UPS5000-E Series (40-1280 kVA) - Huawei Products
Under Construction!

Prompt

You have not logged in. Want to enter the login page?

Yes No

Prompt

Sorry that you are not authorized to download this document.

Apply Previous

Register an account

  • *
  • *
  • *
  • *
  • *
  • I agree that Huawei representatives may contact me.
  • I agree to receive information on Huawei products by email.
  • Terms of UsePrivacy Policy

If you already have a Huawei account, please login to download

UPS5000-E Series (40-1280 kVA)

UPS5000-E is a high performance uninterruptible power system which can provide high efficient and reliable power protection to large / medium data centers. It features modular design and can output 40-1280 kVA power protection with rated capacity of 380/400/415 V AC. Benefiting from hot-swap design of key components that reduces mean time to repair greatly, the system reliability and availability is well improved.


Reliable

  • Wide input voltage and frequency range: 138-485Vac, 40-70Hz
  • 5kA lighting protection design on input port to reduce lightning-related failure rate
  • Redundant design and hot-swappable controllers, which improve the reliability of the whole system


Efficient

  • High efficiency at low load rate: 95%@20% load; 96%@40% load
  • Intelligent hibernation technology to improve operation efficiency and reduce the UPS power loss efficiently


Convenient

  • Hot swappable power modules, control modules, and bypass modules make module replacement time close to 0, which facilitates capacity expansion and maintenance
  • High power density of up to 40kVA/3U, and only 0.5 square meters taken up
  • High output power factor of up to 1 and 25% more load driven
  • The 7-inch colored LCD in standard configurations


Intelligent

  • Intelligent battery management to extend battery service time by 50%
  • Built-in SNMP card and HUAWEI Neteco 1000 software, easy to manage remotely
  • Various optional components to meet customized demands


Model UPS5000-E-120K-F120 UPS5000-E-200K-F200 UPS5000-E-320K-F320
Rated Capacity
(kVA / kW)
40/80/120 40/80/120/160/200 40/80/120/160/200/240/280/320
The Number of Power Modules 1/2/3 1/2/3/4/5 1/2/3/4/5/6/7/8
Height×Width×Depth 2000 mm × 600 mm × 850 mm
Weight 227-293 kg 227-359kg 227-480kg
Input
Input Wiring 3Ph+N+PE
Rated Voltage 380/400/415 V AC
Input Voltage Range 138-485 V AC; 305-485 V AC for 100% load; 305V-138 V AC for 100%-40% load (derating linearly)
Input Frequency Range 40-70 Hz
THDi (Total Harmonic Distortion of Input Current) THDi<3% (for linear load); THDi<5% (for nonlinear load)
Input Power Factor 0.99
Bypass Voltage 380/400/415 V AC
Bypass Input Wiring 3Ph+N+PE
Bypass Frequency Range 50/60±6 Hz
Battery Voltage 360-480 Vdc
Output
Output Wiring 3Ph+N+PE
Output Voltage 380/400/415 V AC±1%
Output Frequency Tracking the bypass input (online mode); 50/60 Hz±0.1% (battery mode)
Waveform Sine wave; THDv<1% for 100% linear load and THDv<3% for 100% nonlinear load
Output Power Factor 1
System Efficiency 96%
Overload Capacity Inverter: 110% overload for 60 minutes; 125% overload for 10 minutes; 150% overload for 1 minutes
Bypass: 135% overload for long term; >1000% overload for 100 ms
Environment
Operating Temperature 0-40℃
Storage Temperature -40-+70℃
Relative Humidity 0%-95% (non-condensing)
Operating Altitude 1000 m; above 1000 m, derating 1% for each additional 100 m
Audible Noise <65dB <68dB
Others
Certifications EN/IEC 62040-1; EN/IEC 62040-2; EN/IEC 62040-3; CE; CB; RoHS, REACH, WEEE, etc.
Communication Interfaces Dry Contacts, RS485, SNMP

The main optional components of UPS5000-E are shown in the table below:

Item Detail
Communication card -- Dry contact extended card
-- Backfeed protection card
Power distribution -- Input power distribution cabinet
-- Output power distribution cabinet
-- Battery switch box
-- Battery circuit breaker (BCB) box
Battery Management kit -- Battery monitoring unit
-- Battery ground fault detector
Environment -- Ambient temperature and humidity sensor
-- Battery temperature sensor
Mechanical kit -- Top outlet kit (for UPS5000-E-120K-F120 and UPS5000-E-120K-F200)
-- Top entry cabinet (for UPS5000-E-320K-F320)
-- IP21 component
-- Antiseismic kit

DOCUMENTATION CENTER NEWS ROOM CASE STUDIES VIDEO ZONE PUBLICATIONS SHARE