183.3W
S5700S-52P-LI<52W S5700-48TP-PWR-SI<907W (PoE: 740W)

S5720-56C-PWR-HI-AC:
without PD: <188.74W,
with PD: <1739W(device:
299W, PD: 1440W)

S5700-52C-PWR-EI<930W (PoE: 740W)  
S5700-28P-PWR-LI<765W (PoE: 740W)    
S5710-28C-PWR-EI-AC<942W  
  S5710-52C-PWR-EI/S5710-52C-PWR-EI-AC: < 1043W with two 580W AC supplies(PoE:740W), or <1625W with two 1150W AC supplies(PoE:1440W)  
S5710-28C-PWR-LI<836W (PoE: 740W)   S5720-32P-EI-AC <50.7W  
  S5720-52P-EI-AC <60.3W  
S5700-52P-PWR-LI<792W (PoE: 740W)   S5720-36C-EI-AC <75.8W  
  S5720-36C-PWR-EI-AC :
without PD: <78W,
with PD:<864.3W(PoE:740W)
 
S5710-52C-PWR-LI<917W (PoE: 740W)   S5720-36PC-EI-AC<74.6W  
  S5720-36C-EI-28S-AC<83.9W  
S5700-28X-LI<42W   S5720-56C-EI-AC<86.9W  
S5700-28X-LI-24S<54W   S5720-56C-PWR-EI-AC:
without PD: <91.6W,
with PD:<889.4W(PoE:740W)
 
S5700-28X-PWR-LI-AC <420W   S5720-56C-PWR-EI-AC1:
without PD: <91.6W,
with PD:<1564.8W(PoE:1440W) 
 
S5700-52X-LI<61W   S5720-56PC-EI-AC<85.7W  
S5700-52X-PWR-LI-AC <440   S5720-56C-EI-48S-AC<104W   
S5700-28P-LI-BAT/S5700-28P-LI-4AH<23W   S5720-32X-EI-AC <51.9W  
S5700-28P-LI-24S-BAT/S5700-28P-LI-24S-4AH<34.1W   S5720-32X-EI-24S-AC<58.9W   
S5700-52X-LI-48CS-AC<79.9W   S5720-50X-EI-AC<55.3W   
S5701-28X-LI-AC <39.5W   S5720-50X-EI-46S-AC<81.5W  
S5701-28X-LI-24S-AC<60W   S5720-52X-EI-AC <61.5W  


  • The product information may contain the product functions provided in future. For the actual product specifications, contact Huawei local sales office.

S5700-LI

Product Description
S5700-10P-LI-AC(8 Ethernet 10/100/1000 ports,2 Gig SFP,AC 110/220V)
S5700-28P-LI-AC(24 Ethernet 10/100/1000 ports,4 Gig SFP,AC 110/220V)
S5700-28P-LI-DC(24 Ethernet 10/100/1000 ports,4 Gig SFP,DC -48V)
S5700-28X-LI-AC(24 Ethernet 10/100/1000 ports,4 10 Gig SFP+,AC 110/220V)
S5700-28X-LI-DC(24 Ethernet 10/100/1000 ports,4 10 Gig SFP+,DC -48V)
S5700-28X-LI-24S-AC(24 Gig SFP,4 of which are dual-purpose 10/100/1000 or SFP,4 10 Gig SFP+,AC 110/220V)
S5700-28X-LI-24S-DC(24 Gig SFP,4 of which are dual-purpose 10/100/1000 or SFP,4 10 Gig SFP+,DC -48V)
S5700-28P-LI-BAT (24 10/100/1000Base-T Ethernet ports, 4 GE SFP ports, 1 battery slot, AC power supply)
S5700-28P-LI-4AH (24 10/100/1000Base-T Ethernet ports, 4 GE SFP ports, 1 4AH lithium battery, AC power supply)
S5700-28P-LI-24S-BAT (28 GE SFP ports, 4 Combo 10/100/1000Base-T Ethernet ports, 1battery slot, AC power supply)
S5700-28P-LI-24S-4AH (28 GE SFP ports, 4 Combo 10/100/1000Base-T Ethernet ports, 1 4AH lithium battery, AC power supply)
S5700-52X-LI-48CS-AC (48 GE CSFP ports or 24 GE SFP ports, four Combo 10/100/1000Base-T Ethernet ports, four 10GE SFP+ ports, AC power supply, front power sockets, front access)
S5701-28X-LI-AC (24 10/100/1000Base-T Ethernet ports, 4 10GE SFP+ ports, AC power supply, front power sockets, front access)
S5701-28X-LI-24S-AC (24 GE SFP ports, four Combo 10/100/1000Base-T Ethernet ports, four 10GE SFP+ ports, AC power supply, front power sockets, front access)

S5700-28TP-LI-AC(24 Ethernet 10/100/1000ports,2 Gig SFP and 2 dual-purpose 10/100/1000 or SFP,AC 110/220V)

S5700-28TP-PWR-LI-AC(24 Ethernet 10/100/1000 PoE+ ports,2 Gig SFP and 2 dual-purpose 10/100/1000 or SFP,AC 110/220V)

S5701-28TP-PWR-LI-AC(12 Ethernet 10/100/1000 PoE+ ports,12 Ethernet 10/100/1000 ports,2 Gig SFP and 2 dual-purpose 10/100/1000 or SFP,AC)

S5700-52P-LI-AC(48 Ethernet 10/100/1000 ports,4 Gig SFP,AC 110/220V)
S5700-52P-LI-DC(48 Ethernet 10/100/1000 ports,4 Gig SFP,DC -48V)
S5700-52X-LI-AC(48 Ethernet 10/100/1000 ports,4 10 Gig SFP+,AC 110/220V)
S5700-52X-LI-DC(48 Ethernet 10/100/1000 ports,4 10 Gig SFP+,DC -48V)
S5700-10P-PWR-LI-AC(8 Ethernet 10/100/1000 PoE+ ports,2 Gig SFP,AC 110/220V)
S5700-28X-PWR-LI-AC(24 Ethernet 10/100/1000 POE+ ports,4 10 Gig SFP+,AC 110/220V)
S5700-28P-PWR-LI-AC(24 Ethernet 10/100/1000 PoE+ ports,4 Gig SFP,AC 110/220V)
S5700-52X-PWR-LI-AC(48 Ethernet 10/100/1000 PoE+ ports,4 10 Gig SFP+,AC 110/220V)
S5700-52P-PWR-LI-AC(48 Ethernet 10/100/1000 PoE+ ports,4 Gig SFP,AC 110/220V)
2-Port 10GE SFP+ Optical Interface Card
4-Port 10GE SFP+ Optical Interface Card (Including 4-Port 10GE SFP+ Optical Interface Card,Extend Channel Card)
Ethernet Stack Interface Card(Including Stack Card,100cm Stack Cable)
100/1000BASE-BIDI CSFP single-fiber bidirectional optical module-CSFP-GE/FE-single-mode optical module (Tx1490/Rx1310 nm, 10 km, LC)
RPS1800 Redundant Power System
BAT-4AHA (chargeable lithium battery)
BAT-8AHA (chargeable lithium battery)
PBB-12AHA (12AH lead-acid battery charger module)
CBTS3400 (temperature sensor, used for temperature compensation when the lead-acid battery is charged)
150 W AC power module (optional for battery LAN switches, used as the redundancy for the internal power module)
150 W DC power module (optional for battery LAN switches, used as the redundancy for the internal power module)


S5700S-LI


Product Description
S5700S-28P-LI-AC(24 Ethernet 10/100/1000 ports,4 Gig SFP,AC 110/220V)
S5700S-52P-LI-AC(48 Ethernet 10/100/1000 ports,4 Gig SFP,AC 110/220V)
RPS1800


S5700-SI

Product Description
S5700-24TP-PWR-SI(24 Ethernet 10/100/1000 PoE+ ports,4 of which are dual-purpose 10/100/1000 or SFP)
S5700-24TP-SI-AC(24 Ethernet 10/100/1000 ports,4 of which are dual-purpose 10/100/1000 or SFP,AC 110/220V)
S5700-24TP-SI-DC(24 Ethernet 10/100/1000 ports,4 of which are dual-purpose 10/100/1000 or SFP,DC -48V)
S5700-28C-SI(24 Ethernet 10/100/1000 ports,4 of which are dual-purpose 10/100/1000 or SFP,with 1 interface slot
S5700-28C-PWR-SI(24 Ethernet 10/100/1000 PoE+ ports,4 of which are dual-purpose 10/100/1000 or SFP,with 1 interface slot)
S5700-48TP-SI-AC(48 Ethernet 10/100/1000 ports,4 of which are dual-purpose 10/100/1000 or SFP,AC 110/220V)
S5700-48TP-SI-DC(48 Ethernet 10/100/1000 ports,4 of which are dual-purpose 10/100/1000 or SFP,DC -48V)
S5700-48TP-PWR-SI(48 Ethernet 10/100/1000 PoE+ ports,4 of which are dual-purpose 10/100/1000 or SFP)
S5700-52C-SI(48 Ethernet 10/100/1000 ports,with 1 interface slot)
S5700-52C-PWR-SI(48 Ethernet 10/100/1000 PoE+ ports,with 1 interface slot,with 500W AC power supply)
S5700-26X-SI-12S-AC(12 Ethernet 10/100/1000 ports,12 Gig SFP,2 10 Gig SFP+,AC 110/220V)
4 Gig SFP interface card(including 4 Gig SFP optical interface card and extend channel card)(used in S5700-SI series)
2 10 Gig SFP+ interface card(used in S5700-SI and S5700-EI series)
Copper Interface Card (50 meters distance supported )
4 10 Gig SFP+ optical interface card(including 4 10 Gig SFP+ interface card and extend channel card)(used in S5700-SI and S5700-EI series)
Ethernet Stack Interface Card(Including Stack Card,100cm Stack Cable)
Ethernet Stack Interface Card(Including stack card,300cm stack cable)
150W AC Power Module
150W DC Power Module
500W AC PoE Power Module
RPS1800


S5700-EI

Product Description
S5700-28C-EI-24S(24 Gig SFP ,4 of which are dual-purpose 10/100/1000 or SFP,with 1 interface slot
S5700-28C-EI(24 Ethernet 10/100/1000 ports,4 of which are dual-purpose 10/100/1000 or SFP,with 1 interface slot)
S5710-28C-EI(24 Ethernet 10/100/1000 ports,4 of which are dual-purpose 10/100/1000 or SFP,4 10 Gig SFP+)
S5700-28C-PWR-EI(24 Ethernet 10/100/1000 PoE+ ports,with 1 interface slot)
S5710-28C-PWR-EI-AC(24 Ethernet 10/100/1000 PoE+ ports,4 of which are dual-purpose 10/100/1000 or SFP,4 10 Gig SFP+)
S5710-52C-EI(48 Ethernet 10/100/1000 ports,4 10 Gig SFP+,with 2 interface slots
S5700-52C-EI(48 Ethernet 10/100/1000 ports,with 1 interface slot)
S5700-52C-PWR-EI(48 Ethernet 10/100/1000 PoE+ ports,with 1 interface slot)
S5710-52C-PWR-EI-AC(48 Ethernet 10/100/1000 PoE+ ports,4 10 Gig SFP+,with 2 interface slots,with 580W AC power supply)
S5710-52C-PWR-EI(48 Ethernet 10/100/1000 PoE+ ports,4 10 Gig SFP+,with 2 interface slots)
8 Gig SFP interface card(used in S5710-EI series)
8 Ethernet 10/100/1000 ports interface card(used in S5710-EI series)
4 Gig SFP interface card(including 4 Gig SFP optical interface card and extend channel card)(used in S5700-EI series)
2 10 Gig SFP+ interface card(used in S5710-EI series)
2 10 Gig SFP+ interface card(used in S5700-SI and S5700-EI series)
Copper Interface Card(50 meters distance supported )
4 10 Gig SFP+ optical interface card(including 4 10 Gig SFP+ interface card and extend channel card)(used in S5700-SI and S5700-EI series)
Ethernet Stack Interface Card(Including stack card,100cm stack cable)
Ethernet Stack Interface Card(Including stack card,300cm stack cable)
150W AC Power Module
150W DC Power Module
500W AC PoE Power Module
580W AC PoE Power Module
1150W AC PoE Power Module


S5700-HI

Product Description
S5700-28C-HI-24S(24 Gig SFP,with 1 interface slot)
S5700-28C-HI(24 Ethernet 10/100/1000 ports,with 1 interface slot)
S5710-108C-PWR-HI(48 Ethernet 10/100/1000 PoE+ ports,8 10 Gig SFP+,with 4 interface slots)

S5720-32C-HI-24S-AC(24 Gig SFP,8 of which are dual-purpose 10/100/1000 or SFP,4 10 Gig SFP+,with 2 interface slots,with 600W AC power supply)

S5720-56C-HI-AC(48 Ethernet 10/100/1000 ports,4 10 Gig SFP+,with 2 interface slots,with 600W AC power supply)

S5720-56C-PWR-HI-AC(48 Ethernet 10/100/1000 POE+ ports,4 10 Gig SFP+,with 2 interface slots,with 1150W AC power supply)

2 10 Gig SFP+ interface card(used in S5700-HI series)
4 10 Gig SFP+ interface card(used in S5700-HI series)
4 Gig SFP interface card(used in S5700-HI series)
4 10 Gig SFP+ Interface Card (used in S5720-HI series)
16 Gig SFP Interface Card(used in S5710-HI series)
16 Ethernet 10/100/1000 ports Interface Card(used in S5710-HI series)
4 40 Gig QSFP+ Interface Card(used in S5710-HI series)
4 10 Gig SFP+ Interface Card(used in S5710-HI series)
170W DC Power Module(used in S5700-HI series)
170W AC Power Module(used in S5700-HI series)
350W AC Power Module(used in S5710HI series)

350W DC Power Module

600W AC Power Module

1150W AC PoE Power Module

Resource-ES1SWL512AP0-WLAN Access Controller AP Resource License-512AP (used in S5720HI series)

Resource-ES1SWL128AP0-WLAN Access Controller AP Resource License-128AP (used in S5720HI series)

Resource-ES1SWL64AP00-WLAN Access Controller AP Resource License-64AP (used in S5720HI series)

Resource-ES1SWL16AP00-WLAN Access Controller AP Resource License-16AP (used in S5720HI series)

Resource-ES5SF4512K00-FIBv4 Resource License-128K (used in S5720HI series)

Resource-ES5SF4128K00-FIBv4 Resource License-512K (used in S5720HI series)

On Large-sized Enterprise Networks

The S5700 can function as an access device on a large-sized enterprise network or an aggregation device on a small-or medium-sized campus network. It supports link aggregation and dual-homing to improve network reliability.


In Data Centers

The S5700 can be used in a data center. It connects to gigabit servers and aggregates traffic from the servers to uplink devices through trunk links. If multiple servers are available, an S5700 stack can be used to facilitate network maintenance and improve network reliability.


1000 Mbit/s Access Rate for Terminals

Battery LAN Switches

The S5700-LI-BAT uses an internal lithium battery as the backup power supply. When a mains power failure occurs, the lithium battery begins powering the switch. When the mains power supply recovers, the switch automatically charges the lithium battery. The use of internal batteries ensures high reliability at the access layer in the case of frequent mains power failures.


Technology Topics


Related Products

Case Studies

DOCUMENTATION CENTER NEWS ROOM CASE STUDIES VIDEO ZONE PUBLICATIONS SHARE