SmartAX MA5632 - Huawei Products
Under Construction!

Prompt

You have not logged in. Want to enter the login page?

Yes No

Prompt

Sorry that you are not authorized to download this document.

Apply Previous

Register an account

  • *
  • *
  • *
  • *
  • *
  • I agree that Huawei representatives may contact me.
  • I agree to receive information on Huawei products by email.
  • Terms of UsePrivacy Policy

If you already have a Huawei account, please login to download

SmartAX MA5632

The SmartAX MA5632 (MA5632 for short) is an Ethernet over Coax (EoC) head end product launched by Huawei and used in Cable bidirectional network restructuring solutions. The MA5632 uses the mainstream low-frequency HomePlug AV modulation technology and support IEEE P1901. Integrating the functions of ONU, EOC head end, and mixer, MA5632 provides features as small and easy installation, low nose and fan free, suitable for installed in poky space like corridor and basement.


  • First product integrating the functions of the ONU, EoC, and mixer in the industry, reducing network elements and IP resources and facilitating management, operation, and maintenance.
  • Flexible uplink configuration support GPON/EPON/GE, support two EOC modules configuration and supports a maximum of 128 users. Support two RF signals in and out.
  • Support Class C+ optical module, extend coverage to max 60Km or expand splitter ratio to max 1:128.
  • Have the capability to support IPV6 and multicast, ready for future network evolution.
  • Small size and weight for easy installation and maintenamce.
  • MA5632 adopt AR7410 chipset and supports 300Mbit/s bandwidth for a single channel, meets high-bandwidth requirements for multi service.
  • Strong compatibility with terminals: MA5632 is compatible with EoC terminals that use AR6400 and AR7400 chips.
  • Automatic adaptation to GPON and GE modes: The MA5632 provides two uplink ports using the small form-factor pluggable (SFP) optical modules, meeting different site requirements.
  • High reliability: nature heat exhaust without fan, 6KV lighting proof capability, support 60V and 220V two mode power supplies.
  • Strong adaptability to environment: With the operating temperature of –40℃ to 55℃, MA5632 can be installed in various scenarios.
  • Universal PON+EoC network management: The MA5632 supports ONU and EoC as a single network element, and its service provision can be finished one time. And MA5632 also supports batch deployment and remote upgrade of EoC head ends and terminals, meeting the end-to-end operation and maintenance requirements of network deployment, service provisioning, and fault diagnosis, and reducing operation expenditure (OPEX).

SmartAX MA5632
Dimensions
(W×D×H)
250mm × 180mm × 44mm
Network-side
port
1 * GPON/EPON/GE
User-side port 2*RF in and out
Operating
temperature
-40℃ to +55℃
Humidity 5% to 95% (non-condensing)
Heat
dissipation
mode
Not providing fans; passive cooling
Typical power consumption 15.2W
Power supply 220 V/110 V/60 V AC
Weight < 6.8 kg

The MA5632 and HG7042/HG7022 (EOC terminal) are used in the convergence of three networks (telecommunications, broadcast TV and Internet). MA5632 connects to the OLT through a PON uplink port, connects to the optical transceiver through a radio frequency (RF) port, and modulates broadband and TV signals over a coaxial cable. EoC terminals (the HG7042 and HG7022) are installed in users' homes. They extract broadband and TV signals from the cable, connect to TV sets through the TV output ports, and connect to PCs through FE ports.


SmartAX MA5632
GPON ITU G.984-compliance
32 T-CONTs
1024 GEM ports
Broadband 4096 VLANs, supporting QinQ and stacking VLANs
4096 MAC addresses
802.1p, supporting PQ and WRR flow control, and ACL
EoC key
specifications
Modulation technology: HomePlug AV
Physical layer rate: 500 Mbit/s; MAC layer rate: 300 Mbit/s
Frequency band range: 7.5 MHz to 65 MHz
Modulation modes: OFDM, 1024/256/64/16 QAM, QPSK, and BPSK
Working modes: CSMA/CA and TDMA
RF port Maximum output level: 118 dBuv
Input and output impedance: 75 ohms
Echo loss: ≥19 dB
Receive sensitivity: -65 dBm
Channel isolation: ≥45 dB(at 7.5 MHz ~ 862 MHz)
Maximum current passed along the cable: 3 A
Security 128-bit AES encryption
PPPoE+ and DHCP option82
Static and dynamic MAC address binding
Anti-MAC and anti-IP spoofing; source MAC address and IP address filtering
Anti-DoS attack and firewall
Maintenance
and
management
SNMPv1, SNMPv2, and SNMPv3
Telnet and SSHv2
Remote and batch pre-deployment
Remote upgrade and monitoring

DOCUMENTATION CENTER NEWS ROOM CASE STUDIES VIDEO ZONE PUBLICATIONS SHARE