IDS2000-M Medium Modular Data Center - Huawei Products
Under Construction!

Prompt

You have not logged in. Want to enter the login page?

Yes No

Prompt

Sorry that you are not authorized to download this document.

Apply Previous

Register an account

  • *
  • *
  • *
  • *
  • *
  • I agree that Huawei representatives may contact me.
  • I agree to receive information on Huawei products by email.
  • Terms of UsePrivacy Policy

If you already have a Huawei account, please login to download

IDS2000-M Medium Modular Data Center

IDS2000-M is a new generation modular data center solution. It adopts All-In-Room design and features high density modularization, optimal reliability and security, fast deployment, cost effectiveness, energy saving and excellent monitoring.
As an integrative solution, IDS2000-M is designed for the room area from 10m² to 60m². It integrates cabinet system, power supply and distribution system, cooling system, monitoring system and the cabling system. It can support 2 to 16 IT cabinets with the total nominal power capacity from 10kW to 132kW. IDS2000-M offers various options including single row or dual row deployment, as well as aisle containment or without aisle containment deployment.


High Density Modularization

Single rack supports rated power from 7kW to11 kW, which meets various customer requirements.



Simple and Low Consumption

The small data center is installed on a concrete floor rather than a raised floor. By using in-row air conditioners, which are close to heat sources, the cooling efficiency is improved greatly.



Excellent Monitoring

Various sensors monitor modules in the small data center constantly. The web-based monitoring system (with SSL supported) enables the modules to be remotely managed.



Optimal Reliability and Security

Tier II and Tier III configurations can be expanded to Tier III+ and Tier IV configurations. Modular UPS works in N+1 redundancy mode with long time battery backup to improve the reliability of the small data center.


IDS2000-M: specification

Item Specification



Cabinet
Standards IEC60297-1
Dimensions (H x W x D) 2000mm×600mm×1100mm
Installation space 42U
Protection level IP20


Power Distribution Frame
Rated Current 125A/250A/400A Optional
Voltage 3P 380V or 220V
Frequency 50Hz or 60Hz
Protection level IP20


In-row AC (T1 condition)
Cooling capacity 30kW/20kW
Refrigent R410A
Power 380V/50Hz
Operating temperature Indoor AC: 5-45°C
Outdoor AC: -30°C to +45°C


In-row AC (T3 condition)
Cooling capacity 30kW
Refrigent R407C
Power 380V/50Hz
Operating temperature Indoor AC: 5-45°C
Outdoor AC: -30°C to +55°C


CRAC
Cooling capacity 30kW/12.5kW
Refrigent R22/R407C
Power 380V/50Hz

Operating temperature
T1 condition:
Indoor AC: 5-45°C
Outdoor AC: -30°C to +45°C
T3 condition:
Indoor AC: 5-45°C
Outdoor AC: -30°C to +55°C






UPS
Type 20kVA rack-mounted UPS;
80KVA/120KVA modular UPS
Voltage 20kVA rack-mounted UPS:
3PH 380, 400, 415V
80kVA/120KVA modular UPS:
3PH 380V or 220V
Frequency 50Hz or 60Hz
Power factor ≥0.8
Efficiency with full load ≥94%
Noise(1 meter) ≤70dB
Protection level IP20

IDS2000-M Medium modular data center solution typical configuration:

1. Single-Row with Aisle Containment:

Applies to the scenario of 2-6 IT racks for high power density of 7-11kW per rack.


2. Single-Row without Aisle Containment

Applies to the scenario of 2-6 IT racks for low power density of 1-7kW per rack.


3. Dual-Row with Aisle Containment

Applies to the scenario of 4-16 IT racks for high power density of 7-11kW per rack.


4. Dual-Row without Aisle Containment

Applies to the scenario of 4-16 IT racks for low power density of 1-7kW per rack.



DOCUMENTATION CENTER NEWS ROOM CASE STUDIES VIDEO ZONE PUBLICATIONS SHARE