UPS8000-D Series (200-600 kVA) - Huawei Products
Under Construction!


You have not logged in. Want to enter the login page?

Yes No


Sorry that you are not authorized to download this document.

Apply Previous

Register an account

  • *
  • *
  • *
  • *
  • *
  • I agree that Huawei representatives may contact me.
  • I agree to receive information on Huawei products by email.
  • Terms of UsePrivacy Policy

If you already have a Huawei account, please login to download

UPS8000-D Series (200-600 kVA)

UPS8000-D series is an online sine-wave double-conversion UPS which features high performance. It is designed for large- and medium-sized computer rooms (for example, network computer rooms in the finance, communications, insurance, railway, medical, and mining industries, enterprises, and public institutions), large- and medium-sized industrial equipment (for example, measuring instruments and industrial automation equipment), precision instruments, emergency systems, and lighting systems.


  • Built-in output isolation transformer provides good electrical isolation, and ensures high adaptability to impulse load and stable output even in the most severe load disturbance
  • Wide input voltage range (240-480 Vac) enables UPS8000-D to be applicable for the worst electrical conditions
  • Backfeed protection technology ensures the safety of the system
  • Robust inverter ensures high overload capacity: 110% overload for 60min, 125% overload for 10min, 150% overload for 1min


  • The efficiency at online mode is higher than 94%, and for 25% load efficiency is up to 93%, as a result, UPS8000-D can save more energy than traditional UPSs in redundant configuration with low load rate
  • Intelligent hibernation technology minimizes the system power loss and helps the system operation at high efficiency at low load rate
  • Power walk-in technology boosts the proportion of UPS capacity to D.G. capacity to 1:1.1 and reduces CAPEX for customers
  • Low THDi of less than 3% minimizes the harmonic effect on the power grid


  • Maximally, 8 UPSs can be paralleled together to satisfy different power demand
  • Cascade technology enables two independent N+X parallel systems to be connected together in emergency.
  • Module design of power unit and front maintenance design make maintenance more simple


  • UPS8000-D supports various types of battery and provides four different control modes according to the battery type
  • LED and graphic LCD display facilitates operation and maintenance
  • Intelligent charging and discharging management, temperature compensation, and battery intelligent hibernation technology extend the battery life by 50%

Model UPS8000-D-200K UPS8000-D-300K UPS8000-D-400K UPS8000-D-500K UPS8000-D-600K
Rated Capacity 200kVA/180kW 300kVA/270kW 400kVA/360kW 500kVA/450kW 600 kVA/540 kW
Rated Voltage 380/400/415 Vac
Input Voltage Range 240-480 Vac; 360-480Vac for 100% load; 240 Vac for 65% load
Input Wiring 3Ph without neutral
Frequency Range 45-65 Hz
Total Harmonic Distortion THDi<3%
Input Power Factor 0.99
Bypass Voltage 380/400/415 Vac
Bypass Input Wiring 3Ph+N
Input Frequency ±2% (±1%-±6% adjustable)
Battery Voltage 480 Vdc
Output Wiring 3Ph+N
Rated Voltage 380/400/415 Vac±1%
Frequency Same as bypass(Online mode); 50/60 Hz±0.05%(Battery mode)
Waveform Sine wave; THDv<2%(100% linear load), THDv<3%(100% non-linear load)
Output Power Factor 0.9
Output Imbalance Voltage unbalanced degree: ±1%;Phase position unbalanced degree: ±1°
Efficiency 94%
Switch Time 0 ms
Overload Capacity Three phases: 110% overload for 60 min; 125% overload for 10 min; 150% overload for 1 min;
Single phase: 200% overload for 6 s
Operation Temperature 0-40 ℃
Storage Temperature -25-70 ℃
Relative Humidity 0%-95%(Non-condensing)
Maximum Operation Altitude ≤1000 m. Above 1000 m, derating of 1% each 100 m between 1000 m and 4000 m
Audible Noise <68 dB <72 dB
Height×Width×Depth (mm) 1900×1000×850 1900×1500×1000 1900×2100×1000
Weight 1000 kg 1550 kg 1720 kg 2525 kg 2700 kg
Communication Dry contacts, RS232, SNMP
Certifications TLC , CE


  • UPS8000-D-200K: 200 KVA / 180 KW; three-phase input and three-phase output
  • UPS8000-D-300K: 300 KVA / 270 KW; three-phase input and three-phase output
  • UPS8000-D-400K: 400 KVA / 360 KW; three-phase input and three-phase output
  • UPS8000-D-500K: 500 KVA / 450 KW; three-phase input and three-phase output
  • UPS8000-D-600K: 600 KVA / 540 KW; three-phase input and three-phase output
  • Choose UPS model and number according to the loads and UPS redundancy mode


  • Configure battery according to the load and the backup time.

Optional Components

Communication Card

  • Dry Contact: monitors the UPS over input and output signals
  • SNMP: monitors the UPS over the network
  • Modbus: monitors the UPS over the network

  • Component for parallel system

  • Parallel Kit: used for parallel
  • UGS: enables two single systems to be a dual-bus system
  • PSJ: enables two systems to be a whole system in emergency

  • Others

  • Cold Start Component: cold start components allow a UPS to start from the battery when there is no mains input
  • Battery Switch Box: recommend configuring battery switch box for each battery string, which can disconnect the battery from UPS when faults occur or UPS need repair
  • Battery Temperature Sensor: monitors the Temperatures of the batteries
  • Top Cable Entry Cabinet: enables cable routing from the top of the UPS8000-D